Big Horn Jointer Knife Setting Jig
Original price was: $42.23.$29.56Current price is: $29.56.
Big Horn 19614 Jointer Knife Setting Jig Solid brass bars and polished steel rods make this one of the nicest knife setting jigs available. High strength magnets hold them in place while you precisely set jointer knives to prevent end snipe on your work pieces.
Big Horn #19614 Specifications
- Zoro #: G504396897
- Mfr #: 19614
- Material: Steel
- Color: Golden &Silver
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suction strongest where dust is being produced, thus maximizing dust extraction. Outer case made from cast aluminum with sliding steel gate and locking knob. Typical gate allow debris to accumulate in the groove preventing the gate from closing fully, causing leaking and reducing suction. The slot on these units extends through the back of the base to allow debris to be pushed out of the groove and prevent buildup.
Use Big Horn's 4-Inch elbow to connect 2 4-Inch hoses at a 90 degree angle. Use with hose clamps (not included) for best connection.
Use Big Horn's 2-1/2-Inch plastic blast gate to control air flow. Open the easy sliding gate to allow air flow only to the machine you are working with. Fits a standard 2-1/2-Inch hose. Use hose clamps (not included) for best connection.
Big Horn 11781 5-pk 20" Dia. Clear Plastic Dust Collection Bag 32" x 42" – Replaces Delta 50-891. Facilitate shop clean-up with Big Horn's disposable plastic dust bags. Designed to fit Delta, Jet, and other 20-Inch units, these bags are 20-Inches in diameter by 42-Inches high.
Create healthier work environment-Converts your single stage dust collector into a 2-stage unit-Use with standard 5-gallon bucket-Collect larger and heavier shavings and chips-Empty dust bags less often!
Big Horn 11760 30 Micron Replacement Filter Bag (OB101) for DC1000 & similar 1 HP Dust Collectors.
Use Big Horn's 4-Inch 45 degree elbow to join 4-Inch hose at a 45 degree angle to prevent kinking in your hose. Use two elbows joined with Big Horn's 11421 Coupling, (sold separately) to create a wide sweeping 90 degree turn with minimal flow restriction. Use with hose clamps (not included) for best connection.
Big Horn 11422 4 Inch Rubber Connecting Tube with Stainless Steel Hose Clamps. Use Big Horn's 4-inch rubber coupling to connect 4-inch T and Y fittings together.
Big Horn's 6-Inch by 4-Inch by 4-Inch Y-connector is used to branch off your dust collection line like a regular Y-connector, while reducing your branch offs down to 4-Inch. For best connection use hose clamps (not included).
The Big Horn 11450 reducer's small diameter of 2 inch duplicates the 2 inch opening on your vacuum. Insert the vacuum brand hose to the vacuum and the other end to one of these fittings to power the dust collection system. The larger diameter of the reducer matches our standard dust collection hose to function as regular reducers. These fittings provide a step down from a larger main line to smaller branch lines. This step-down increases air velocity near the machine where it's needed most. This reducer connects to a standard 4 inch dust collection hose and should be secured with a hose clamp.
Use Big Horn's 4-inch plastic end cap for capping off unused dust fitting ends, such as one side of a Y on a dust collector. Allows you to redirect air flow where needed. Made of polypropolene. Color may vary.
Big Horn 11407 4 Inch Trigeminal Tube Coupler Adapter. For best connection use hose clamp (not included).
Reviews
There are no reviews yet.