Dayton Floor Drill Press, Geared Head Drive, 2 hp, 230 V, 20 in Swing, Variable Speed
Original price was: $559.00.$98.99Current price is: $98.99.
Production Drill Presses, Floor Drill Press, Drive Type Geared Head, Swing 20 in, Spindle Taper 3MT, Motor HP 2 hp, Capacity Steel 1 in, Capacity Cast Iron 1 1/8 in, Drilling Capacity Wood Not Specified, Includes Chuck Guard with Limit Switch, Digital Speed Display, Halogen Work Light, Power Down Feed Included No, Voltage 230, Amps AC 6.5, Number of Speeds Variable, Chuck Size Not Included, Spindle Speed 54 to 3800 rpm, Spindle Travel 5 pulg., Base Size 13-3/4 in x 12-5/8 in
Dayton #467K97 Specifications
- Zoro #: G7132279
- Mfr #: 467K97
- Item: Floor Drill Press
- Drive Type: Geared Head
- Swing: 20 in
- Voltage: 230
- Motor HP: 2 hp
- Chuck Size: Not Included
- Number of Speeds: Variable
- Capacity Steel: 1 in
- Spindle Speed: 54 to 3800 rpm
- Tilting Angle: Non-Tilting
- Amps AC: 6.5
- Quill Dia.: 2 7/16 in
- Includes: Chuck Guard with Limit Switch, Digital Speed Display, Halogen Work Light
- Capacity Cast Iron: 1 1/8 in
- Drilling Capacity Wood: Not Specified
- Column Dia.: 3 5/8 in
- Overall Width: 15 in
- Table Work Surface: 15-1/2 in x 14-13/16 in
- Table Slot Size: 14 mm
- Power Down Feed Included: No
- Base Size: 13-3/4 in x 12-5/8 in
- Overall Depth: 25 in
- Number of T-Slots: 6
- Corded/Banded: Corded
- Phase: 3
- Corded/Cordless: Corded
- Spindle to Table: 34 1/2 in
- Hz: 60
- Spindle Travel: 5 in
- Spindle Taper: 3MT
- Overall Height: 81 in
- Max. Spindle To Base: 47 in
- Maximum Spindle-to-Base Height: 47 in
- Current: 6.5 A
- Primary Material Application: Metal
- Number of Spindle Speeds: Variable
- Maximum Spindle Speed: 3,800 RPM
- Maximum Spindle-to-Table Height: 34 1/2 in
- Speed Range: 54 to 3,800 RPM
- Table Shape: Rectangular
- Spindle Speed Range: 54 RPM – 3,800 RPM
- Drill Press Type: Floor Stand
- Table Length: 15 1/2 in
- Minimum Spindle Speed: 54 RPM
- Number of Pieces: 4
- Power Source: Corded
- Guard Included: Yes
- Horsepower: 2 hp
- Base Height: 13 3/4 in
- Drill Spindle Travel: 5 in – 6 in
- Spindle-to-Column Distance: 10 in
- Table Width: 14 7/8 in
- Drilling Capacity in Steel: 1 in
- Base Length: 12 5/8 in
- Coolant System: No
- Column Diameter: 3 5/8 in
- Maximum Overall Height: 81 in
- Motor Voltage: 230V AC ; Three-Phase
- Speed Control: Variable
- Drill Press Application: Boring, Countersinking, Drilling, Reaming, Tapping
- Table Slot: Yes
- Quill Diameter: 2 7/16 in
- Nominal Voltage: 230V AC
- Country of Origin (subject to change): China
Related Products
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Dust Collector, Stationary, Max. Flow (CFM) 472 cfm, Operating Velocity Range (FPM) 2,300 fpm, Static Pressure Range (In.) 3.5, 1 1/2 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 10 A Amps AC, Height (In.) 32 in, Width (In.) 16 in, Depth (In.) 20 in, Overall Height (In.) 32 in, Overall Width (In.) 16 in, Overall Depth (In.) 20 in, Max. Hose Length (Ft.) 36 ft, Hose Dia. (In.) 2 3/8 in, 89 to 92 dBA dBA, Cord Length 5 ft, Cord Type 3 Prong Plug
Crank Handles, For Use With Grainger Item Number 13W881, Fits Brand DAYTON
Hose Extension Kit For 2-Stage Collectors
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 660, Min. Air Flow (CFM) 173.5, Operating Velocity Range (FPM) 6790 to 7970 +/-10 Percent, Static Pressure Range (In.) 4 to 8.5, 1 hp HP, 115/230 Voltage, 60 Hz, 1, 11 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) -, Height (In.) -, Width (In.) -, Depth (In.) -, Overall Height (In.) 72 in, Overall Width (In.) 15 in, Overall Depth (In.) 29 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 65 dBA, Drum Dia. (In.) –
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Dust Collector, Single Stage, Max. Flow (CFM) 650, Min. Air Flow (CFM) 650, Operating Velocity Range (FPM) 6,300, Static Pressure Range (In.) 6.50, 3/4 hp HP, 120 Voltage, 60 Hz, 1, 4.5 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 22, Height (In.) 61 in, Width (In.) 19 3/4 in, Depth (In.) 35 1/2 in, Overall Height (In.) 61 in, Overall Width (In.) 19 3/4 in, Overall Depth (In.) 35 1/2 in, Max. Hose Length (Ft.) 6.5, Hose Dia. (In.) 4 in, 88 dBA, Drum Dia. (In.) 15-3/4
Reviews
There are no reviews yet.