Dayton Lathe, 230 Volts, 7 1/2 HP, 60 Hz, 3 Phase
Original price was: $489.00.$92.99Current price is: $92.99.
Lathe, Distance Between Centers 80 in, Voltage 230, Horsepower 7 1/2, Min. Spindle Speed 30 RPM, Application Metal Turning, Overall Height 63 in, Overall Length 128 in, Overall Width 49 in, Max. Spindle Speed 2,400 RPM, Tailstock Taper MT4
Dayton #467K91 Specifications
- Zoro #: G7121182
- Mfr #: 467K91
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 7-1/2
- Phase: Three
- Voltage: 230V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 18
- Horsepower: 7 1/2 hp
- Thread Range (mm): 0.1 to 14
- Number of Threads (In.): 40
- Overall Height: 63 in
- Overall Width: 49 in
- Cross Feed Rates: 0.001 to 0.033
- Includes: (2) 5MT Dead Centers, (4) Jaw Chucks, Chuck and Tool Post Safety Guard, Digital Readout, DRO, Follower Rest, Inch and Metric Gears for Threading, Splash Guard, Stand, Steady Rest, Work Light
- Compound Travel (In.): 1-1/4
- Spindle Speed (RPM): 30 to 2400
- Longitudinal Feed Rates: 0.002 to 0.067
- Distance Between Centers (In.): 80
- Hz: 60
- Spindle Taper: MT-6
- Thread Range (In.): 2 to 112
- Tailstock Taper: MT4
- Tailstock Travel (In.): 5
- Features: Emergency Stop Push Button, Hardened and Ground Bed Guide Ways, Right and Left Rotation On The Bed Slide
- Cross Travel (In.): 28
- Number of Spindle Speeds: 12
- Carriage Travel (In.): 11
- Gap Length (In.): 9-1/2
- Number of Threads (mm): 53
- Spindle Bore (In.): 3-1/8
- Coolant Tank Capacity: 5 gal.
- Bed Width (In.): 11-3/4
- Swing Over Cross Slide (In.): 10-1/2
- Overall Length: 128 in
- Swing In Gap (In.): 18-3/4
- Min. Cross Feed: 0.0010 in
- Number of Inch Threads: 40
- Min. Threads per Inch: 2
- Max. Metric Thread: 14 mm
- Application: Metal Turning
- Min. Metric Thread: 0.10 mm
- Max. Threads per Inch: 112
- Number of Metric Threads: 53
- Swing Over Cross Slide: 10 1/2 in
- Gap Length: 9 1/2 in
- Max. Spindle Speed: 2,400 RPM
- Swing In Gap: 27 in
- Spindle Bore: 3 1/8 in
- Max. Cross Feed: 0.0330 in
- Bed Width: 11 3/4 in
- Min. Spindle Speed: 30 RPM
- Distance Between Centers: 80 in
- Swing Over Bed: 18 in
- Country of Origin (subject to change): China
Related Products
Hose Extension Kit For 2-Stage Collectors
Metal Brake With Stand, Bending Length (In.) 36 in, Cutting Width (In.) 36 in, Capacity of Mild Steel (Gauge) 16, Cast Steel, Attachable Stand
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Dust Collector, Stationary, Max. Flow (CFM) 472 cfm, Operating Velocity Range (FPM) 2,300 fpm, Static Pressure Range (In.) 3.5, 1 1/2 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 10 A Amps AC, Height (In.) 32 in, Width (In.) 16 in, Depth (In.) 20 in, Overall Height (In.) 32 in, Overall Width (In.) 16 in, Overall Depth (In.) 20 in, Max. Hose Length (Ft.) 36 ft, Hose Dia. (In.) 2 3/8 in, 89 to 92 dBA dBA, Cord Length 5 ft, Cord Type 3 Prong Plug
Dust Collector, Single Stage, Max. Flow (CFM) 650, Min. Air Flow (CFM) 650, Operating Velocity Range (FPM) 6,300, Static Pressure Range (In.) 6.50, 3/4 hp HP, 120 Voltage, 60 Hz, 1, 4.5 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 22, Height (In.) 61 in, Width (In.) 19 3/4 in, Depth (In.) 35 1/2 in, Overall Height (In.) 61 in, Overall Width (In.) 19 3/4 in, Overall Depth (In.) 35 1/2 in, Max. Hose Length (Ft.) 6.5, Hose Dia. (In.) 4 in, 88 dBA, Drum Dia. (In.) 15-3/4
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600, Operating Velocity Range (FPM) 9,450, Static Pressure Range (In.) 1.42 to 12, 5 hp HP, 230 Voltage, 60 Hz, 1, 22 Amps AC, Overall Height (In.) 117 45/64 in, Overall Width (In.) 32 1/2 in, Overall Depth (In.) 75 in, Hose Dia. (In.) 7 in, 83 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Reviews
There are no reviews yet.