Cs Unitec Wet or Dry Core Drill, 2-spd, 4in D max
Original price was: $535.00.$95.99Current price is: $95.99.
The ETN 2001 P concrete core drill is ideal for hand-held drilling of concrete, reinforced concrete, brick, block and stone. This heavy-duty wet and dry diamond core drill has high torque output. Use hand-held or rig mounted. Two-speed gearbox provides the optimum RPM for hole sizes up to 4-inch diameter. Electronic torque limitation and speed control guarantee constant RPM even under load.
Cs Unitec #ETN 2001 P Specifications
- Zoro #: G0912169
- Mfr #: ETN 2001 P
- Item: Wet or Dry Core Drill,2-spd,4in D max
- Spindle Thread Size: 1-1/4″ x 7 UNC., 5/8″ x 11 UNC
- Maximum Spindle Speed: 1,570 RPM
- Power Source: Corded
- Number of Speed Settings: 2
- Core Drill Type: Core Drill Rig
- Adjustable Angle: Yes
- Minimum Spindle Speed: 800 RPM
- Spindle Screw Size: 5/8 in, 1 1/4 in
- Speed Setting: Yes
- Spindle Decimal Equivalent Screw Size: 0.625 in, 1.25 in
- Nominal Voltage: 115V AC
- Overload Protection Clutch: Yes
- Current: 15 A
- Number of Pieces: 4
- Angle-to-Surface: 45 Degrees to 90 Degrees
- Series: ETN
- Maximum Speed: 2,300 RPM
- Column Diameter: 2 in
- Maximum Core Bit Compatibility: 4 in
- Coring Capacity in Concrete: 4 in
- Application: Wet/Dry Drilling of Holes Up to 4 in Diameter in Concrete or Stone
- Country of Origin (subject to change): Germany
Related Products
General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 in, Spindle Taper 2MT, Motor HP 1 hp, Capacity Steel 5/8 in, Capacity Cast Iron 3/4 in, Drilling Capacity Wood Not Specified, Includes Motor, Drill Chuck and Key, Power Down Feed Included No, Voltage 120, Amps AC 10.0, Number of Speeds 16, Chuck Size 5/8 in, Spindle Speed 240 to 3200 rpm, Spindle Travel 3 5/32 in, Base Size 18 in x 11 in, Table Work Surface 12 in x 12 in, Hz 60, Phase 1, Number of T-Slots 2
The complete set for treating wooden surfaces. Strong transport case with PTX Eco Smart and a range of brush wheels for various wood structures. Suction cover for extracting grinding dust particles. 1 PTX Eco Smart machinen1 Carrying Case (P/N 40008)n1 Suction cover (P/N 40005)n1 Spacer ring (P/N 40007)n1 PTX stranded wire wheel (P/N 46301)n1 Bristle wheel (P/N 46101)n1 Fiber wheel (P/N 46400)
Drill Press Guard, Guard Style Telescoping, For Quill Diameter 1 3/4 in to 3 in, Guard Shape Curved, Guard Height 3 1/2 in to 6 1/4 in, Guard Width 4 5/8 in, Mount Type Drill-to-Fit, Body Material Polycarbonate
The MILWAUKEE® M18 FUELTM SUPER HAWG® 1/2" Right Angle Drill delivers next-generation performance with the power and speed to replace corded right angle drills. The cordless right angle drill generates corded power, works as fast as the corded competition, and delivers up to 100 2-9/16" holes through 6" beams per battery charge on an M18TM REDLITHIUMTM HIGH OUTPUTTM 6.0AH battery (not included). The Milwaukee SUPER HAWG® has a POWERSTATETM Brushless Motor, REDLINK PLUSTM electronics, and is powered by REDLITHIUMTM HIGH OUTPUTTM Batteries. The drill's all-metal 1/2" keyed chuck provides ultimate durability and long tool life. An all-metal side handle and LED light ensures optimal control and visibility. The M18 FUELTM SUPER HAWG® delivers the performance and run-time to complete single-family home rough-ins or the ability to rough-in multiple multi-family units on a single charge.
Swing Away Safety Guard, Max. Chuck Dia. (In.) 4 in, Max. Stroke (In.) 7 in, Min. Stroke (In.) 3 in, White
With a powerful 8.0 amp motor and 0-2, 800 RPM, the 3/8 in. drill has the power to perform even the toughest applications. Durability standard with an all metal gear case that protects the gears and provides superior support in high torque applications. The power and durability of Milwaukee's 3/8 in. drill make it the perfect tool for metal drilling, wood drilling and fastening applications.
Hollow Core Shaft Adapter for PTX
Pro Surface Finisher Kit for Metal
Diamond Core Drill,18 Amp,6in dia max, Core Drill Type Core Drill Rig, Current 18 A, Column Height 21 3/4 in, Maximum Spindle Speed 450 RPM, Minimum Spindle Speed 450 RPM, Tool Weight 34 lb, Speed Setting No
Wet Diamond Core Drill,2-5/8in dia max
The VARILEX® WSF 1800 boasts a powerful 15 Amp, 1710 W motor that has been designed and developed for heavy industrial use. The speed is infinitely adjustable between 2000 and 7600 RPM. A tachogenerator keeps the speed constant, even when the grinder is operating at full load. Sensitive variable-speed control makes the VARILEX® ideal for use with both flap discs and polishing discs, as well as grinding and cutting wheels, for applications ranging from grinding to blending, pre-polishing and polishing. he VARILEX® differs from a conventional angle grinder in its motor design to allow for exceptional performance at low RPM ? without motor overheating or burnout. This machine also offers the ability to change discs in seconds, without tools, using the patented EASY-LOCK clamping nut (see accessories) and spindle lock. ncludes:nn1 VARILEX® WSF 1800n110 V with 5/8"-11 spindlen1 Wheel guard for discs up to 5"n1 Carrying Casen1 EASY-LOCK SPEED NUTn2 PLANTEX® CERAMIC, 5", grit 40n2 PLANTEX®, 5", grit 40n2 PLANTEX® CERAMIC, 5", grit 60n2 PLANTEX®, 5", grit 60
Drill, Handle Style T-Handle, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyless, Tool Length 11 in, Tool Weight 5.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD215G 1/2" VSR Mid-Handle Grip Drill with Keyless Chuck has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.
Reviews
There are no reviews yet.