Dayton Mill/Drill Machine, 60 Hz, 15.4A
Original price was: $453.00.$91.99Current price is: $91.99.
Mill Drill Machine, Phase 3, Swing 12 in
Dayton #467L71 Specifications
- Zoro #: G7123090
- Mfr #: 467L71
- Swing: 12 in
- Voltage: 460V
- RPM: 50 to 10,000
- Item: Mill Drill Machine
- Drilling Capacity Steel: 1 in
- Spindle Speed: 50 to 10,000 rpm
- Face Milling Capacity: 2 1/2 in
- Motor HP: 3
- Phase: 3
- Longitudinal Travel: 15 3/4 in
- Cross Travel: 9 in
- Chuck Size: Not Included
- Amps: 15.4
- End Milling Capacity: 1 1/4 in
- Hz: 60
- Spindle Travel: 15 3/4 in
- Graduations: 0.0010 in
- Table Work Surface: 10 in x 31 in
- Spindle to Table: 18-5/8″
- Includes: Cover
- Motor Type: TEFC
- Features: Siemens 808D Control System, Door Equipped with A Safety Switch, Central Lubrication, Cooling System, Double Line 24V Electric Hand Wheel
- Spindle Taper: BT30
- Head: Belt Drive
- Operation: Power
- Corded/Cordless: Corded
- Spindle: BT30
- Table Surface Height: 37 in
- T-Slots: 5/8″
- Frequency: 60Hz
- Speed: 50 to 10,000 rpm
- T-Slot Width: 5/8 in
- Power Source: Corded
- Motor Horsepower: 3
- Country of Origin (subject to change): China
Related Products
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,900 cfm, Operating Velocity Range (FPM) 11,800 fpm, Static Pressure Range (In.) 2.01 to 13, 7 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 18 A Amps AC, Hose Dia. (In.) 7 in, 85 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly for Operation at 230V Only, Fiberglass Lid with Hose and Clamps, Power Control Box
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 550, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.93 to 5.8, 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 7.5 Amps AC, Chip Capacity (Microns) 10, Drum Capacity (Gal.) 40, Hose Dia. (In.) 4 in, 79 dBA, Drum Dia. (In.) -, 10 micron Filter Bag, Includes (1) 10-micron Bag, 3-prong Power Cord, 5-ft Wire-reinforced PVC Inlet Hose and Clamps, Sheet Metal Back-port Pick-up Nozzle and 8-feet
Filter Bag, Oversized, Overall Height (In.) 72, Overall Dia. (In.) 24, For Use With 15.5 cu. ft., 1-1/2 HP and Larger Two-Stage Collectors , Includes Micron Filter Bag and Belt Drum
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Dust Collector, Single Stage, Max. Flow (CFM) 1,490, Min. Air Flow (CFM) 1,490, Operating Velocity Range (FPM) 14,000, Static Pressure Range (In.) 11.50, 2 hp HP, 120/240 Voltage, 60 Hz, 1, 12.6 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 40, Height (In.) 33 1/2 in, Width (In.) 27 1/2 in, Depth (In.) 36 in, Overall Height (In.) 76 3/4 in, Overall Width (In.) 27 1/2 in, Overall Depth (In.) 36 1/2 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 80 dBA, Drum Dia. (In.) 19-3/4
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 660, Min. Air Flow (CFM) 173.5, Operating Velocity Range (FPM) 6790 to 7970 +/-10 Percent, Static Pressure Range (In.) 4 to 8.5, 1 hp HP, 115/230 Voltage, 60 Hz, 1, 11 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) -, Height (In.) -, Width (In.) -, Depth (In.) -, Overall Height (In.) 72 in, Overall Width (In.) 15 in, Overall Depth (In.) 29 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 65 dBA, Drum Dia. (In.) –
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Hose Extension Kit For 2-Stage Collectors
Reviews
There are no reviews yet.