Dayton Floor Drill Press, Belt Drive, 1/2 hp, 120/240 V, 15 in Swing, 16 Speed
Original price was: $415.00.$98.99Current price is: $98.99.
Floor Drill Press, Primary Material Application Metal, Wood, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Boring, Countersinking, Drilling, Reaming, Speed Control Fixed, Speed Adjustment Step Pulley, Swing 15 in, Spindle-to-Column Distance 7 1/2 in, Horsepower 1/2 hp, Voltage 120/240V AC, Spindle Taper 2MT, Number of Speeds 16, Chuck Size 5/8 in, Chuck Style Keyed, Guard Included No, Coolant System No, Quill Diameter 1 7/8 in
Dayton #54ZW30 Specifications
- Zoro #: G9661479
- Mfr #: 54ZW30
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 15 in
- Voltage: 120/240
- Motor HP: 1/2 hp
- Chuck Size: 5/8 in
- Number of Speeds: 16
- Capacity Steel: 1/2 in
- Spindle Speed: 138 to 3476 rpm
- Overall Width: 11 1/2 in
- Table Work Surface: 11-1/2 in x 11-1/2 in
- Drilling Capacity Wood: Not Specified
- Power Down Feed Included: No
- Corded/Banded: Corded
- Spindle Taper: 2MT
- Number of T-Slots: 6
- Tilting Angle: 45 Degrees
- Overall Depth: 26 3/4 in
- Table Slot Size: 14 mm
- Max. Spindle To Base: 47 in
- Overall Height: 67 in
- Amps AC: 8.6/4.3
- Column Dia.: 2 7/8 in
- Includes: Chuck Key Holder, Chuck with Key, Depth Stop Gauge, LED Readout for Spindle Speeds, V-Belts
- Base Size: 20 in x 13 in
- Phase: 1
- Quill Dia.: 1 7/8 in
- Spindle to Table: 26 in
- Capacity Cast Iron: 5/8 in
- Hz: 60
- Spindle Travel: 5 in
- Corded/Cordless: Corded
- Maximum Spindle-to-Base Height: 47 in
- Coolant System: No
- Spindle-to-Column Distance: 7 1/2 in
- Base Height: 20 in
- Drill Press Type: Floor Stand
- Radial Arm: No
- Horsepower: 1/2 hp
- Power Source: Corded
- Maximum Spindle-to-Table Height: 26 in
- Primary Material Application: Metal, Wood
- Motor Voltage: 115/230V AC ; Single-Phase
- Drilling Capacity in Steel: 1/2 in
- Quill Diameter: 1 7/8 in
- Speed Control: Fixed
- Current: 8.6/4.3 A
- Drill Press Application: Boring, Countersinking, Drilling, Reaming
- Maximum Spindle Speed: 3,476 RPM
- Base Length: 13 in
- Speed Range: 138 to 3,476 RPM
- Minimum Spindle Speed: 138 RPM
- Guard Included: No
- Number of Spindle Speeds: 16
- Table Width: 11 1/2 in
- Spindle Speed Range: 138 RPM – 3,476 RPM
- Table Length: 11 1/2 in
- Column Diameter: 2 7/8 in
- Drill Spindle Travel: 5 in – 6 in
- Table Shape: Square
- Number of Pieces: 6
- Speed Adjustment: Step Pulley
- Chuck Style: Keyed
- Maximum Overall Height: 67 in
- Table Tilt: 45 Degrees
- Table Slot: Yes
- Chuck Capacity: 5/8 in
- Nominal Voltage: 115/230V AC
- Country of Origin (subject to change): China
Related Products
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Dust Collector, Two Stage Portable, Max. Flow (CFM) 600 cfm, Operating Velocity Range (FPM) 5,500 fpm, Static Pressure Range (In.) 1.51 to 7.1, 3/4 hp HP, 115/230V AC Voltage, 60 Hz Hz, Single, 7.5 A Amps AC, Hose Dia. (In.) 4 in, 79 dBA dBA, Drum Dia. (In.) 18 in to 19 1/2 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord, Drum Not Included
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 12 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Angle Gauge No, Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Hose Extension Kit For 2-Stage Collectors
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Engraving Bit, For Use With 2LKU6 Electric Engraver, Engraving, Grooving and Slotting, Tool Length 1.5, Tool Weight 0.4 lb, Includes 2 Pack, Package Quantity 2
Dust Collector, Stationary, Max. Flow (CFM) 472 cfm, Operating Velocity Range (FPM) 2,300 fpm, Static Pressure Range (In.) 3.5, 1 1/2 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 10 A Amps AC, Height (In.) 32 in, Width (In.) 16 in, Depth (In.) 20 in, Overall Height (In.) 32 in, Overall Width (In.) 16 in, Overall Depth (In.) 20 in, Max. Hose Length (Ft.) 36 ft, Hose Dia. (In.) 2 3/8 in, 89 to 92 dBA dBA, Cord Length 5 ft, Cord Type 3 Prong Plug
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Reviews
There are no reviews yet.