Dayton Lathe, 230 Volts, 10 HP, 60 Hz, 3 Phase
Original price was: $592.00.$96.99Current price is: $96.99.
Lathe, Distance Between Centers 80 in, Voltage 230, Horsepower 10, Min. Spindle Speed 30 RPM, Application Metal Turning, Overall Height 58 in, Overall Length 132 in, Overall Width 45 in, Max. Spindle Speed 1,920 RPM, Tailstock Taper MT5
Dayton #467K92 Specifications
- Zoro #: G7123879
- Mfr #: 467K92
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 10
- Phase: Three
- Voltage: 230V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 22
- Horsepower: 10 hp
- Overall Length: 132 in
- Spindle Speed (RPM): 30 to 1920
- Includes: (2) 5MT Dead Centers, (4) Jaw Chucks, Chuck and Tool Post Safety Guard, Digital Readout, DRO, Follower Rest, Inch and Metric Gears for Threading, Splash Guard, Stand, Steady Rest, Work Light
- Thread Range (mm): 0.2 to 14
- Longitudinal Feed Rates: 0.002 to 0.067
- Overall Height: 58 in
- Number of Threads (In.): 60
- Number of Spindle Speeds: 12
- Bed Width (In.): 13-19/32
- Distance Between Centers (In.): 80
- Spindle Bore (In.): 4-1/8
- Overall Width: 45 in
- Number of Threads (mm): 53
- Tailstock Taper: MT5
- Spindle Taper: MT-7
- Swing Over Cross Slide (In.): 14
- Coolant Tank Capacity: 5 gal.
- Tailstock Travel (In.): 4
- Cross Travel (In.): 12
- Carriage Travel (In.): 12-3/8
- Cross Feed Rates: 0.001 to 0.033
- Gap Length (In.): 10-1/2
- Swing In Gap (In.): 31
- Thread Range (In.): 2 to 112
- Features: Emergency Stop Push Button, Hardened and Ground Bed Guide Ways, Right and Left Rotation On The Bed Slide
- Compound Travel (In.): 1-1/4
- Hz: 60
- Min. Threads per Inch: 2
- Swing Over Bed: 22 in
- Swing Over Cross Slide: 14 in
- Number of Inch Threads: 60
- Max. Threads per Inch: 112
- Distance Between Centers: 80 in
- Spindle Bore: 4 1/8 in
- Application: Metal Turning
- Number of Metric Threads: 53
- Max. Cross Feed: 0.0330 in
- Min. Spindle Speed: 30 RPM
- Min. Metric Thread: 0.2 mm
- Swing In Gap: 31 in
- Min. Cross Feed: 0.0010 in
- Bed Width: 13 19/32 in
- Max. Metric Thread: 14 mm
- Gap Length: 10 1/2 in
- Max. Spindle Speed: 1,920 RPM
- Country of Origin (subject to change): China
Related Products
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Hose Extension Kit For 2-Stage Collectors
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Crank Handles, For Use With Grainger Item Number 13W881, Fits Brand DAYTON
Hose Extension Kit For 2-Stage Collectors
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600, Operating Velocity Range (FPM) 9,450, Static Pressure Range (In.) 1.42 to 12, 5 hp HP, 230 Voltage, 60 Hz, 1, 22 Amps AC, Overall Height (In.) 117 45/64 in, Overall Width (In.) 32 1/2 in, Overall Depth (In.) 75 in, Hose Dia. (In.) 7 in, 83 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Reviews
There are no reviews yet.