Dayton Floor Drill Press, Belt Drive, 1 hp, 120 V, 15 3/4 in Swing, 16 Speed
Original price was: $511.00.$98.99Current price is: $98.99.
Production Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 3/4 in, Spindle Taper 3MT, Motor HP 1 hp, Capacity Steel 1 in, Capacity Cast Iron 1 1/2 in, Drilling Capacity Wood Not Specified, Includes Chuck and Arbor, Safety Drill Guard, Halogen Work Light, Tool Ejector, Forward and Reverse Switch, Power Down Feed Included No, Voltage 120, Amps AC 15.0, Number of Speeds 16, Chuck Size 5/8 in, Spindle Speed 145 to 4800 rpm, Spindle Travel 4 1/4 in, Base Size 12-1/2 in x 12-1/2 in
Dayton #53UG98 Specifications
- Zoro #: G9536095
- Mfr #: 53UG98
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 15 3/4 in
- Voltage: 120
- Motor HP: 1 hp
- Chuck Size: 5/8 in
- Number of Speeds: 16
- Capacity Steel: 1 in
- Spindle Speed: 145 to 4800 rpm
- Table Slot Size: 1/2 in
- Quill Dia.: 2 in
- Overall Depth: 27 1/2 in
- Base Size: 12-1/2 in x 12-1/2 in
- Drilling Capacity Wood: Not Specified
- Spindle Taper: 3MT
- Tilting Angle: Non-Tilting
- Max. Spindle To Base: 50 1/4 in
- Overall Width: 17 3/4 in
- Includes: Chuck and Arbor, Safety Drill Guard, Halogen Work Light, Tool Ejector, Forward and Reverse Switch
- Table Work Surface: 12-9/16 in x 12-9/16 in
- Corded/Cordless: Corded
- Number of T-Slots: 2
- Overall Height: 67 3/4 in
- Spindle to Table: 33 3/4 in
- Power Down Feed Included: No
- Capacity Cast Iron: 1 1/2 in
- Column Dia.: 3 3/8 in
- Amps AC: 15.0
- Spindle Travel: 4 1/4 in
- Phase: 1
- Corded/Banded: Corded
- Hz: 60
- Spindle Speed Range: 145 RPM – 4,800 RPM
- Drill Press Type: Floor Stand
- Base Height: 12 1/2 in
- Number of Spindle Speeds: 16
- Reversible: Yes
- Base Length: 12 1/2 in
- Table Shape: Square
- Maximum Spindle-to-Table Height: 33 3/4 in
- Motor Voltage: 115V AC ; Single-Phase
- Maximum Overall Height: 67 3/4 in
- Maximum Spindle-to-Base Height: 50 1/4 in
- Table Length: 12 in
- Minimum Spindle Speed: 145 RPM
- Chuck Capacity: 5/8 in
- Speed Adjustment: Step Pulley
- Column Diameter: 3 3/8 in
- Table Slot: Yes
- Chuck Style: Keyed
- Number of Pieces: 8
- Table Width: 12 in
- Spindle-to-Column Distance: 8 in
- Horsepower: 1 hp
- Quill Diameter: 2 in
- Current: 15 A
- Speed Range: 145 to 4,800 RPM
- Power Source: Corded
- Coolant System: No
- Drill Press Application: Boring, Countersinking, Drilling, Reaming, Tapping
- Drilling Capacity in Steel: 1 in
- Speed Control: Fixed
- Drill Spindle Travel: 4 in – 5 in
- Guard Included: Yes
- Maximum Spindle Speed: 4,800 RPM
- Primary Material Application: Metal
- Nominal Voltage: 115V AC
- Country of Origin (subject to change): China
Related Products
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Metal Forming Machine, Bending Length (In.) 52 in, Cutting Width (In.) 52 in, Rolls Min. 2 3/8 in, Capacity of Mild Steel (Gauge) 16, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 2 1/2 in, 4 in, 7 in, 9 in, 10 in, 15 in, Dual Edge Adjustable And Reversible, Made Of Tool Steel Blade, Cast Iron, Die Carbon Steel, Steel Male, Sizes 1 in , 1 1/2 in , 2 in , 2 1/2 in , 4 in , 7 in , 9 in , 10 in , And 15 in , Continuous Female V Shaped Forming
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 660, Min. Air Flow (CFM) 173.5, Operating Velocity Range (FPM) 6790 to 7970 +/-10 Percent, Static Pressure Range (In.) 4 to 8.5, 1 hp HP, 115/230 Voltage, 60 Hz, 1, 11 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) -, Height (In.) -, Width (In.) -, Depth (In.) -, Overall Height (In.) 72 in, Overall Width (In.) 15 in, Overall Depth (In.) 29 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 65 dBA, Drum Dia. (In.) –
Dust Collector, Stationary, Max. Flow (CFM) 472 cfm, Operating Velocity Range (FPM) 2,300 fpm, Static Pressure Range (In.) 3.5, 1 1/2 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 10 A Amps AC, Height (In.) 32 in, Width (In.) 16 in, Depth (In.) 20 in, Overall Height (In.) 32 in, Overall Width (In.) 16 in, Overall Depth (In.) 20 in, Max. Hose Length (Ft.) 36 ft, Hose Dia. (In.) 2 3/8 in, 89 to 92 dBA dBA, Cord Length 5 ft, Cord Type 3 Prong Plug
Dust Collector, Two Stage Portable, 3-Phase, Max. Flow (CFM) 1,310 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.64 to 9, 2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 5.2 A Amps AC, Hose Dia. (In.) 6 in, 83 dBA dBA, Drum Dia. (In.) 22 a 24, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Engraving Bit, For Use With 2LKU6 Electric Engraver, Engraving, Grooving and Slotting, Tool Length 1.5, Tool Weight 0.4 lb, Includes 2 Pack, Package Quantity 2
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 12 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Angle Gauge No, Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Reviews
There are no reviews yet.