Dayton Bench Drill Press, Geared Head Drive, 2 hp, 240 V, 18 in Swing, 8 Speed
Original price was: $536.00.$92.99Current price is: $92.99.
Production Drill Presses, Bench Drill Press, Drive Type Geared Head, Swing 18 in, Spindle Taper 3MT, Motor HP 2 hp, Capacity Steel 1 in, Capacity Cast Iron 1 in, Drilling Capacity Wood Not Specified, Includes Chuck Guard, Power Down Feed Included No, Voltage 240, Amps AC 10.0, Number of Speeds 8, Chuck Size 5/8 in, Spindle Speed 90 to 3480 rpm, Spindle Travel 5 in, Base Size 12-3/4 in x 13-3/4 in, Table Work Surface 12-29/32 in x 12-29/32 in, Hz 60, Phase 3, Number of T-Slots 2
Dayton #53UH01 Specifications
- Zoro #: G9189096
- Mfr #: 53UH01
- Item: Bench Drill Press
- Drive Type: Geared Head
- Swing: 18 in
- Voltage: 240
- Motor HP: 2 hp
- Chuck Size: 5/8 in
- Number of Speeds: 8
- Capacity Steel: 1 in
- Spindle Speed: 90 to 3480 rpm
- Spindle to Table: 17 3/4 in
- Drilling Capacity Wood: Not Specified
- Max. Spindle To Base: 24 in
- Corded/Banded: Corded
- Capacity Cast Iron: 1 in
- Number of T-Slots: 2
- Overall Width: 17 in
- Hz: 60
- Power Down Feed Included: No
- Spindle Taper: 3MT
- Overall Height: 51 in
- Overall Depth: 23 in
- Table Slot Size: 1/2 in
- Base Size: 12-3/4 in x 13-3/4 in
- Amps AC: 10.0
- Phase: 3
- Includes: Chuck Guard
- Column Dia.: 3 3/8 in
- Tilting Angle: Non-Tilting
- Spindle Travel: 5 in
- Table Work Surface: 12-29/32 in x 12-29/32 in
- Corded/Cordless: Corded
- Quill Dia.: 2 in
- Minimum Spindle Speed: 90 RPM
- Maximum Spindle Speed: 3,480 RPM
- Nominal Voltage: 230V AC
- Table Shape: Square
- Table Slot Width: 1/2 in
- Speed Control: Fixed
- Maximum Spindle-to-Base Height: 24 in
- Spindle Speed Range: 90 RPM – 3,480 RPM
- Drill Press Application: Boring, Countersinking, Drilling, Reaming, Tapping
- Drilling Capacity in Steel: 1 in
- Table Length: 12 7/8 in
- Horsepower: 2 hp
- Coolant System: No
- Downfeed Type: Manual
- Table Width: 12 7/8 in
- Table Slot: Yes
- Power Source: Corded
- Speed Control – Merch: Fixed Speed
- Drill Press Type: Benchtop
- Number of Spindle Speeds: 8
- Quill Diameter: 2 in
- Column Diameter: 3 3/8 in
- Current: 10 A
- Overall Length: 23 in
- Motor Voltage: 230V AC ; Three-Phase
- Base Width: 13 3/4 in
- Primary Material Application: Metal
- Base Length: 12 3/4 in
- Maximum Spindle-to-Table Height: 17 3/4 in
- Speed Adjustment: Knob
- Speed Range: 90 to 3,480 RPM
- Maximum Overall Height: 51 in
- Guard Included: Yes
- Spindle-to-Column Distance: 9 in
- Drilling Capacity in Cast Iron: 1 in
- Country of Origin (subject to change): China
Related Products
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Metal Forming Machine, Bending Length (In.) 52 in, Cutting Width (In.) 52 in, Rolls Min. 2 3/8 in, Capacity of Mild Steel (Gauge) 16, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 2 1/2 in, 4 in, 7 in, 9 in, 10 in, 15 in, Dual Edge Adjustable And Reversible, Made Of Tool Steel Blade, Cast Iron, Die Carbon Steel, Steel Male, Sizes 1 in , 1 1/2 in , 2 in , 2 1/2 in , 4 in , 7 in , 9 in , 10 in , And 15 in , Continuous Female V Shaped Forming
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 660, Min. Air Flow (CFM) 173.5, Operating Velocity Range (FPM) 6790 to 7970 +/-10 Percent, Static Pressure Range (In.) 4 to 8.5, 1 hp HP, 115/230 Voltage, 60 Hz, 1, 11 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) -, Height (In.) -, Width (In.) -, Depth (In.) -, Overall Height (In.) 72 in, Overall Width (In.) 15 in, Overall Depth (In.) 29 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 65 dBA, Drum Dia. (In.) –
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Hose Extension Kit For 2-Stage Collectors
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600, Operating Velocity Range (FPM) 9,450, Static Pressure Range (In.) 1.42 to 12, 5 hp HP, 230 Voltage, 60 Hz, 1, 22 Amps AC, Overall Height (In.) 117 45/64 in, Overall Width (In.) 32 1/2 in, Overall Depth (In.) 75 in, Hose Dia. (In.) 7 in, 83 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Dust Collector, Two Stage Portable, Max. Flow (CFM) 600 cfm, Operating Velocity Range (FPM) 5,500 fpm, Static Pressure Range (In.) 1.51 to 7.1, 3/4 hp HP, 115/230V AC Voltage, 60 Hz Hz, Single, 7.5 A Amps AC, Hose Dia. (In.) 4 in, 79 dBA dBA, Drum Dia. (In.) 18 in to 19 1/2 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord, Drum Not Included
Engraving Bit, For Use With 2LKU6 Electric Engraver, Engraving, Grooving and Slotting, Tool Length 1.5, Tool Weight 0.4 lb, Includes 2 Pack, Package Quantity 2
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Reviews
There are no reviews yet.