Dayton Floor Drill Press, Geared Head Drive, 4 to 5 hp, 460 V, 32 in Swing, 16 Speed
Original price was: $580.00.$96.99Current price is: $96.99.
Production Drill Presses, Floor Drill Press, Drive Type Geared Head, Swing 32 in, Spindle Taper 4MT, Motor HP 4 to 5, Capacity Steel 2 in, Capacity Cast Iron 2 5/32 in, Drilling Capacity Wood Not Specified, Includes Chuck Guard with Limit Switch, Coolant System, Reversing Switch, Threading Mechanism, Power Down Feed Included Yes, Voltage 460, Amps AC 8.0, Number of Speeds 16, Chuck Size Not Included, Spindle Speed 54 to 2400 rpm, Spindle Travel 7 7/8 pulg., Base Size 35-3/4 in x 23-5/8 in
Dayton #467L05 Specifications
- Zoro #: G7119791
- Mfr #: 467L05
- Item: Floor Drill Press
- Drive Type: Geared Head
- Swing: 32 in
- Voltage: 460
- Motor HP: 4 to 5 hp
- Chuck Size: Not Included
- Number of Speeds: 16
- Capacity Steel: 2 in
- Spindle Speed: 54 to 2400 rpm
- Spindle Travel: 7 7/8 in
- Corded/Cordless: Corded
- Capacity Cast Iron: 2 5/32 in
- Amps AC: 8.0
- Number of T-Slots: 3
- Hz: 60
- Overall Height: 92 1/2 in
- Drilling Capacity Wood: Not Specified
- Base Size: 35-3/4 in x 23-5/8 in
- Table Work Surface: 25-1/2 in x 25-1/2 in
- Overall Depth: 40 5/16 in
- Overall Width: 29 in
- Tilting Angle: 90 Degrees
- Quill Dia.: 3 29/64 in
- Max. Spindle To Base: 51 in
- Phase: 3
- Power Down Feed Included: Yes
- Corded/Banded: Corded
- Table Slot Size: 18 mm
- Includes: Chuck Guard with Limit Switch, Coolant System, Reversing Switch, Threading Mechanism
- Spindle to Table: 28 1/2 in
- Spindle Taper: 4MT
- Column Dia.: 7 7/8 in
- Horsepower: 4 to 5 hp
- Drilling Capacity in Steel: 2 in
- Primary Material Application: Metal
- Speed Range: 54 to 2,400 RPM
- Drill Spindle Travel: 7 in and Larger
- Speed Adjustment: Knob
- Table Tilt: 90 Degrees
- Spindle Speed Range: 54 RPM – 2,400 RPM
- Table Slot: Yes
- Minimum Spindle Speed: 54 RPM
- Coolant System: Yes
- Maximum Spindle-to-Base Height: 51 in
- Column Diameter: 7 7/8 in
- Maximum Spindle Speed: 2,400 RPM
- Table Width: 25 1/2 in
- Number of Pieces: 5
- Base Height: 35 3/4 in
- Base Length: 23 5/8 in
- Drill Press Application: Boring, Countersinking, Drilling, Reaming, Tapping
- Motor Voltage: 460V AC ; Three-Phase
- Guard Included: Yes
- Number of Spindle Speeds: 16
- Power Source: Corded
- Quill Diameter: 3 29/64 in
- Current: 8 A
- Maximum Spindle-to-Table Height: 28 1/2 in
- Drill Press Type: Floor Stand
- Speed Control: Fixed
- Table Shape: Square
- Table Length: 25 1/2 in
- Maximum Overall Height: 92 1/2 in
- Reversible: Yes
- Spindle-to-Column Distance: 16 1/2 in
- Nominal Voltage: 460V AC
- Country of Origin (subject to change): China
Related Products
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 660, Min. Air Flow (CFM) 173.5, Operating Velocity Range (FPM) 6790 to 7970 +/-10 Percent, Static Pressure Range (In.) 4 to 8.5, 1 hp HP, 115/230 Voltage, 60 Hz, 1, 11 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) -, Height (In.) -, Width (In.) -, Depth (In.) -, Overall Height (In.) 72 in, Overall Width (In.) 15 in, Overall Depth (In.) 29 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 65 dBA, Drum Dia. (In.) –
Hose Extension Kit For 2-Stage Collectors
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 550, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.93 to 5.8, 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 7.5 Amps AC, Chip Capacity (Microns) 10, Drum Capacity (Gal.) 40, Hose Dia. (In.) 4 in, 79 dBA, Drum Dia. (In.) -, 10 micron Filter Bag, Includes (1) 10-micron Bag, 3-prong Power Cord, 5-ft Wire-reinforced PVC Inlet Hose and Clamps, Sheet Metal Back-port Pick-up Nozzle and 8-feet
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,900 cfm, Operating Velocity Range (FPM) 11,800 fpm, Static Pressure Range (In.) 2.01 to 13, 7 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 18 A Amps AC, Hose Dia. (In.) 7 in, 85 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly for Operation at 230V Only, Fiberglass Lid with Hose and Clamps, Power Control Box
Dust Collector, Two Stage Portable, Max. Flow (CFM) 600 cfm, Operating Velocity Range (FPM) 5,500 fpm, Static Pressure Range (In.) 1.51 to 7.1, 3/4 hp HP, 115/230V AC Voltage, 60 Hz Hz, Single, 7.5 A Amps AC, Hose Dia. (In.) 4 in, 79 dBA dBA, Drum Dia. (In.) 18 in to 19 1/2 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord, Drum Not Included
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Hose Extension Kit For 2-Stage Collectors
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Reviews
There are no reviews yet.