Dayton Lathe, 460 Volts, 5 HP, 60 Hz, 3 Phase
Original price was: $541.00.$95.99Current price is: $95.99.
Lathe, Distance Between Centers 25 in, Voltage 460, Horsepower 5, Min. Spindle Speed 35 RPM, Application Metal Turning, Overall Height 67 1/2 in, Overall Length 77 in, Overall Width 56 1/2 in, Max. Spindle Speed 4,200 RPM, Tailstock Taper MT3
Dayton #467L75 Specifications
- Zoro #: G7137888
- Mfr #: 467L75
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 5
- Phase: Three
- Voltage: 460V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 13
- Horsepower: 5 hp
- Tailstock Taper: MT3
- Overall Length: 77 in
- Coolant Tank Capacity: 10 gal.
- Hz: 60
- Bed Width (In.): 8
- Spindle Bore (In.): 1-1/2
- Spindle Speed (RPM): 35 to 4200
- Tailstock Travel (In.): 4-3/4
- Includes: (3) 6 in Jaw Chucks, Coolant System, LED Work Lamp, Lubricating System
- Number of Spindle Speeds: Variable
- Swing Over Cross Slide (In.): 5-1/2″
- Number of Threads (mm): 0
- Number of Threads (In.): 0
- Features: Siemens 808D Controller with Relative Encoder
- Cross Travel (In.): 7-1/4
- Overall Height: 67 1/2 in
- Overall Width: 56 1/2 in
- Distance Between Centers (In.): 25
- Spindle Taper: 1:20
- Min. Spindle Speed: 35 RPM
- Distance Between Centers: 25 in
- Application: Metal Turning
- Spindle Bore: 1 1/2 in
- Number of Metric Threads: 0
- Max. Spindle Speed: 4,200 RPM
- Swing Over Cross Slide: 6 in
- Number of Inch Threads: 0
- Bed Width: 8 in
- Swing Over Bed: 13 in
- Country of Origin (subject to change): China
Related Products
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Dust Collector, Two Stage Portable, 3-Phase, Max. Flow (CFM) 1,310 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.64 to 9, 2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 5.2 A Amps AC, Hose Dia. (In.) 6 in, 83 dBA dBA, Drum Dia. (In.) 22 a 24, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 550, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.93 to 5.8, 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 7.5 Amps AC, Chip Capacity (Microns) 10, Drum Capacity (Gal.) 40, Hose Dia. (In.) 4 in, 79 dBA, Drum Dia. (In.) -, 10 micron Filter Bag, Includes (1) 10-micron Bag, 3-prong Power Cord, 5-ft Wire-reinforced PVC Inlet Hose and Clamps, Sheet Metal Back-port Pick-up Nozzle and 8-feet
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 12 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Angle Gauge No, Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Lathe, Distance Between Centers 36 in, Voltage 115/230V AC, Horsepower 2 hp, Min. Spindle Speed 65 RPM, Application Metal Turning, Overall Height 56 in, Overall Length 66 in, Overall Width 30 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3
Dust Collector, Single Stage, Max. Flow (CFM) 1,490, Min. Air Flow (CFM) 1,490, Operating Velocity Range (FPM) 14,000, Static Pressure Range (In.) 11.50, 2 hp HP, 120/240 Voltage, 60 Hz, 1, 12.6 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 40, Height (In.) 33 1/2 in, Width (In.) 27 1/2 in, Depth (In.) 36 in, Overall Height (In.) 76 3/4 in, Overall Width (In.) 27 1/2 in, Overall Depth (In.) 36 1/2 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 80 dBA, Drum Dia. (In.) 19-3/4
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Reviews
There are no reviews yet.