Dayton Lathe, 230 Volts, 2 1/4 HP, 60 Hz, 3 Phase
Original price was: $483.00.$91.99Current price is: $91.99.
Lathe, Distance Between Centers 40 in, Voltage 230, Horsepower 2 1/4, Min. Spindle Speed 45 RPM, Application Metal Turning, Overall Height 58 in, Overall Length 76 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Dayton #467K88 Specifications
- Zoro #: G7133012
- Mfr #: 467K88
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 2/1/04
- Phase: Three
- Voltage: 230V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 14
- Horsepower: 2 1/4 hp
- Bed Width (In.): 8
- Overall Width: 30 in
- Thread Range (mm): 0.45 to 7.5
- Swing In Gap (In.): 20-1/4
- Gap Length (In.): 9-1/2
- Spindle Bore (In.): 2
- Cross Feed Rates: 0.0005 to 0.0118
- Swing Over Cross Slide (In.): 8-1/2
- Spindle Taper: MT-6
- Number of Threads (mm): 22
- Spindle Speed (RPM): 45 to 1800
- Compound Travel (In.): 3-3/4
- Distance Between Centers (In.): 40
- Number of Threads (In.): 40
- Features: 10 Amp., Emergency Stop Push Button, Hardened and Ground Bed Guide Ways
- Overall Height: 58 in
- Thread Range (In.): 4 to 112
- Includes: (2) 3MT Dead Centers, (4) Jaw Chucks, Chuck and Tool Post Safety Guard, Digital Readout, DRO, Follower Rest, Inch and Metric Gears for Threading, Splash Guard, Steady Rest, Work Light
- Longitudinal Feed Rates: 0.0012 to 0.0294
- Number of Spindle Speeds: 8
- Tailstock Travel (In.): 6
- Cross Travel (In.): 6-1/2
- Coolant Tank Capacity: 2-39/64 gal.
- Carriage Travel (In.): 36-3/8
- Tailstock Taper: MT3
- Hz: 60
- Overall Length: 76 in
- Number of Metric Threads: 22
- Number of Inch Threads: 40
- Swing Over Bed: 14 in
- Swing Over Cross Slide: 8 1/2 in
- Min. Metric Thread: 0.45 mm
- Bed Width: 8 in
- Swing In Gap: 20 1/4 in
- Max. Metric Thread: 7.5 mm
- Min. Threads per Inch: 4
- Max. Threads per Inch: 112
- Min. Spindle Speed: 45 RPM
- Max. Spindle Speed: 1,800 RPM
- Spindle Bore: 2 in
- Distance Between Centers: 40 in
- Gap Length: 9 1/2 in
- Max. Cross Feed: 0.0118 in
- Min. Cross Feed: 0.0005 in
- Application: Metal Turning
- Country of Origin (subject to change): China
Related Products
Dust Collector, Stationary, Max. Flow (CFM) 472 cfm, Operating Velocity Range (FPM) 2,300 fpm, Static Pressure Range (In.) 3.5, 1 1/2 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 10 A Amps AC, Height (In.) 32 in, Width (In.) 16 in, Depth (In.) 20 in, Overall Height (In.) 32 in, Overall Width (In.) 16 in, Overall Depth (In.) 20 in, Max. Hose Length (Ft.) 36 ft, Hose Dia. (In.) 2 3/8 in, 89 to 92 dBA dBA, Cord Length 5 ft, Cord Type 3 Prong Plug
Engraving Bit, For Use With 2LKU6 Electric Engraver, Engraving, Grooving and Slotting, Tool Length 1.5, Tool Weight 0.4 lb, Includes 2 Pack, Package Quantity 2
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Metal Brake With Stand, Bending Length (In.) 36 in, Cutting Width (In.) 36 in, Capacity of Mild Steel (Gauge) 16, Cast Steel, Attachable Stand
Hose Extension Kit For 2-Stage Collectors
Dust Collector, Two Stage Portable, 3-Phase, Max. Flow (CFM) 1,310 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.64 to 9, 2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 5.2 A Amps AC, Hose Dia. (In.) 6 in, 83 dBA dBA, Drum Dia. (In.) 22 a 24, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 1.47 to 7.3, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16/8 Amps AC, Hose Dia. (In.) 5 in, 82 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes One 5-feet Wire-reinforced PVC Inlet Hose and Clamps, 5-micron Dust Collector Bag and 8-feet Power Cord(Drum Not Included)
Reviews
There are no reviews yet.