Dayton Bench Drill Press, Belt Drive, 1/3 hp, 120 V, 8 in Swing, 5 Speed
Original price was: $236.92.$97.99Current price is: $97.99.
General Purpose Drill Presses, Bench Drill Press, Drive Type Belt, Swing 8 in, Spindle Taper 33JT, Motor HP 1/3 hp, Capacity Steel 1/2 in, Capacity Cast Iron 1/2 in, Drilling Capacity Wood Not Specified, Includes Chuck with Key, Power Down Feed Included No, Voltage 120, Amps AC 2.3, Number of Speeds 5, Chuck Size 1/2 in, Spindle Speed 750 to 3200 rpm, Spindle Travel 2 in, Base Size 7 in x 10-3/4 in, Table Work Surface 6-1/2 in x 6-1/2 in, Hz 60, Phase 1, Number of T-Slots 0
Dayton #40PM08 Specifications
- Zoro #: G2096468
- Mfr #: 40PM08
- Drill Press Product Grouping: General Purpose Drill Presses
- Item: Bench Drill Press
- Drive Type: Belt
- Swing: 8 in
- Voltage: 120
- Motor HP: 1/3 hp
- Chuck Size: 1/2 in
- Number of Speeds: 5
- Capacity Steel: 1/2 in
- Spindle Speed: 750 to 3200 rpm
- Drilling Capacity Wood: Not Specified
- Capacity Cast Iron: 1/2 in
- Spindle to Table: 8 1/4 in
- Power Down Feed Included: No
- Base Size: 7 in x 10-3/4 in
- Includes: Chuck with Key
- Corded/Cordless: Corded
- Overall Depth: 17 in
- Column Dia.: 1 13/16 in
- Overall Height: 23 in
- Max. Spindle To Base: 11 1/2 in
- Phase: 1
- Quill Dia.: 1 37/64 in
- Table Work Surface: 6-1/2 in x 6-1/2 in
- Table Slot Size: 1/2 in
- Number of T-Slots: 0
- Tilting Angle: 45 Degrees
- Corded/Banded: Corded
- Amps AC: 2.3
- Overall Width: 8 in
- Spindle Taper: JT33
- Spindle Travel: 2 in
- Hz: 60
- Speed Range: 750 to 3,200 RPM
- Base Width: 10 3/4 in
- Table Width: 6 1/2 in
- Speed Control: Fixed
- Spindle Speed Range: 750 RPM – 3,200 RPM
- Maximum Spindle-to-Base Height: 11 1/2 in
- Minimum Spindle Speed: 750 RPM
- Radial Arm: No
- Maximum Overall Height: 23 in
- Motor Voltage: 115V AC ; Single-Phase
- Speed Control – Merch: Fixed Speed
- Horsepower: 1/3 hp
- Table Tilt: 45 Degrees Left and Right
- Current: 2.3 A
- Drill Press Application: Countersinking, Drilling, Reaming
- Coolant System: No
- Maximum Spindle-to-Table Height: 8 1/4 in
- Overall Length: 17 in
- Column Diameter: 1 13/16 in
- Primary Material Application: Metal, Wood
- Table Slot: Yes
- Drilling Capacity in Steel: 1/2 in
- Guard Included: No
- Drilling Capacity in Cast Iron: 1/2 in
- Nominal Voltage: 115V AC
- Downfeed Type: Manual
- Table Length: 6 1/2 in
- Quill Diameter: 1 37/64 in
- Chuck Style: Keyed
- Base Length: 7 in
- Speed Adjustment: Step Pulley
- Table Slot Width: 1/2 in
- Table Shape: Square
- Number of Spindle Speeds: 5
- Spindle-to-Column Distance: 4 in
- Power Source: Corded
- Drill Press Type: Benchtop
- Maximum Spindle Speed: 3,200 RPM
- Country of Origin (subject to change): China
Related Products
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,900 cfm, Operating Velocity Range (FPM) 11,800 fpm, Static Pressure Range (In.) 2.01 to 13, 7 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 18 A Amps AC, Hose Dia. (In.) 7 in, 85 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly for Operation at 230V Only, Fiberglass Lid with Hose and Clamps, Power Control Box
Hose Extension Kit For 2-Stage Collectors
Crank Handles, For Use With Grainger Item Number 13W881, Fits Brand DAYTON
Dust Collector, Two Stage Portable, 3-Phase, Max. Flow (CFM) 1,310 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.64 to 9, 2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 5.2 A Amps AC, Hose Dia. (In.) 6 in, 83 dBA dBA, Drum Dia. (In.) 22 a 24, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Metal Forming Machine, Bending Length (In.) 52 in, Cutting Width (In.) 52 in, Rolls Min. 2 3/8 in, Capacity of Mild Steel (Gauge) 16, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 2 1/2 in, 4 in, 7 in, 9 in, 10 in, 15 in, Dual Edge Adjustable And Reversible, Made Of Tool Steel Blade, Cast Iron, Die Carbon Steel, Steel Male, Sizes 1 in , 1 1/2 in , 2 in , 2 1/2 in , 4 in , 7 in , 9 in , 10 in , And 15 in , Continuous Female V Shaped Forming
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Engraving Bit, For Use With 2LKU6 Electric Engraver, Engraving, Grooving and Slotting, Tool Length 1.5, Tool Weight 0.4 lb, Includes 2 Pack, Package Quantity 2
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Reviews
There are no reviews yet.