Dayton Radial Floor Drill Press, Belt Drive, 1/2 hp, 120 V, 33 in Swing, 5 Speed
Original price was: $526.00.$91.99Current price is: $91.99.
General Purpose Drill Presses, Radial Floor Drill Press, Drive Type Belt, Swing 33 in, Spindle Taper 2MT, Motor HP 1/2 hp, Capacity Steel 3/8 in, Capacity Cast Iron 5/8 in, Drilling Capacity Wood Not Specified, Includes Arbor, Chuck and Key, Power Down Feed Included No, Voltage 120, Amps AC 7.0, Number of Speeds 5, Chuck Size 5/8 in, Spindle Speed 550 to 3300 rpm, Spindle Travel 3 5/32 in, Base Size 14 in x 23-1/2 in, Table Work Surface 10-3/8 in x 10-3/8 in, Hz 60, Phase 1, Number of T-Slots 0
Dayton #40PM17 Specifications
- Zoro #: G2096440
- Mfr #: 40PM17
- Promotion Restriction: Not eligible for promotion
- Drill Press Product Grouping: General Purpose Drill Presses
- Item: Radial Floor Drill Press
- Drive Type: Belt
- Swing: 33 in
- Voltage: 120
- Motor HP: 1/2 hp
- Chuck Size: 5/8 in
- Number of Speeds: 5
- Capacity Steel: 3/8 in
- Spindle Speed: 550 to 3300 rpm
- Phase: 1
- Spindle Taper: 2MT
- Includes: Arbor, Chuck and Key
- Corded/Banded: Corded
- Capacity Cast Iron: 5/8 in
- Spindle Travel: 3 5/32 in
- Overall Depth: 33 in
- Power Down Feed Included: No
- Quill Dia.: 1 55/64 in
- Base Size: 14 in x 23-1/2 in
- Amps AC: 7.0
- Table Work Surface: 10-3/8 in x 10-3/8 in
- Hz: 60
- Overall Height: 65 in
- Max. Spindle To Base: 50 in
- Number of T-Slots: 0
- Table Slot Size: 1/2 in
- Column Dia.: 2 3/4 in
- Overall Width: 14 in
- Corded/Cordless: Corded
- Drilling Capacity Wood: Not Specified
- Tilting Angle: 45 Degrees
- Spindle to Table: 30 in
- Table Width: 10 3/8 in
- Speed Range: 550 to 3,300 RPM
- Base Length: 23 1/2 in
- Table Slot: Yes
- Spindle-to-Column Distance: 16 1/2 in
- Column Diameter: 2 3/4 in
- Current: 5.5 A
- Radial Arm: Yes
- Table Length: 10 3/8 in
- Base Height: 14 in
- Spindle Speed Range: 550 RPM – 3,300 RPM
- Chuck Style: Keyed
- Maximum Overall Height: 65 in
- Drilling Capacity in Steel: 3/8 in
- Table Tilt: 45 Degrees
- Motor Voltage: 115V AC ; Single-Phase
- Nominal Voltage: 115V AC
- Speed Adjustment: Step Pulley
- Drill Press Type: Floor Stand
- Horsepower: 1/2 hp
- Drill Press Application: Countersinking, Drilling, Reaming
- Radial Arm Length: 33 in
- Primary Material Application: Metal, Wood
- Number of Spindle Speeds: 5
- Maximum Spindle-to-Table Height: 30 in
- Quill Diameter: 1 55/64 in
- Power Source: Corded
- Table Shape: Square
- Guard Included: No
- Maximum Spindle Speed: 3,300 RPM
- Chuck Capacity: 5/8 in
- Maximum Spindle-to-Base Height: 50 in
- Minimum Spindle Speed: 550 RPM
- Speed Control: Fixed
- Coolant System: No
- Number of Pieces: 4
- Country of Origin (subject to change): China
Related Products
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Dust Collector, Single Stage, Max. Flow (CFM) 650, Min. Air Flow (CFM) 650, Operating Velocity Range (FPM) 6,300, Static Pressure Range (In.) 6.50, 3/4 hp HP, 120 Voltage, 60 Hz, 1, 4.5 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 22, Height (In.) 61 in, Width (In.) 19 3/4 in, Depth (In.) 35 1/2 in, Overall Height (In.) 61 in, Overall Width (In.) 19 3/4 in, Overall Depth (In.) 35 1/2 in, Max. Hose Length (Ft.) 6.5, Hose Dia. (In.) 4 in, 88 dBA, Drum Dia. (In.) 15-3/4
Hose Extension Kit For 2-Stage Collectors
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Dust Collector, Two Stage Portable, 3-Phase, Max. Flow (CFM) 1,310 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.64 to 9, 2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 5.2 A Amps AC, Hose Dia. (In.) 6 in, 83 dBA dBA, Drum Dia. (In.) 22 a 24, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,600 cfm, Operating Velocity Range (FPM) 9,450 fpm, Static Pressure Range (In.) 1.76 to 12, 5 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 14.5 A Amps AC, Hose Dia. (In.) 7 in, 83 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly, Fiberglass Lid with Hose and Clamps, Power Control Box, CFM at Max. S.P. 489.21 cfm
Combination Shear, Bending Length (In.) 30.25 in, Cutting Width (In.) 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in , Continuous Female V Shaped Forming
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 1.47 to 7.3, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16/8 Amps AC, Hose Dia. (In.) 5 in, 82 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes One 5-feet Wire-reinforced PVC Inlet Hose and Clamps, 5-micron Dust Collector Bag and 8-feet Power Cord(Drum Not Included)
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Hose Extension Kit For 2-Stage Collectors
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Reviews
There are no reviews yet.