Big Horn Planer Knife Setting Jig
Original price was: $93.25.$74.60Current price is: $74.60.
Big Horn 19612 Planer Knife Setting Jig. Set planer knives quickly and accurately with these magnetized setting jigs. The jig holds knives tightly in position while both hands are free to adjust the jigs and cutterhead. Keeps knives in perfect alignment while setting and fits planer knives from 12" to 26". Pair comes in wood box and full color display box.
Big Horn #19612 Specifications
- Zoro #: G204396883
- Mfr #: 19612
- Color: Gray,Black & Golden
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
The Big Horn 11450 reducer's small diameter of 2 inch duplicates the 2 inch opening on your vacuum. Insert the vacuum brand hose to the vacuum and the other end to one of these fittings to power the dust collection system. The larger diameter of the reducer matches our standard dust collection hose to function as regular reducers. These fittings provide a step down from a larger main line to smaller branch lines. This step-down increases air velocity near the machine where it's needed most. This reducer connects to a standard 4 inch dust collection hose and should be secured with a hose clamp.
Use Big Horn's 4-inch plastic end cap for capping off unused dust fitting ends, such as one side of a Y on a dust collector. Allows you to redirect air flow where needed. Made of polypropolene. Color may vary.
Big Horn 11766 20" Dia 30 Micron Dust Filter Bag (OB102) 20" x 32" Long.
Big Horn 11668 4 Inch Dust Collector Starter Kit. Get everything you need to connect your 4 in. dust collector to your shop equipment. This two-hose dust collector accessory kit lets you power up to two machines at the same time.
Big Horn's 5-Inch by 4-Inch by 4-Inch Y-Adapter is used to branch off your dust collection line like a regular Y-adapter (connector), while reducing your branch offs down to 4-Inch. For best connection use hose clamp (not included).
Use this 10-Inch dust hood from Big Horn in your shop to help breath easier and create a healthier, cleaner environment. Place over, under, behind, or wherever convenient to your machine. 4-Inch outlet. Use with a hose clamp (not included) for best connection.
Use this dust hood from Big Horn with your 4-Inch hose in your shop to help breath easier and create a healthier, cleaner environment. Excellent choice for locations where a smaller, rectangular dust hood is needed. Use with a hose clamp (not included) for best connection.
Big Horn 11662 1-1/2 Inch x 12ft Shop Vacuum Hose Kit. Make quick work of your shop clean up with this Big Horn 12-foot Shop Vacuum Hose Kit. This kit offers a hose that is longer than standard vacuum hoses and it fits most common shop vacuums with a standard 2-1/4” inlet. The 1-1/2’ diameter, clear and flexible hose is reinforced with black poly helix which makes it crush resistant and allows you to see any blockages. The flexible cuffs at each end connect to tools and shop vacuum inlet adapter. The Crevice tool (2” x 15”) gets inside hard-to-reach areas and the Wide-Angle Bench Tool (4” x 12”) is perfect for the bigger messes in your work area.
Our very popular 13-Inch by 16-Inch dust hood with its extra large opening helps solve dust collection from most machines without hoods. Made of tough ABS plastic with a 4-Inch port to connect to any dust collection system.
Big Horn 11258 2-1/2 Inch Self Cleaning Blast Gate for Vacuum/Dust CollectorManufacturer and Model Information: Model # 11258 by Big HornProduct Description: Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suction strongest where dust is being produced, thus maximizing dust extraction. Outer case made from cast aluminum with sliding steel gate and locking knob. Typical gate allow debris to accumulate in the groove preventing the gate from closing fully, causing leaking and reducing suction. The slot on these units extends through the back of the base to allow debris to be pushed out of the groove and prevent buildup. Features: Features a locking knob to ensure the gate is set in the desired position. Maximizes the efficiency of dust collection system by directly the air flow from one machine to another2-1/2” O. DEasy sliding gate action saves your effort and timeAluminum construction with steel gateDimensions (L x W x H): 7" x 4" x 2"
Big Horn 11100 14" x 14" Hood. This 14-Inch by 14-Inch dust hood from Big Horn can easily be adapted to mount directly under the blade on most contractor-type table saws with open stands. 4-Inch outlet. Use with a hose clamp (not included) for best connection.
Big Horn 11296 2-1/2" x 10' Black Dust Hose. This dust hose is made in the USA. Interior of hose is smooth for better flow of debris. The anti-static properties are a blend of polyethylene compounds and added fillers of carbon to make a static conductive compound which is then extruded into the hose.
Reviews
There are no reviews yet.