Dayton Mill/Drill Machine, 120/240V, 1720rpm, 60Hz
Original price was: $427.00.$94.99Current price is: $94.99.
Mill Drill Machine, Phase 3, Swing 30 in
Dayton #444F35 Specifications
- Zoro #: G3784720
- Mfr #: 444F35
- Swing: 30 in
- Voltage: 230/460V
- RPM: 1720
- Item: Mill Drill Machine
- Drilling Capacity Steel: 3/4 in
- Spindle Speed: 70 to 3800 rpm
- Face Milling Capacity: 3 in
- Motor HP: 3
- Phase: 3
- Longitudinal Travel: 27 1/2 in
- Cross Travel: 10 in
- Chuck Size: Not Included
- Amps: 8.0/4.0
- End Milling Capacity: 3 in
- Table Work Surface: 9 in x 49 in
- Motor Type: Brushless DC
- Features: Variable Speed Drive, Heavy Duty Spline Motor Drive System, Vent Air Cooling System for Variable Speed Drive, Heavy Duty Spindle Brake, Forward, Reverse Drum Switch, Dual Taper Roller Spindle Bearing, Draw Bar, Flame Hardened to Rc 50-54, Ground and Hand Scraped Ways One Shot Lubrication System
- Corded/Cordless: Corded
- Spindle to Table: 17-1/4″
- Spindle Travel: 5 in
- Includes: Fagor CNC 8055FL Conversion Set-Up, 3-Axis DRO, X and Y Axis Power Feed, Heavy Duty Spindle Brake, Forward/Reverse Drum Switch, Heavy Duty Extended Travel Ram
- Hz: 60
- Corded/Banded: Corded
- Spindle Taper: R8
- T-Slots: 5/8″
- Graduations: 0.0010 in
- Quill Dia.: 3 3/8 in
- Head: Belt Drive
- Operation: Power
- Spindle: R8
- Frequency: 60Hz
- Power Source: Corded
- Speed: 1720 rpm
- T-Slot Width: 5/8 in
- Motor Horsepower: 3
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,900 cfm, Operating Velocity Range (FPM) 11,800 fpm, Static Pressure Range (In.) 2.01 to 13, 7 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 18 A Amps AC, Hose Dia. (In.) 7 in, 85 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly for Operation at 230V Only, Fiberglass Lid with Hose and Clamps, Power Control Box
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Dust Collector, Single Stage, Max. Flow (CFM) 1,490, Min. Air Flow (CFM) 1,490, Operating Velocity Range (FPM) 14,000, Static Pressure Range (In.) 11.50, 2 hp HP, 120/240 Voltage, 60 Hz, 1, 12.6 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 40, Height (In.) 33 1/2 in, Width (In.) 27 1/2 in, Depth (In.) 36 in, Overall Height (In.) 76 3/4 in, Overall Width (In.) 27 1/2 in, Overall Depth (In.) 36 1/2 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 80 dBA, Drum Dia. (In.) 19-3/4
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 12 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Angle Gauge No, Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Metal Brake With Stand, Bending Length (In.) 36 in, Cutting Width (In.) 36 in, Capacity of Mild Steel (Gauge) 16, Cast Steel, Attachable Stand
Reviews
There are no reviews yet.