Dayton Floor Drill Press, Geared Head Drive, 3 hp, 460 V, 28 in Swing, 8 Speed
Original price was: $526.00.$98.99Current price is: $98.99.
Production Drill Presses, Floor Drill Press, Drive Type Geared Head, Swing 28 in, Spindle Taper 4MT, Motor HP 3 hp, Capacity Steel 1 1/2 in, Capacity Cast Iron 1 3/4 in, Drilling Capacity Wood Not Specified, Includes Chuck Guard with Limit Switch, Coolant System, Reversing Switch, Threading Mechanism, Power Down Feed Included Yes, Voltage 460, Amps AC 4.9, Number of Speeds 8, Chuck Size Not Included, Spindle Speed 105 to 1800 rpm, Spindle Travel 6 5/8 pulg., Base Size 29-3/4 in x 18-7/8 in
Dayton #467L03 Specifications
- Zoro #: G7135611
- Mfr #: 467L03
- Item: Floor Drill Press
- Drive Type: Geared Head
- Swing: 28 in
- Voltage: 460
- Motor HP: 3 hp
- Chuck Size: Not Included
- Number of Speeds: 8
- Capacity Steel: 1 1/2 in
- Spindle Speed: 105 to 1800 rpm
- Table Slot Size: 16 mm
- Phase: 3
- Overall Height: 86 1/2 in
- Spindle to Table: 28 1/2 in
- Max. Spindle To Base: 47 1/2 in
- Drilling Capacity Wood: Not Specified
- Power Down Feed Included: Yes
- Capacity Cast Iron: 1 3/4 in
- Corded/Cordless: Corded
- Includes: Chuck Guard with Limit Switch, Coolant System, Reversing Switch, Threading Mechanism
- Table Work Surface: 21 in x 21 in
- Hz: 60
- Tilting Angle: 90 Degrees
- Base Size: 29-3/4 in x 18-7/8 in
- Number of T-Slots: 3
- Column Dia.: 1 31/32 in
- Corded/Banded: Corded
- Overall Depth: 33 1/2 in
- Spindle Taper: 4MT
- Amps AC: 4.9
- Spindle Travel: 6 5/8 in
- Quill Dia.: 2 3/4 in
- Overall Width: 19 in
- Quill Diameter: 2 3/4 in
- Horsepower: 3 hp
- Drill Press Type: Floor Stand
- Number of Spindle Speeds: 8
- Number of Pieces: 5
- Reversible: Yes
- Table Width: 21 in
- Guard Included: Yes
- Spindle Speed Range: 105 RPM – 1,800 RPM
- Motor Voltage: 460V AC ; Three-Phase
- Coolant System: Yes
- Primary Material Application: Metal
- Maximum Spindle-to-Table Height: 28 1/2 in
- Table Slot: Yes
- Current: 4.9 A
- Maximum Overall Height: 86 1/2 in
- Spindle-to-Column Distance: 14 in
- Base Length: 18 7/8 in
- Drilling Capacity in Steel: 1 1/2 in
- Maximum Spindle-to-Base Height: 47 1/2 in
- Base Height: 29 3/4 in
- Table Tilt: 90 Degrees
- Speed Adjustment: Knob
- Maximum Spindle Speed: 1,800 RPM
- Column Diameter: 2 in
- Minimum Spindle Speed: 105 RPM
- Power Source: Corded
- Drill Press Application: Boring, Countersinking, Drilling, Reaming, Tapping
- Drill Spindle Travel: 6 in – 7 in
- Table Length: 21 in
- Table Shape: Square
- Speed Control: Fixed
- Speed Range: 105 to 1,800 RPM
- Nominal Voltage: 460V AC
- Country of Origin (subject to change): China
Related Products
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 12 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Angle Gauge No, Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Dust Collector, Two Stage Portable, Max. Flow (CFM) 600 cfm, Operating Velocity Range (FPM) 5,500 fpm, Static Pressure Range (In.) 1.51 to 7.1, 3/4 hp HP, 115/230V AC Voltage, 60 Hz Hz, Single, 7.5 A Amps AC, Hose Dia. (In.) 4 in, 79 dBA dBA, Drum Dia. (In.) 18 in to 19 1/2 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord, Drum Not Included
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 660, Min. Air Flow (CFM) 173.5, Operating Velocity Range (FPM) 6790 to 7970 +/-10 Percent, Static Pressure Range (In.) 4 to 8.5, 1 hp HP, 115/230 Voltage, 60 Hz, 1, 11 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) -, Height (In.) -, Width (In.) -, Depth (In.) -, Overall Height (In.) 72 in, Overall Width (In.) 15 in, Overall Depth (In.) 29 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 65 dBA, Drum Dia. (In.) –
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Crank Handles, For Use With Grainger Item Number 13W881, Fits Brand DAYTON
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Hose Extension Kit For 2-Stage Collectors
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Reviews
There are no reviews yet.