Cs Unitec Diamond Core Drill, 3-spd, 6in dia max
Original price was: $581.00.$98.99Current price is: $98.99.
Diamond Core Drill,3-spd,6in dia max
Cs Unitec #END 130/3.1 PO Specifications
- Zoro #: G0912211
- Mfr #: END 130/3.1 PO
- Item: Diamond Core Drill,3-spd,6in dia max
- Country of Origin (subject to change): Germany
Related Products
Drill, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 2800, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 10 in, Tool Weight 3.6 lb, Gear Train Single, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features Compact and Lightweight Design, Lock-On, Includes Chuck Key. The DWE1014 3/8" 0-2,800 rpm VS Drill with Keyed Chuck is compact and lightweight to increase comfort and reduce fatigue. Powerful 7 Amp motor drills at high speed according to the user's desired setting.
Drill Kit, Handle Style D-Handle, Chuck Size 1/2 in, No Load RPM 0 to 600/0 to 900, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 16 1/4 in, Tool Weight 10.3 lb, Gear Train Quadruple, Switch Type Trigger, Reversible Yes, Cord Length 8 ft, Features Carrying Case, Head and Handle Swivel 360 Degrees , Side Handle, Includes (1) Carrying Case, (1) RAD Assembly, (1) Side Handle
Wet Diamond Core Drill,2-5/8in dia max
Diamond Core Drill,18 Amp,6in dia max, Core Drill Type Core Drill Rig, Current 18 A, Column Height 21 3/4 in, Maximum Spindle Speed 450 RPM, Minimum Spindle Speed 450 RPM, Tool Weight 34 lb, Speed Setting No
When you need to drill a hole in concrete, this Milwaukee 4096 Diamond Coring Motor is the perfect tool for the job. The high-performance motor has a 4 4/5 hp and will deliver 450/900 RPM. The water swivel allows you to twist the cord into a position that prevents tangling and kinking. Clutch protection ensures that the core bit is not damaged by sudden stops or starts when drilling through concrete. This diamond coring rig motor has 20 amps and 120V AC voltage. It is corded and comes with a 10 in. core bit cap for concrete work. It also features an ergonomic handle with trigger switch for easy operation, as well as built-in overload protection that protects against overheating or burning out of your tool due to overload conditions on the job site. The Milwaukee Diamond Coring Rig Motor is one of those tools you just can't live without once you have used it.
The ETN 2001 P concrete core drill is ideal for hand-held drilling of concrete, reinforced concrete, brick, block and stone. This heavy-duty wet and dry diamond core drill has high torque output. Use hand-held or rig mounted. Two-speed gearbox provides the optimum RPM for hole sizes up to 4-inch diameter. Electronic torque limitation and speed control guarantee constant RPM even under load.
Drill, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 1200, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 12 in, Tool Weight 4.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes (1) Chuck Key With Holder
The 0370-20 close quarters angle drill provides a unique chuck angle for reaching into tight areas. Its large paddle trigger and textured grip area provides comfort and control in all positions. The angled cord exit keeps the cord out of the work area. The convenient forward/reverse lever is easy to use in close quarters.
Pro Surface Finisher Kit for Metal
General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 in, Spindle Taper 2MT, Motor HP 1 hp, Capacity Steel 5/8 in, Capacity Cast Iron 3/4 in, Drilling Capacity Wood Not Specified, Includes Motor, Drill Chuck and Key, Power Down Feed Included No, Voltage 120, Amps AC 10.0, Number of Speeds 16, Chuck Size 5/8 in, Spindle Speed 240 to 3200 rpm, Spindle Travel 3 5/32 in, Base Size 18 in x 11 in, Table Work Surface 12 in x 12 in, Hz 60, Phase 1, Number of T-Slots 2
Drill, Handle Style T-Handle, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyless, Tool Length 11 in, Tool Weight 5.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD215G 1/2" VSR Mid-Handle Grip Drill with Keyless Chuck has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.
The VARILEX® WSF 1800 boasts a powerful 15 Amp, 1710 W motor that has been designed and developed for heavy industrial use. The speed is infinitely adjustable between 2000 and 7600 RPM. A tachogenerator keeps the speed constant, even when the grinder is operating at full load. Sensitive variable-speed control makes the VARILEX® ideal for use with both flap discs and polishing discs, as well as grinding and cutting wheels, for applications ranging from grinding to blending, pre-polishing and polishing. he VARILEX® differs from a conventional angle grinder in its motor design to allow for exceptional performance at low RPM ? without motor overheating or burnout. This machine also offers the ability to change discs in seconds, without tools, using the patented EASY-LOCK clamping nut (see accessories) and spindle lock. ncludes:nn1 VARILEX® WSF 1800n110 V with 5/8"-11 spindlen1 Wheel guard for discs up to 5"n1 Carrying Casen1 EASY-LOCK SPEED NUTn2 PLANTEX® CERAMIC, 5", grit 40n2 PLANTEX®, 5", grit 40n2 PLANTEX® CERAMIC, 5", grit 60n2 PLANTEX®, 5", grit 60
Reviews
There are no reviews yet.