Dayton Shaft Arbor, 3/8-24rh
Original price was: $7.70.$5.39Current price is: $5.39.
Shaft Arbor, Small, 3/8-24RH Thread, Counter Clockwise Rotation, Max. Wheel Width (In.) 1/2 in, Overall Length (In.) 2 in, Thread Length (In.) 1 1/8 in, Washer O.D. (In.) 1 1/4 in, Fits Shaft Dia. (In.) 3/8 in, Socket, Locks Arbors Securely to Shaft Setscrew Type, Mounting Various Buffing and Finishing Wheels on Electric Motors, Includes Flanged Washers, Hex Nut
Dayton #3ZN06 Specifications
- Zoro #: G3309661
- Mfr #: 3ZN06
- Type: Small
- Max. Wheel Width (In.): 1/2 in
- Overall Length (In.): 2 in
- Fits Shaft Dia. (In.): 3/8 in
- For Use With: Smaller Fractional Horsepower Motors
- Thread Length (In.): 1 1/8 in
- Includes: Flanged Washers, Hex Nut
- Application: Mounting Various Buffing and Finishing Wheels on Electric Motors
- Thread: 3/8-24RH
- Item: Shaft Arbor
- Washer O.D. (In.): 1 1/4 in
- Setscrew Type: Socket, Locks Arbors Securely to Shaft
- Rotation: Counter Clockwise
- Overall Length: 2 in
- Maximum Wheel Width: 1/2 in
- Shaft Rotation: Counter Clockwise
- Washer Outside Diameter: 1 1/4 in
- Thread Size: 3/8″-24 RH
- Fits Shaft Diameter: 3/8 in
- Thread Length: 1 1/8 in
- Country of Origin (subject to change): China
Related Products
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Hose Extension Kit, Hose Dia. (In.) 4, Length (Ft.) 5, For Use With Single-Stage and Two-Stage Dust Collectors, Includes (1) 5 ft. PVC Inlet Hose, (2) Clamps, (1) Sheet Metal Connector Sleeve
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Hose Extension Kit For 2-Stage Collectors
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.34 to 7.3, 1 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 4.2/2.1 A Amps AC, Hose Dia. (In.) 5 in, 82 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Dust Collector, Two Stage Central, Max. Flow (CFM) 2,900 cfm, Operating Velocity Range (FPM) 11,800 fpm, Static Pressure Range (In.) 2.01 to 13, 7 1/2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 18 A Amps AC, Hose Dia. (In.) 7 in, 85 dBA dBA, Drum Dia. (In.) 22 in to 24 in, 5 micron Filter Bag, Includes 5 micron Dust Collection Bag, All Hardware for Assembly for Operation at 230V Only, Fiberglass Lid with Hose and Clamps, Power Control Box
Engraving Bit, For Use With 2LKU6 Electric Engraver, Engraving, Grooving and Slotting, Tool Length 1.5, Tool Weight 0.4 lb, Includes 2 Pack, Package Quantity 2
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 12 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Angle Gauge No, Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 0.55 to 6.6, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) 30, Hose Dia. (In.) 4 in, 86 dBA, Drum Dia. (In.) -, 30 micron Filter Bag, Cord Length 8 ft, Cord Type SJTW 5-15 3 Prong Plug, Includes and Built-in Wheels, One 4 in x 9 ft Wire-reinforced PVC Inlet Hose and Clamps, Upper and Lower 30-Micron Cloth Bags
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Reviews
There are no reviews yet.