Dayton Floor Drill Press, Belt Drive, 1 1/2 hp, 120/240 V, 20 in Swing, 16 Speed
Original price was: $512.00.$91.99Current price is: $91.99.
Floor Drill Press, Primary Material Application Metal, Wood, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Boring, Countersinking, Drilling, Reaming, Speed Control Fixed, Speed Adjustment Step Pulley, Swing 20 in, Spindle-to-Column Distance 10 in, Horsepower 1 1/2 hp, Voltage 120/240V AC, Spindle Taper 3MT, Number of Speeds 16, Chuck Size 5/8 in, Chuck Style Keyed, Guard Included No, Coolant System No, Quill Diameter 2 7/16 in
Dayton #54ZW32 Specifications
- Zoro #: G9661488
- Mfr #: 54ZW32
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 20 in
- Voltage: 120/240
- Motor HP: 1 1/2 hp
- Chuck Size: 5/8 in
- Number of Speeds: 16
- Capacity Steel: 3/4 in
- Spindle Speed: 120 to 3605 rpm
- Includes: Chuck Key Holder, Chuck with Key, Depth Stop Gauge, LED Readout for Spindle Speeds, V-Belts
- Hz: 60
- Amps AC: 14.2/7.1
- Spindle to Table: 26 in
- Table Work Surface: 19-1/4 in x 18-3/8 in
- Spindle Travel: 6 in
- Max. Spindle To Base: 43 in
- Corded/Banded: Corded
- Power Down Feed Included: No
- Drilling Capacity Wood: Not Specified
- Overall Width: 20 1/2 in
- Tilting Angle: 45 Degrees
- Table Slot Size: 14 mm
- Column Dia.: 3 11/32 in
- Overall Height: 70 in
- Base Size: 24-1/2 in x 17 in
- Spindle Taper: 3MT
- Capacity Cast Iron: 1 in
- Phase: 1
- Number of T-Slots: 3
- Quill Dia.: 2 7/16 in
- Overall Depth: 34 1/2 in
- Corded/Cordless: Corded
- Power Source: Corded
- Speed Control: Fixed
- Maximum Spindle Speed: 3,605 RPM
- Speed Adjustment: Step Pulley
- Number of Spindle Speeds: 16
- Radial Arm: No
- Spindle Speed Range: 120 RPM – 3,605 RPM
- Table Length: 19 1/4 in
- Table Tilt: 45 Degrees
- Drill Press Type: Floor Stand
- Chuck Style: Keyed
- Table Slot: Yes
- Motor Voltage: 115/230V AC ; Single-Phase
- Table Width: 18 3/8 in
- Guard Included: No
- Quill Diameter: 2 7/16 in
- Maximum Overall Height: 70 in
- Maximum Spindle-to-Table Height: 26 in
- Spindle-to-Column Distance: 10 in
- Minimum Spindle Speed: 120 RPM
- Drill Press Application: Boring, Countersinking, Drilling, Reaming
- Coolant System: No
- Chuck Capacity: 5/8 in
- Horsepower: 1 1/2 hp
- Column Diameter: 3 3/8 in
- Speed Range: 120 to 3,605 RPM
- Base Length: 17 in
- Current: 14.2/7.1 A
- Maximum Spindle-to-Base Height: 43 in
- Drill Spindle Travel: 6 in – 7 in
- Number of Pieces: 6
- Table Shape: Rectangular
- Primary Material Application: Metal, Wood
- Base Height: 24 1/2 in
- Drilling Capacity in Steel: 3/4 in
- Nominal Voltage: 115/230V AC
- Country of Origin (subject to change): China
Related Products
Metal Forming Machine, Bending Length (In.) 52 in, Cutting Width (In.) 52 in, Rolls Min. 2 3/8 in, Capacity of Mild Steel (Gauge) 16, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 2 1/2 in, 4 in, 7 in, 9 in, 10 in, 15 in, Dual Edge Adjustable And Reversible, Made Of Tool Steel Blade, Cast Iron, Die Carbon Steel, Steel Male, Sizes 1 in , 1 1/2 in , 2 in , 2 1/2 in , 4 in , 7 in , 9 in , 10 in , And 15 in , Continuous Female V Shaped Forming
Dust Collector, Two Stage Portable, 3-Phase, Max. Flow (CFM) 1,310 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.64 to 9, 2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 5.2 A Amps AC, Hose Dia. (In.) 6 in, 83 dBA dBA, Drum Dia. (In.) 22 a 24, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,900 cfm, Operating Velocity Range (FPM) 11,800 fpm, Static Pressure Range (In.) 2.01 to 13, 7 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 18 A Amps AC, Hose Dia. (In.) 7 in, 85 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly for Operation at 230V Only, Fiberglass Lid with Hose and Clamps, Power Control Box
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 12 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Angle Gauge No, Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 550, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.93 to 5.8, 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 7.5 Amps AC, Chip Capacity (Microns) 10, Drum Capacity (Gal.) 40, Hose Dia. (In.) 4 in, 79 dBA, Drum Dia. (In.) -, 10 micron Filter Bag, Includes (1) 10-micron Bag, 3-prong Power Cord, 5-ft Wire-reinforced PVC Inlet Hose and Clamps, Sheet Metal Back-port Pick-up Nozzle and 8-feet
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Hose Extension Kit For 2-Stage Collectors
Dust Collector, Single Stage, Max. Flow (CFM) 650, Min. Air Flow (CFM) 650, Operating Velocity Range (FPM) 6,300, Static Pressure Range (In.) 6.50, 3/4 hp HP, 120 Voltage, 60 Hz, 1, 4.5 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 22, Height (In.) 61 in, Width (In.) 19 3/4 in, Depth (In.) 35 1/2 in, Overall Height (In.) 61 in, Overall Width (In.) 19 3/4 in, Overall Depth (In.) 35 1/2 in, Max. Hose Length (Ft.) 6.5, Hose Dia. (In.) 4 in, 88 dBA, Drum Dia. (In.) 15-3/4
Crank Handles, For Use With Grainger Item Number 13W881, Fits Brand DAYTON
Reviews
There are no reviews yet.