Dayton Floor Drill Press, Geared Head Drive, 3 to 4 hp, 240 V, 30 in Swing, 18 Speed
Original price was: $504.00.$98.99Current price is: $98.99.
Floor Drill Press, Primary Material Application Metal, Power Down Feed Included Yes, Drill Press Type Floor Stand, Drill Press Application Boring, Countersinking, Drilling, Reaming, Tapping, Speed Control Fixed, Speed Adjustment Knob, Swing 30 in, Spindle-to-Column Distance 15 in, Horsepower 3 to 4 hp, Voltage 240V AC, Spindle Taper 4MT, Number of Speeds 18, Chuck Style Keyed, Guard Included Yes, Coolant System Yes, Quill Diameter 3 1/2 in, Drilling Capacity in Steel 2 in
Dayton #53UH07 Specifications
- Zoro #: G9189041
- Mfr #: 53UH07
- Item: Floor Drill Press
- Drive Type: Geared Head
- Swing: 30 in
- Voltage: 240
- Motor HP: 3 to 4 hp
- Chuck Size: 5/8 in
- Number of Speeds: 18
- Capacity Steel: 2 in
- Spindle Speed: 54 to 2090 rpm
- Amps AC: 6.0
- Overall Depth: 40 in
- Table Slot Size: 1/2 in
- Spindle Travel: 9 in
- Drilling Capacity Wood: Not Specified
- Tilting Angle: Non-Tilting
- Base Size: 23-5/8 in x 20-1/2 in
- Phase: 3
- Overall Height: 97 in
- Spindle Taper: 4MT
- Corded/Cordless: Corded
- Includes: Chuck and Arbor, Safety Drill Guard, Halogen Work Light, Tool Ejector, Coolant System
- Spindle to Table: 31 1/2 in
- Capacity Cast Iron: 2 3/8 in
- Column Dia.: 8 in
- Overall Width: 24 in
- Corded/Banded: Corded
- Power Down Feed Included: Yes
- Quill Dia.: 3 1/2 in
- Number of T-Slots: 2
- Max. Spindle To Base: 51 in
- Table Work Surface: 23-19/32 in x 23-19/32 in
- Hz: 60
- Primary Material Application: Metal
- Chuck Style: Keyed
- Table Slot: Yes
- Number of Pieces: 7
- Table Shape: Square
- Number of Spindle Speeds: 18
- Maximum Overall Height: 97 in
- Chuck Capacity: 5/8 in
- Coolant System: Yes
- Speed Control: Fixed
- Base Length: 20 1/2 in
- Motor Voltage: 230V AC ; Three-Phase
- Current: 6 A
- Maximum Spindle-to-Table Height: 31 1/2 in
- Base Height: 23 5/8 in
- Drill Press Application: Boring, Countersinking, Drilling, Reaming, Tapping
- Maximum Spindle Speed: 2,090 RPM
- Spindle-to-Column Distance: 15 in
- Drill Spindle Travel: 7 in and Larger
- Horsepower: 3 to 4 hp
- Power Source: Corded
- Minimum Spindle Speed: 54 RPM
- Quill Diameter: 3 1/2 in
- Table Length: 23 in
- Speed Range: 54 to 2,090 RPM
- Drilling Capacity in Steel: 2 in
- Guard Included: Yes
- Column Diameter: 8 in
- Speed Adjustment: Knob
- Table Width: 23 in
- Maximum Spindle-to-Base Height: 51 in
- Spindle Speed Range: 54 RPM – 2,090 RPM
- Drill Press Type: Floor Stand
- Nominal Voltage: 230V AC
- Country of Origin (subject to change): China
Related Products
Metal Brake With Stand, Bending Length (In.) 36 in, Cutting Width (In.) 36 in, Capacity of Mild Steel (Gauge) 16, Cast Steel, Attachable Stand
Dust Collector, Single Stage, Max. Flow (CFM) 650, Min. Air Flow (CFM) 650, Operating Velocity Range (FPM) 6,300, Static Pressure Range (In.) 6.50, 3/4 hp HP, 120 Voltage, 60 Hz, 1, 4.5 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 22, Height (In.) 61 in, Width (In.) 19 3/4 in, Depth (In.) 35 1/2 in, Overall Height (In.) 61 in, Overall Width (In.) 19 3/4 in, Overall Depth (In.) 35 1/2 in, Max. Hose Length (Ft.) 6.5, Hose Dia. (In.) 4 in, 88 dBA, Drum Dia. (In.) 15-3/4
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 550, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.93 to 5.8, 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 7.5 Amps AC, Chip Capacity (Microns) 10, Drum Capacity (Gal.) 40, Hose Dia. (In.) 4 in, 79 dBA, Drum Dia. (In.) -, 10 micron Filter Bag, Includes (1) 10-micron Bag, 3-prong Power Cord, 5-ft Wire-reinforced PVC Inlet Hose and Clamps, Sheet Metal Back-port Pick-up Nozzle and 8-feet
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 12 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Angle Gauge No, Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Metal Forming Machine, Bending Length (In.) 52 in, Cutting Width (In.) 52 in, Rolls Min. 2 3/8 in, Capacity of Mild Steel (Gauge) 16, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 2 1/2 in, 4 in, 7 in, 9 in, 10 in, 15 in, Dual Edge Adjustable And Reversible, Made Of Tool Steel Blade, Cast Iron, Die Carbon Steel, Steel Male, Sizes 1 in , 1 1/2 in , 2 in , 2 1/2 in , 4 in , 7 in , 9 in , 10 in , And 15 in , Continuous Female V Shaped Forming
Hose Extension Kit For 2-Stage Collectors
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Dust Collector, Two Stage Portable, Max. Flow (CFM) 600 cfm, Operating Velocity Range (FPM) 5,500 fpm, Static Pressure Range (In.) 1.51 to 7.1, 3/4 hp HP, 115/230V AC Voltage, 60 Hz Hz, Single, 7.5 A Amps AC, Hose Dia. (In.) 4 in, 79 dBA dBA, Drum Dia. (In.) 18 in to 19 1/2 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord, Drum Not Included
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Reviews
There are no reviews yet.