Dayton Lathe, 115/230 Volts, 2 HP, 60 Hz, 1 Phase
Original price was: $598.00.$93.99Current price is: $93.99.
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Dayton #53UH10 Specifications
- Zoro #: G9188868
- Mfr #: 53UH10
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 2
- Phase: Single
- Voltage: 115/230V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 12
- Horsepower: 2 hp
- Spindle Speed (RPM): 65 to 1800
- Gap Length (In.): 9
- Carriage Travel (In.): 31
- Distance Between Centers (In.): 36
- Spindle Bore (In.): 1-1/2
- Number of Spindle Speeds: 18
- Overall Height: 56 in
- Longitudinal Feed Rates: 0.002 to 0.055
- Bed Width (In.): 7-3/8
- Overall Width: 30 in
- Overall Length: 66 in
- Thread Range (In.): 4 to 56
- Swing In Gap (In.): 16-3/4
- Number of Threads (In.): 34
- Hz: 60
- Features: Charlock Spindle Seat, Hardened and Ground Bed Guide Ways, Stand
- Tailstock Taper: MT3
- Compound Travel (In.): 3-11/32
- Includes: (3) 160mm Jaw Chuck, (4) 200mm Jaw Chuck, 3MT Live Center, 4-Way Tool Post, Chuck and Tool Post Safety Guard, Follower Rest, Inch and Metric Gears for Threading, Splash Guard, Steady Rest, Work Light
- Cross Travel (In.): 6-3/8
- Swing Over Cross Slide (In.): 6-1/2
- Cross Feed Rates: 0.0005 to 0.015
- Thread Range (mm): 0.4 to 7
- Spindle Taper: MT-3
- Tailstock Travel (In.): 3-15/16
- Number of Threads (mm): 26
- Number of Inch Threads: 34
- Bed Width: 7 3/8 in
- Swing Over Bed: 12 in
- Max. Spindle Speed: 1,800 RPM
- Min. Metric Thread: 0.4 mm
- Max. Metric Thread: 7 mm
- Swing Over Cross Slide: 6 1/2 in
- Distance Between Centers: 36 in
- Gap Length: 9 in
- Max. Cross Feed: 0.0150 in
- Min. Spindle Speed: 65 RPM
- Max. Threads per Inch: 56
- Min. Cross Feed: 0.0005 in
- Spindle Bore: 1 1/2 in
- Number of Metric Threads: 26
- Application: Metal Turning
- Min. Threads per Inch: 4
- Swing In Gap: 16 3/4 in
- Country of Origin (subject to change): China
Related Products
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Dust Collector, Single Stage, Max. Flow (CFM) 650, Min. Air Flow (CFM) 650, Operating Velocity Range (FPM) 6,300, Static Pressure Range (In.) 6.50, 3/4 hp HP, 120 Voltage, 60 Hz, 1, 4.5 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 22, Height (In.) 61 in, Width (In.) 19 3/4 in, Depth (In.) 35 1/2 in, Overall Height (In.) 61 in, Overall Width (In.) 19 3/4 in, Overall Depth (In.) 35 1/2 in, Max. Hose Length (Ft.) 6.5, Hose Dia. (In.) 4 in, 88 dBA, Drum Dia. (In.) 15-3/4
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,900 cfm, Operating Velocity Range (FPM) 11,800 fpm, Static Pressure Range (In.) 2.01 to 13, 7 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 18 A Amps AC, Hose Dia. (In.) 7 in, 85 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly for Operation at 230V Only, Fiberglass Lid with Hose and Clamps, Power Control Box
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600, Operating Velocity Range (FPM) 9,450, Static Pressure Range (In.) 1.42 to 12, 5 hp HP, 230 Voltage, 60 Hz, 1, 22 Amps AC, Overall Height (In.) 117 45/64 in, Overall Width (In.) 32 1/2 in, Overall Depth (In.) 75 in, Hose Dia. (In.) 7 in, 83 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 550, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.93 to 5.8, 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 7.5 Amps AC, Chip Capacity (Microns) 10, Drum Capacity (Gal.) 40, Hose Dia. (In.) 4 in, 79 dBA, Drum Dia. (In.) -, 10 micron Filter Bag, Includes (1) 10-micron Bag, 3-prong Power Cord, 5-ft Wire-reinforced PVC Inlet Hose and Clamps, Sheet Metal Back-port Pick-up Nozzle and 8-feet
Hose Extension Kit For 2-Stage Collectors
Reviews
There are no reviews yet.