Dayton Floor Drill Press, Belt Drive, 2 hp, 240 V, 15 3/4 in Swing, Variable Speed
Original price was: $561.00.$91.99Current price is: $91.99.
Production Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 3/4 in, Spindle Taper 3MT, Motor HP 2 hp, Capacity Steel 1 in, Capacity Cast Iron 1 1/2 in, Drilling Capacity Wood Not Specified, Includes Chuck and Arbor, Safety Drill Guard, Halogen Work Light, Tool Ejector, Forward and Reverse Switch, Digital Speed Display, Power Down Feed Included No, Voltage 240, Amps AC 10.0, Number of Speeds Variable, Chuck Size 5/8 in, Spindle Speed 35 to 5600 rpm, Spindle Travel 4 1/8 in
Dayton #53UG99 Specifications
- Zoro #: G9188965
- Mfr #: 53UG99
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 15 3/4 in
- Voltage: 240
- Motor HP: 2 hp
- Chuck Size: 5/8 in
- Number of Speeds: Variable
- Capacity Steel: 1 in
- Spindle Speed: 35 to 5600 rpm
- Spindle Travel: 4 1/8 in
- Overall Height: 69 in
- Spindle Taper: 3MT
- Base Size: 12-1/2 in x 12-1/2 in
- Corded/Cordless: Corded
- Hz: 60
- Drilling Capacity Wood: Not Specified
- Table Work Surface: 12-9/16 in x 12-9/16 in
- Number of T-Slots: 2
- Corded/Banded: Corded
- Spindle to Table: 33 3/4 in
- Includes: Chuck and Arbor, Safety Drill Guard, Halogen Work Light, Tool Ejector, Forward and Reverse Switch, Digital Speed Display
- Power Down Feed Included: No
- Table Slot Size: 1/2 in
- Max. Spindle To Base: 50 1/4 in
- Phase: 1
- Overall Width: 17 3/4 in
- Column Dia.: 3 3/8 in
- Capacity Cast Iron: 1 1/2 in
- Quill Dia.: 2 in
- Overall Depth: 27 1/2 in
- Amps AC: 10.0
- Tilting Angle: Non-Tilting
- Table Shape: Square
- Chuck Style: Keyed
- Maximum Spindle-to-Base Height: 50 1/4 in
- Maximum Overall Height: 69 in
- Quill Diameter: 2 in
- Table Slot: Yes
- Chuck Capacity: 5/8 in
- Speed Control: Variable
- Minimum Spindle Speed: 35 RPM
- Speed Adjustment: Knob
- Reversible: Yes
- Current: 10 A
- Base Length: 12 1/2 in
- Number of Pieces: 9
- Drill Spindle Travel: 4 in – 5 in
- Drill Press Application: Boring, Countersinking, Drilling, Reaming, Tapping
- Drill Press Type: Floor Stand
- Motor Voltage: 230V AC ; Single-Phase
- Table Length: 12 in
- Coolant System: Yes
- Speed Range: 35 to 5,600 RPM
- Spindle-to-Column Distance: 8 in
- Column Diameter: 3 3/8 in
- Primary Material Application: Metal
- Horsepower: 2 hp
- Spindle Speed Range: 35 RPM – 5,600 RPM
- Number of Spindle Speeds: Variable
- Maximum Spindle-to-Table Height: 33 3/4 in
- Power Source: Corded
- Base Height: 12 1/2 in
- Guard Included: Yes
- Maximum Spindle Speed: 5,600 RPM
- Table Width: 12 in
- Drilling Capacity in Steel: 1 in
- Nominal Voltage: 230V AC
- Country of Origin (subject to change): China
Related Products
Hose Extension Kit For 2-Stage Collectors
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Engraving Bit, For Use With 2LKU6 Electric Engraver, Engraving, Grooving and Slotting, Tool Length 1.5, Tool Weight 0.4 lb, Includes 2 Pack, Package Quantity 2
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 12 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Angle Gauge No, Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 1.47 to 7.3, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16/8 Amps AC, Hose Dia. (In.) 5 in, 82 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes One 5-feet Wire-reinforced PVC Inlet Hose and Clamps, 5-micron Dust Collector Bag and 8-feet Power Cord(Drum Not Included)
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Dust Collector, Stationary, Max. Flow (CFM) 472 cfm, Operating Velocity Range (FPM) 2,300 fpm, Static Pressure Range (In.) 3.5, 1 1/2 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 10 A Amps AC, Height (In.) 32 in, Width (In.) 16 in, Depth (In.) 20 in, Overall Height (In.) 32 in, Overall Width (In.) 16 in, Overall Depth (In.) 20 in, Max. Hose Length (Ft.) 36 ft, Hose Dia. (In.) 2 3/8 in, 89 to 92 dBA dBA, Cord Length 5 ft, Cord Type 3 Prong Plug
Metal Forming Machine, Bending Length (In.) 52 in, Cutting Width (In.) 52 in, Rolls Min. 2 3/8 in, Capacity of Mild Steel (Gauge) 16, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 2 1/2 in, 4 in, 7 in, 9 in, 10 in, 15 in, Dual Edge Adjustable And Reversible, Made Of Tool Steel Blade, Cast Iron, Die Carbon Steel, Steel Male, Sizes 1 in , 1 1/2 in , 2 in , 2 1/2 in , 4 in , 7 in , 9 in , 10 in , And 15 in , Continuous Female V Shaped Forming
Reviews
There are no reviews yet.