Dayton Lathe, 230 Volts, 2 HP, 60 Hz, 3 Phase
Original price was: $515.00.$96.99Current price is: $96.99.
Lathe, Distance Between Centers 40 in, Voltage 230, Horsepower 2, Min. Spindle Speed 70 RPM, Application Metal Turning, Overall Height 58 in, Overall Length 76 in, Overall Width 30 in, Max. Spindle Speed 2,000 RPM, Tailstock Taper MT3
Dayton #467K87 Specifications
- Zoro #: G7136241
- Mfr #: 467K87
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 2
- Phase: Three
- Voltage: 230V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 13
- Horsepower: 2 hp
- Overall Height: 58 in
- Includes: (2) 3MT Dead Centers, (4) Jaw Chucks, Chuck and Tool Post Safety Guard, Digital Readout, DRO, Follower Rest, Inch and Metric Gears for Threading, Splash Guard, Steady Rest, Work Light
- Compound Travel (In.): 3-3/4
- Gap Length (In.): 8
- Swing In Gap (In.): 18-3/4
- Cross Travel (In.): 7
- Longitudinal Feed Rates: 0.003 to 0.023
- Thread Range (In.): 4 to 56
- Hz: 60
- Number of Threads (In.): 34
- Features: Emergency Stop Push Button, Hardened and Ground Bed Guide Ways
- Overall Length: 76 in
- Spindle Bore (In.): 2
- Spindle Speed (RPM): 70 to 2000
- Cross Feed Rates: 0.0005 to 0.015
- Spindle Taper: MT-5
- Number of Spindle Speeds: 8
- Carriage Travel (In.): 36-3/8
- Overall Width: 30 in
- Distance Between Centers (In.): 40
- Tailstock Taper: MT3
- Bed Width (In.): 7-3/8
- Thread Range (mm): 0.4 to 7
- Number of Threads (mm): 26
- Tailstock Travel (In.): 5
- Swing Over Cross Slide (In.): 6-1/2
- Coolant Tank Capacity: 2 gal.
- Application: Metal Turning
- Swing Over Cross Slide: 6 1/2 in
- Number of Metric Threads: 26
- Swing In Gap: 18 3/4 in
- Max. Threads per Inch: 56
- Max. Spindle Speed: 2,000 RPM
- Spindle Bore: 2 in
- Distance Between Centers: 40 in
- Min. Metric Thread: 0.4 mm
- Max. Cross Feed: 0.0150 in
- Number of Inch Threads: 34
- Min. Spindle Speed: 70 RPM
- Swing Over Bed: 13 in
- Min. Cross Feed: 0.0005 in
- Min. Threads per Inch: 4
- Bed Width: 7 3/8 in
- Max. Metric Thread: 7 mm
- Gap Length: 8 in
- Country of Origin (subject to change): China
Related Products
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 550, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.93 to 5.8, 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 7.5 Amps AC, Chip Capacity (Microns) 10, Drum Capacity (Gal.) 40, Hose Dia. (In.) 4 in, 79 dBA, Drum Dia. (In.) -, 10 micron Filter Bag, Includes (1) 10-micron Bag, 3-prong Power Cord, 5-ft Wire-reinforced PVC Inlet Hose and Clamps, Sheet Metal Back-port Pick-up Nozzle and 8-feet
Dust Collector, Two Stage Portable, Max. Flow (CFM) 600 cfm, Operating Velocity Range (FPM) 5,500 fpm, Static Pressure Range (In.) 1.51 to 7.1, 3/4 hp HP, 115/230V AC Voltage, 60 Hz Hz, Single, 7.5 A Amps AC, Hose Dia. (In.) 4 in, 79 dBA dBA, Drum Dia. (In.) 18 in to 19 1/2 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord, Drum Not Included
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Metal Brake With Stand, Bending Length (In.) 36 in, Cutting Width (In.) 36 in, Capacity of Mild Steel (Gauge) 16, Cast Steel, Attachable Stand
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Dust Collector, Two Stage Portable, 3-Phase, Max. Flow (CFM) 1,310 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.64 to 9, 2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 5.2 A Amps AC, Hose Dia. (In.) 6 in, 83 dBA dBA, Drum Dia. (In.) 22 a 24, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Crank Handles, For Use With Grainger Item Number 13W881, Fits Brand DAYTON
Dust Collector, Single Stage, Max. Flow (CFM) 650, Min. Air Flow (CFM) 650, Operating Velocity Range (FPM) 6,300, Static Pressure Range (In.) 6.50, 3/4 hp HP, 120 Voltage, 60 Hz, 1, 4.5 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 22, Height (In.) 61 in, Width (In.) 19 3/4 in, Depth (In.) 35 1/2 in, Overall Height (In.) 61 in, Overall Width (In.) 19 3/4 in, Overall Depth (In.) 35 1/2 in, Max. Hose Length (Ft.) 6.5, Hose Dia. (In.) 4 in, 88 dBA, Drum Dia. (In.) 15-3/4
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Reviews
There are no reviews yet.