Dayton Floor Drill Press, Belt Drive, 1 hp, 120/240 V, 17 in Swing, 16 Speed
Original price was: $405.00.$98.99Current price is: $98.99.
Floor Drill Press, Primary Material Application Metal, Wood, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Boring, Countersinking, Drilling, Reaming, Speed Control Fixed, Speed Adjustment Step Pulley, Swing 17 in, Spindle-to-Column Distance 8 1/2, Horsepower 1 hp, Voltage 120/240V AC, Spindle Taper 2MT, Number of Speeds 16, Chuck Size 5/8 in, Chuck Style Keyed, Guard Included No, Coolant System No, Quill Diameter 2 in, Drilling Capacity in Steel 1/2 in
Dayton #54ZW31 Specifications
- Zoro #: G9661463
- Mfr #: 54ZW31
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 17 in
- Voltage: 120/240
- Motor HP: 1 hp
- Chuck Size: 5/8 in
- Number of Speeds: 16
- Capacity Steel: 1/2 in
- Spindle Speed: 138 to 3476 rpm
- Spindle Taper: 2MT
- Base Size: 20 in x 13 in
- Table Slot Size: 14 mm
- Phase: 1
- Capacity Cast Iron: 5/8 in
- Quill Dia.: 2 in
- Corded/Banded: Corded
- Tilting Angle: 45 Degrees
- Overall Width: 14 3/8 in
- Hz: 60
- Includes: Chuck Key Holder, Chuck with Key, Depth Stop Gauge, LED Readout for Spindle Speeds, V-Belts
- Max. Spindle To Base: 45 1/2 in
- Power Down Feed Included: No
- Overall Height: 68 in
- Spindle to Table: 26 in
- Table Work Surface: 14 in x 14 in
- Overall Depth: 28 in
- Amps AC: 10.2/5.1
- Spindle Travel: 5 in
- Number of T-Slots: 2
- Drilling Capacity Wood: Not Specified
- Column Dia.: 3 1/8 in
- Corded/Cordless: Corded
- Quill Diameter: 2 in
- Spindle Speed Range: 138 RPM – 3,476 RPM
- Number of Pieces: 6
- Chuck Capacity: 5/8 in
- Table Slot: Yes
- Motor Voltage: 115/230V AC ; Single-Phase
- Drill Press Type: Floor Stand
- Maximum Spindle Speed: 3,476 RPM
- Maximum Spindle-to-Table Height: 26 in
- Coolant System: No
- Number of Spindle Speeds: 16
- Current: 10.2/5.1 A
- Maximum Overall Height: 68 in
- Speed Range: 138 to 3,476 RPM
- Spindle-to-Column Distance: 8 1/2
- Primary Material Application: Metal, Wood
- Drilling Capacity in Steel: 1/2 in
- Base Height: 20 in
- Column Diameter: 3 1/8 in
- Drill Press Application: Boring, Countersinking, Drilling, Reaming
- Chuck Style: Keyed
- Table Tilt: 45 Degrees
- Guard Included: No
- Horsepower: 1 hp
- Base Length: 13 in
- Table Shape: Square
- Table Width: 14 in
- Power Source: Corded
- Maximum Spindle-to-Base Height: 45 1/2 in
- Speed Adjustment: Step Pulley
- Table Length: 14 in
- Minimum Spindle Speed: 138 RPM
- Radial Arm: No
- Drill Spindle Travel: 5 in – 6 in
- Speed Control: Fixed
- Nominal Voltage: 115/230V AC
- Country of Origin (subject to change): China
Related Products
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 660, Min. Air Flow (CFM) 173.5, Operating Velocity Range (FPM) 6790 to 7970 +/-10 Percent, Static Pressure Range (In.) 4 to 8.5, 1 hp HP, 115/230 Voltage, 60 Hz, 1, 11 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) -, Height (In.) -, Width (In.) -, Depth (In.) -, Overall Height (In.) 72 in, Overall Width (In.) 15 in, Overall Depth (In.) 29 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 65 dBA, Drum Dia. (In.) –
Crank Handles, For Use With Grainger Item Number 13W881, Fits Brand DAYTON
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600, Operating Velocity Range (FPM) 9,450, Static Pressure Range (In.) 1.42 to 12, 5 hp HP, 230 Voltage, 60 Hz, 1, 22 Amps AC, Overall Height (In.) 117 45/64 in, Overall Width (In.) 32 1/2 in, Overall Depth (In.) 75 in, Hose Dia. (In.) 7 in, 83 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,900 cfm, Operating Velocity Range (FPM) 11,800 fpm, Static Pressure Range (In.) 2.01 to 13, 7 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 18 A Amps AC, Hose Dia. (In.) 7 in, 85 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly for Operation at 230V Only, Fiberglass Lid with Hose and Clamps, Power Control Box
Dust Collector, Stationary, Max. Flow (CFM) 472 cfm, Operating Velocity Range (FPM) 2,300 fpm, Static Pressure Range (In.) 3.5, 1 1/2 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 10 A Amps AC, Height (In.) 32 in, Width (In.) 16 in, Depth (In.) 20 in, Overall Height (In.) 32 in, Overall Width (In.) 16 in, Overall Depth (In.) 20 in, Max. Hose Length (Ft.) 36 ft, Hose Dia. (In.) 2 3/8 in, 89 to 92 dBA dBA, Cord Length 5 ft, Cord Type 3 Prong Plug
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 550, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.93 to 5.8, 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 7.5 Amps AC, Chip Capacity (Microns) 10, Drum Capacity (Gal.) 40, Hose Dia. (In.) 4 in, 79 dBA, Drum Dia. (In.) -, 10 micron Filter Bag, Includes (1) 10-micron Bag, 3-prong Power Cord, 5-ft Wire-reinforced PVC Inlet Hose and Clamps, Sheet Metal Back-port Pick-up Nozzle and 8-feet
Engraving Bit, For Use With 2LKU6 Electric Engraver, Engraving, Grooving and Slotting, Tool Length 1.5, Tool Weight 0.4 lb, Includes 2 Pack, Package Quantity 2
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Reviews
There are no reviews yet.