Big Horn #0, #10 , #20 Beech Wood Joining Biscuits Set – 50 Pcs
Original price was: $10.58.$8.25Current price is: $8.25.
Big Horn 14207 #0, #10, #20 Beech Wood Joining Biscuits Set – 50 Pcs Each Size. Consistent and uniform from size to size, the Big Horn Assorted Biscuits is a collection of biscuits you can use for a variety of different woodworking projects. These helpful little pieces of beechwood stay in their original shape and size until they soak up water-based glues, resulting in a tighter wood joint.
Big Horn #14207 Specifications
- Zoro #: G904394271
- Mfr #: 14207
- Color: Brown
- Material: Wood
- Country of Origin (subject to change): China
Related Products
Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suction strongest where dust is being produced, thus maximizing dust extraction. Outer case made from cast aluminum with sliding steel gate and locking knob. Typical gate allow debris to accumulate in the groove preventing the gate from closing fully, causing leaking and reducing suction. The slot on these units extends through the back of the base to allow debris to be pushed out of the groove and prevent buildup.
Use Big Horn's 4-Inch elbow to connect 2 4-Inch hoses at a 90 degree angle. Use with hose clamps (not included) for best connection.
Big Horn 11668 4 Inch Dust Collector Starter Kit. Get everything you need to connect your 4 in. dust collector to your shop equipment. This two-hose dust collector accessory kit lets you power up to two machines at the same time.
Facilitate shop clean-up with Big Horn's disposable plastic dust bags. Designed to fit Delta and other 16-1/2-Inch units, these bags are 16-1/2-Inches in diameter by 47-Inches high. 5 pack.
This Y-fitting from Big Horn is used on a 4-Inch hose to attach branch lines to more than one machine. The increased lateral air flow creates efficiency over other types of fittings. Use with hose clamps (not included) for best connection.
Use Big Horn's 4-inch plastic end cap for capping off unused dust fitting ends, such as one side of a Y on a dust collector. Allows you to redirect air flow where needed. Made of polypropolene. Color may vary.
The Big Horn 11450 reducer's small diameter of 2 inch duplicates the 2 inch opening on your vacuum. Insert the vacuum brand hose to the vacuum and the other end to one of these fittings to power the dust collection system. The larger diameter of the reducer matches our standard dust collection hose to function as regular reducers. These fittings provide a step down from a larger main line to smaller branch lines. This step-down increases air velocity near the machine where it's needed most. This reducer connects to a standard 4 inch dust collection hose and should be secured with a hose clamp.
Big Horn's 4-Inch by 10-foot Clear-Flex Hose is made of clear PVC. With a helix of heavy gauge wire, this quality 10-foot hose is ideally suited for connecting machines to your dust collection system. This very flexible hose will make a 90 degree turn with only a 6-Inch radius, and unlike hoses made completely of plastic, the wire cord supporting this hose can be grounded to the machine for dissipation of static charges. Please note: when fully extended this clear PVC flexible hose measures 10-foot, but relaxed length will vary, depending on your application. Use hose clamps (not included) for best connection.
4 Inch x 50 Feet Clear Flex Hose. This dust hose is made in the USA from clear plastic with a heavy duty white helix wire frame. Interior of hose is smooth for better flow of debris. This hose has anti-static properties resulting from a blend of polyethylene compounds and carbon fillers making a static conductive compound which is extruded into the hose, helping to eliminate static build up.
Use this dust hood from Big Horn with your 4-Inch hose in your shop to help breath easier and create a healthier, cleaner environment. Excellent choice for locations where a smaller, rectangular dust hood is needed. Use with a hose clamp (not included) for best connection.
Power Tool Vacuum Hose Assembly. Flexible hose assembly offers a simple connection between your shop vacuum and your portable power tools or specialty jigs equipped with 1" OD or 30mm ID dust ports.
Big Horn's 6-Inch by 4-Inch by 4-Inch Y-connector is used to branch off your dust collection line like a regular Y-connector, while reducing your branch offs down to 4-Inch. For best connection use hose clamps (not included).
Reviews
There are no reviews yet.