Dake Corporation Floor Drill Press, Belt Drive, 2 hp, 120 V, 18 in Swing, 9 Speed
Original price was: $429.00.$96.99Current price is: $96.99.
General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 18 in, Spindle Taper 3MT, Motor HP 2 hp, Capacity Steel 1 in, Capacity Cast Iron 1 in, Drilling Capacity Wood Not Specified, Includes Chuck Guard, Drift, HDPE Chip, Keyed Chuck, Power Down Feed Included No, Voltage 120, Amps AC 14.0, Number of Speeds 9, Chuck Size 5/8 in, Spindle Speed 270 to 2000 rpm, Spindle Travel 5 in, Base Size 23-5/8 in x 15 in, Table Work Surface 13-3/4 in x 13-3/4 in, Hz 60, Phase 1
Dake Corporation #977600-1 Specifications
- Zoro #: G5147222
- Mfr #: 977600-1
- Drill Press Product Grouping: General Purpose Drill Presses
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 18 in
- Voltage: 120
- Motor HP: 2 hp
- Chuck Size: 5/8 in
- Number of Speeds: 9
- Capacity Steel: 1 in
- Spindle Speed: 270 to 2000 rpm
- Corded/Banded: Corded
- Includes: Chuck Guard, Drift, HDPE Chip, Keyed Chuck
- Hz: 60
- Overall Height: 71 in
- Overall Width: 15 in
- Base Size: 23-5/8 in x 15 in
- Drilling Capacity Wood: Not Specified
- Table Work Surface: 13-3/4 in x 13-3/4 in
- Table Slot Size: 5/8 in
- Max. Spindle To Base: 49 1/4 in
- Corded/Cordless: Corded
- Capacity Cast Iron: 1 in
- Quill Dia.: 2 1/2 in
- Number of T-Slots: 2
- Power Down Feed Included: No
- Column Dia.: 3 5/8 in
- Amps AC: 14.0
- Phase: 1
- Spindle to Table: 28 3/8 in
- Overall Depth: 23 5/8 in
- Spindle Taper: 3MT
- Spindle Travel: 5 in
- Column Diameter: 3 5/8 in
- Radial Arm: No
- Maximum Spindle-to-Base Height: 49 1/4 in
- Drilling Capacity in Wood: 5/8 in
- Cord Length: 70″
- Number of Pieces: 5
- Current: 14 A
- Speed Control: Fixed
- Table Shape: Square
- Motor Voltage: 115V AC ; Single-Phase
- Quill Diameter: 2 1/2 in
- Base Length: 15 in
- Power Source: Corded
- Guard Included: Yes
- Drilling Capacity in Steel: 5/8 in
- Minimum Spindle Speed: 270 RPM
- Maximum Overall Height: 71 in
- Drill Press Application: Drilling
- Table Length: 13 1/4 in
- Coolant System: No
- Maximum Spindle-to-Table Height: 28 3/8 in
- Chuck Style: Keyed
- Table Width: 13 3/4 in
- Base Height: 23 5/8 in
- Number of Spindle Speeds: Variable
- Spindle-to-Column Distance: 7 1/16 in
- Chuck Capacity: 5/8 in
- Primary Material Application: Metal, Wood
- Speed Adjustment: Step Pulley
- Horsepower: 2 hp
- Spindle Speed Range: 270 RPM – 2,000 RPM
- Maximum Spindle Speed: 2,000 RPM
- Speed Range: 270 to 2,000 RPM
- Drill Spindle Travel: 5 in – 6 in
- Table Slot: Yes
- Drill Press Type: Floor Stand
- Nominal Voltage: 115V AC
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
With a powerful 8.0 amp motor and 0-2, 800 RPM, the 3/8 in. drill has the power to perform even the toughest applications. Durability standard with an all metal gear case that protects the gears and provides superior support in high torque applications. The power and durability of Milwaukee's 3/8 in. drill make it the perfect tool for metal drilling, wood drilling and fastening applications.
The MILWAUKEE® M18 FUELTM SUPER HAWG® 1/2" Right Angle Drill delivers next-generation performance with the power and speed to replace corded right angle drills. The cordless right angle drill generates corded power, works as fast as the corded competition, and delivers up to 100 2-9/16" holes through 6" beams per battery charge on an M18TM REDLITHIUMTM HIGH OUTPUTTM 6.0AH battery (not included). The Milwaukee SUPER HAWG® has a POWERSTATETM Brushless Motor, REDLINK PLUSTM electronics, and is powered by REDLITHIUMTM HIGH OUTPUTTM Batteries. The drill's all-metal 1/2" keyed chuck provides ultimate durability and long tool life. An all-metal side handle and LED light ensures optimal control and visibility. The M18 FUELTM SUPER HAWG® delivers the performance and run-time to complete single-family home rough-ins or the ability to rough-in multiple multi-family units on a single charge.
Drill, Handle Style T-Handle, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyless, Tool Length 11 in, Tool Weight 5.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD215G 1/2" VSR Mid-Handle Grip Drill with Keyless Chuck has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.
Swing Away Safety Guard, Max. Chuck Dia. (In.) 4 in, Max. Stroke (In.) 7 in, Min. Stroke (In.) 3 in, White
This heavy duty impact resistant poly tank brings water to the diamond coring site when regular tap water is not available.
When you need to drill a hole in concrete, this Milwaukee 4096 Diamond Coring Motor is the perfect tool for the job. The high-performance motor has a 4 4/5 hp and will deliver 450/900 RPM. The water swivel allows you to twist the cord into a position that prevents tangling and kinking. Clutch protection ensures that the core bit is not damaged by sudden stops or starts when drilling through concrete. This diamond coring rig motor has 20 amps and 120V AC voltage. It is corded and comes with a 10 in. core bit cap for concrete work. It also features an ergonomic handle with trigger switch for easy operation, as well as built-in overload protection that protects against overheating or burning out of your tool due to overload conditions on the job site. The Milwaukee Diamond Coring Rig Motor is one of those tools you just can't live without once you have used it.
This heavy duty magnum drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 amp motor, 0 to 850 RPM trigger speed control, reversing, and a Quik-Lok cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites.
Electric Drill,1/2 In,450 rpm,7.0A
Diamond coring motors are used with Vac-U-Rig® and mooring diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 300 RPM or 600 RPM operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 in. to 14 in. in diameter.
Drill, Handle Style Spade, Chuck Size 1/2 in, No Load RPM 0 to 550, 9.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 15 1/2 in, Tool Weight 7.5 lb, Gear Train Triple, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 2-Conductor, Includes 2-Position Rear and 3-Position Side Handles and Holder
Power and torque, that's about all that needs to be said about the hole-haw line of drills. The compact design of this drill makes it perfect for drilling between studs and joists. This unit will handle up to a 4-5/8 in. Selfeed bit. An extra long pipe handle helps you control the power. Features two speed ranges, 1200 and 300 RPM, this will greatly increase the versatility of this drill. Hi-torque and hi-speed make this the perfect choice for the heavy duty user. Powerful 7.5 amp motor. Powerful, yet compact for large hole drilling between joists and studs.
Drill, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 2500, 8.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyless, Tool Length 9 1/2 in, Tool Weight 4.1 lb, Gear Train Single, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 2-Conductor, Includes Belt Hook, Soft Grip Handle. The DWD112 3/8" VSR Pistol Grip Drill with Keyless Chuck has a powerful 8 Amp motor to deliver 0-2,500 rpm speed for heavy-duty applications. Features solid bit retention and a soft grip handle design for comfort.
Reviews
There are no reviews yet.