Dayton Floor Drill Press, Belt Drive, 1 hp, 230/460 V, 16 in Swing, 16 Speed
Original price was: $545.00.$95.99Current price is: $95.99.
Floor Drill Press, Primary Material Application Metal, Wood, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Boring, Countersinking, Drilling, Reaming, Speed Control Fixed, Speed Adjustment Step Pulley, Swing 16 in, Spindle-to-Column Distance 8 1/2, Horsepower 1 hp, Voltage 230/460V AC, Spindle Taper 2MT, Number of Speeds 16, Chuck Size 5/8 in, Chuck Style Keyed, Guard Included No, Coolant System No, Quill Diameter 2 in, Drilling Capacity in Steel 1/2 in
Dayton #55MJ87 Specifications
- Zoro #: G7593136
- Mfr #: 55MJ87
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 16 in
- Voltage: 230/460
- Motor HP: 1 hp
- Chuck Size: 5/8 in
- Number of Speeds: 16
- Capacity Steel: 1/2 in
- Spindle Speed: 138 to 3476 rpm
- Overall Depth: 27 in
- Power Down Feed Included: No
- Spindle to Table: 25 in
- Overall Height: 68 in
- Spindle Taper: 2MT
- Table Work Surface: 14-1/4 in x 14-1/4 in
- Amps AC: 5.0
- Corded/Cordless: Corded
- Column Dia.: 3 5/32 in
- Quill Dia.: 2 in
- Base Size: 11 in x 20 in
- Overall Width: 17 in
- Tilting Angle: 45 Degrees
- Includes: Chuck with Key
- Spindle Travel: 5 in
- Hz: 60
- Capacity Cast Iron: 5/8 in
- Phase: 3
- Max. Spindle To Base: 45 in
- Number of T-Slots: 2
- Table Slot Size: 14 mm
- Table Shape: Square
- Number of Pieces: 2
- Drilling Capacity in Steel: 1/2 in
- Minimum Spindle Speed: 138 RPM
- Number of Spindle Speeds: 16
- Guard Included: No
- Speed Control: Fixed
- Primary Material Application: Metal, Wood
- Column Diameter: 3 3/16 in
- Quill Diameter: 2 in
- Chuck Style: Keyed
- Coolant System: No
- Drill Press Application: Boring, Countersinking, Drilling, Reaming
- Spindle Speed Range: 138 RPM – 3,476 RPM
- Table Width: 14 1/4 in
- Power Source: Corded
- Maximum Spindle-to-Table Height: 25 in
- Drill Spindle Travel: 5 in – 6 in
- Speed Range: 138 to 3,476 RPM
- Speed Adjustment: Step Pulley
- Table Tilt: 45 Degrees
- Maximum Spindle-to-Base Height: 45 in
- Radial Arm: No
- Maximum Spindle Speed: 3,476 RPM
- Spindle-to-Column Distance: 8 1/2
- Horsepower: 1 hp
- Motor Voltage: 230/460V AC ; Three-Phase
- Maximum Overall Height: 68 in
- Chuck Capacity: 5/8 in
- Table Length: 14 1/4 in
- Base Height: 11 in
- Drill Press Type: Floor Stand
- Table Slot: Yes
- Base Length: 20 in
- Current: 5 A
- Nominal Voltage: 230/460V AC
- Country of Origin (subject to change): China
Related Products
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 1.47 to 7.3, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16/8 Amps AC, Hose Dia. (In.) 5 in, 82 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes One 5-feet Wire-reinforced PVC Inlet Hose and Clamps, 5-micron Dust Collector Bag and 8-feet Power Cord(Drum Not Included)
Dust Collector, Single Stage, Max. Flow (CFM) 650, Min. Air Flow (CFM) 650, Operating Velocity Range (FPM) 6,300, Static Pressure Range (In.) 6.50, 3/4 hp HP, 120 Voltage, 60 Hz, 1, 4.5 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 22, Height (In.) 61 in, Width (In.) 19 3/4 in, Depth (In.) 35 1/2 in, Overall Height (In.) 61 in, Overall Width (In.) 19 3/4 in, Overall Depth (In.) 35 1/2 in, Max. Hose Length (Ft.) 6.5, Hose Dia. (In.) 4 in, 88 dBA, Drum Dia. (In.) 15-3/4
Metal Brake With Stand, Bending Length (In.) 36 in, Cutting Width (In.) 36 in, Capacity of Mild Steel (Gauge) 16, Cast Steel, Attachable Stand
Hose Extension Kit For 2-Stage Collectors
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,900 cfm, Operating Velocity Range (FPM) 11,800 fpm, Static Pressure Range (In.) 2.01 to 13, 7 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 18 A Amps AC, Hose Dia. (In.) 7 in, 85 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly for Operation at 230V Only, Fiberglass Lid with Hose and Clamps, Power Control Box
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Reviews
There are no reviews yet.