Dayton Floor Drill Press, Belt Drive, 1 hp, 120 V, 15 in Swing, 16 Speed
Original price was: $473.00.$94.99Current price is: $94.99.
General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 in, Spindle Taper 2MT, Motor HP 1 hp, Capacity Steel 5/8 in, Capacity Cast Iron 3/4 in, Drilling Capacity Wood Not Specified, Includes Motor, Drill Chuck and Key, Power Down Feed Included No, Voltage 120, Amps AC 10.0, Number of Speeds 16, Chuck Size 5/8 in, Spindle Speed 240 to 3200 rpm, Spindle Travel 3 5/32 in, Base Size 18 in x 11 in, Table Work Surface 12 in x 12 in, Hz 60, Phase 1, Number of T-Slots 2
Dayton #400H52 Specifications
- Zoro #: G2757680
- Mfr #: 400H52
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 15 in
- Voltage: 120
- Motor HP: 1 hp
- Chuck Size: 5/8 in
- Number of Speeds: 16
- Capacity Steel: 5/8 in
- Spindle Speed: 240 to 3200 rpm
- Spindle Travel: 3 5/32 in
- Column Dia.: 2 3/4 in
- Number of T-Slots: 2
- Amps AC: 10.0
- Includes: Motor, Drill Chuck and Key
- Overall Width: 14 in
- Spindle to Table: 26 in
- Corded/Cordless: Corded
- Table Slot Size: 9/16 in
- Spindle Taper: 2MT
- Max. Spindle To Base: 45 in
- Overall Depth: 25 in
- Corded/Banded: Corded
- Quill Dia.: 1 5/8 in
- Tilting Angle: 45 Degrees
- Overall Height: 64 in
- Drilling Capacity Wood: Not Specified
- Base Size: 18 in x 11 in
- Power Down Feed Included: No
- Phase: 1
- Table Work Surface: 12 in x 12 in
- Capacity Cast Iron: 3/4 in
- Hz: 60
- Drill Press Application: Countersinking, Drilling, Reaming
- Maximum Spindle-to-Table Height: 26 in
- Guard Included: No
- Power Source: Corded
- Drill Spindle Travel: 3 in – 4 in
- Table Length: 12 in
- Quill Diameter: 1 5/8 in
- Maximum Spindle Speed: 3,200 RPM
- Drilling Capacity in Steel: 5/8 in
- Coolant System: No
- Speed Range: 240 to 3,200 RPM
- Number of Pieces: 4
- Speed Control: Fixed
- Chuck Capacity: 5/8 in
- Base Height: 18 in
- Spindle-to-Column Distance: 7 1/2 in
- Table Tilt: 45 Degrees
- Drill Press Type: Floor Stand
- Speed Adjustment: Step Pulley
- Radial Arm: No
- Spindle Speed Range: 240 RPM – 3,200 RPM
- Column Diameter: 2 3/4 in
- Chuck Style: Keyed
- Motor Voltage: 115V AC ; Single-Phase
- Base Length: 11 in
- Minimum Spindle Speed: 240 RPM
- Primary Material Application: Metal, Wood
- Table Width: 12 in
- Current: 10 A
- Table Shape: Square
- Horsepower: 1 hp
- Maximum Spindle-to-Base Height: 45 in
- Number of Spindle Speeds: 16
- Maximum Overall Height: 64 in
- Table Slot: Yes
- Nominal Voltage: 115V AC
- Country of Origin (subject to change): China
Related Products
Dust Collector, Single Stage, Max. Flow (CFM) 1,490, Min. Air Flow (CFM) 1,490, Operating Velocity Range (FPM) 14,000, Static Pressure Range (In.) 11.50, 2 hp HP, 120/240 Voltage, 60 Hz, 1, 12.6 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 40, Height (In.) 33 1/2 in, Width (In.) 27 1/2 in, Depth (In.) 36 in, Overall Height (In.) 76 3/4 in, Overall Width (In.) 27 1/2 in, Overall Depth (In.) 36 1/2 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 80 dBA, Drum Dia. (In.) 19-3/4
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Hose Extension Kit For 2-Stage Collectors
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 1.47 to 7.3, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16/8 Amps AC, Hose Dia. (In.) 5 in, 82 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes One 5-feet Wire-reinforced PVC Inlet Hose and Clamps, 5-micron Dust Collector Bag and 8-feet Power Cord(Drum Not Included)
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Dust Collector, Stationary, Max. Flow (CFM) 472 cfm, Operating Velocity Range (FPM) 2,300 fpm, Static Pressure Range (In.) 3.5, 1 1/2 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 10 A Amps AC, Height (In.) 32 in, Width (In.) 16 in, Depth (In.) 20 in, Overall Height (In.) 32 in, Overall Width (In.) 16 in, Overall Depth (In.) 20 in, Max. Hose Length (Ft.) 36 ft, Hose Dia. (In.) 2 3/8 in, 89 to 92 dBA dBA, Cord Length 5 ft, Cord Type 3 Prong Plug
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 550, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.93 to 5.8, 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 7.5 Amps AC, Chip Capacity (Microns) 10, Drum Capacity (Gal.) 40, Hose Dia. (In.) 4 in, 79 dBA, Drum Dia. (In.) -, 10 micron Filter Bag, Includes (1) 10-micron Bag, 3-prong Power Cord, 5-ft Wire-reinforced PVC Inlet Hose and Clamps, Sheet Metal Back-port Pick-up Nozzle and 8-feet
Reviews
There are no reviews yet.