Dayton Floor Drill Press, Geared Head Drive, 4 to 5 hp, 230 V, 32 in Swing, 16 Speed
Original price was: $474.00.$94.99Current price is: $94.99.
Production Drill Presses, Floor Drill Press, Drive Type Geared Head, Swing 32 in, Spindle Taper 4MT, Motor HP 4 to 5, Capacity Steel 2 in, Capacity Cast Iron 2 5/32 in, Drilling Capacity Wood Not Specified, Includes Chuck Guard with Limit Switch, Coolant System, Reversing Switch, Threading Mechanism, Power Down Feed Included Yes, Voltage 230, Amps AC 16.0, Number of Speeds 16, Chuck Size Not Included, Spindle Speed 54 to 2400 rpm, Spindle Travel 7 7/8 pulg., Base Size 35-3/4 in x 23-5/8 in
Dayton #467L04 Specifications
- Zoro #: G7135602
- Mfr #: 467L04
- Item: Floor Drill Press
- Drive Type: Geared Head
- Swing: 32 in
- Voltage: 230
- Motor HP: 4 to 5 hp
- Chuck Size: Not Included
- Number of Speeds: 16
- Capacity Steel: 2 in
- Spindle Speed: 54 to 2400 rpm
- Table Work Surface: 25-1/2 in x 25-1/2 in
- Quill Dia.: 3 29/64 in
- Amps AC: 16.0
- Max. Spindle To Base: 51 in
- Table Slot Size: 18 mm
- Number of T-Slots: 3
- Capacity Cast Iron: 2 5/32 in
- Phase: 3
- Includes: Chuck Guard with Limit Switch, Coolant System, Reversing Switch, Threading Mechanism
- Column Dia.: 7 7/8 in
- Spindle Taper: 4MT
- Corded/Banded: Corded
- Corded/Cordless: Corded
- Spindle Travel: 7 7/8 in
- Base Size: 35-3/4 in x 23-5/8 in
- Spindle to Table: 28 1/2 in
- Overall Width: 29 in
- Power Down Feed Included: Yes
- Overall Height: 92 1/2 in
- Overall Depth: 40 5/16 in
- Tilting Angle: 90 Degrees
- Hz: 60
- Drilling Capacity Wood: Not Specified
- Table Tilt: 90 Degrees
- Spindle Speed Range: 54 RPM – 2,400 RPM
- Motor Voltage: 230V AC ; Three-Phase
- Current: 16 A
- Base Height: 35 3/4 in
- Primary Material Application: Metal
- Spindle-to-Column Distance: 16 1/2 in
- Horsepower: 4 to 5 hp
- Maximum Spindle Speed: 2,400 RPM
- Coolant System: Yes
- Maximum Overall Height: 92 1/2 in
- Base Length: 23 5/8 in
- Number of Spindle Speeds: 16
- Speed Range: 54 to 2,400 RPM
- Maximum Spindle-to-Table Height: 28 1/2 in
- Table Length: 25 1/2 in
- Table Shape: Square
- Speed Control: Fixed
- Minimum Spindle Speed: 54 RPM
- Quill Diameter: 3 29/64 in
- Maximum Spindle-to-Base Height: 51 in
- Reversible: Yes
- Drilling Capacity in Steel: 2 in
- Table Slot: Yes
- Table Width: 25 1/2 in
- Drill Press Application: Boring, Countersinking, Drilling, Reaming, Tapping
- Drill Spindle Travel: 7 in and Larger
- Number of Pieces: 5
- Speed Adjustment: Knob
- Guard Included: Yes
- Drill Press Type: Floor Stand
- Power Source: Corded
- Column Diameter: 7 7/8 in
- Nominal Voltage: 230V AC
- Country of Origin (subject to change): China
Related Products
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Engraving Bit, For Use With 2LKU6 Electric Engraver, Engraving, Grooving and Slotting, Tool Length 1.5, Tool Weight 0.4 lb, Includes 2 Pack, Package Quantity 2
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 1.47 to 7.3, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16/8 Amps AC, Hose Dia. (In.) 5 in, 82 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes One 5-feet Wire-reinforced PVC Inlet Hose and Clamps, 5-micron Dust Collector Bag and 8-feet Power Cord(Drum Not Included)
Metal Brake With Stand, Bending Length (In.) 36 in, Cutting Width (In.) 36 in, Capacity of Mild Steel (Gauge) 16, Cast Steel, Attachable Stand
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 660, Min. Air Flow (CFM) 173.5, Operating Velocity Range (FPM) 6790 to 7970 +/-10 Percent, Static Pressure Range (In.) 4 to 8.5, 1 hp HP, 115/230 Voltage, 60 Hz, 1, 11 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) -, Height (In.) -, Width (In.) -, Depth (In.) -, Overall Height (In.) 72 in, Overall Width (In.) 15 in, Overall Depth (In.) 29 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 65 dBA, Drum Dia. (In.) –
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600, Operating Velocity Range (FPM) 9,450, Static Pressure Range (In.) 1.42 to 12, 5 hp HP, 230 Voltage, 60 Hz, 1, 22 Amps AC, Overall Height (In.) 117 45/64 in, Overall Width (In.) 32 1/2 in, Overall Depth (In.) 75 in, Hose Dia. (In.) 7 in, 83 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Reviews
There are no reviews yet.