Dayton Slip Roll, 50 In, 16 Ga.
Original price was: $518.00.$95.99Current price is: $95.99.
Slip Roll, Max. Forming Width (In.) 50 in, Max. Capacity 16 ga, Dia. of Rolls (In.) 3 in, Min. Radius (In.) 1 1/2 in, Ground And Polished Steel Rolls With Wire Grooves, Large Roll Adjusting Screws, Hand Crank Has 4:1 Gear Reduction, Form Cylinders, Reverse Curves And Radius Bends Of Sheet Metal, Designed For Bench Or Table Mounting With Front-mounted Handle For Easy Placement And Release Of Workpiece.
Dayton #13W883 Specifications
- Zoro #: G3975413
- Mfr #: 13W883
- Item: Slip Roll
- Application: Form Cylinders, Reverse Curves And Radius Bends Of Sheet Metal, Designed For Bench Or Table Mounting With Front-mounted Handle For Easy Placement And Release Of Workpiece.
- Dia. of Rolls (In.): 3 in
- Max. Forming Width (In.): 50 in
- Min. Radius (In.): 1 1/2 in
- Max. Capacity: 16 ga
- Characteristics: Ground and Polished Steel Rolls with Wire Grooves, Large Roll Adjusting Screws, Hand Crank has 4:1 Gear Reduction
- Material: Steel
- Power Source: Manual
- Minimum Bend Radius: 1 1/2 in
- Cone Rolling: Yes
- Sheet Metal Capacity Mild Steel: 16 ga
- Number of Rollers: 3
- Bottom Roller Diameter: 3 in
- Actuation: Hand Crank
- Sheet Metal Capacity Stainless Steel: 22 ga
- Maximum Bending Length: 50 in
- Sheet Capacity Aluminum: 12 ga
- Top Roller Diameter: 3 in
- Country of Origin (subject to change): China
Related Products
Dust Collector, Two Stage Portable, Max. Flow (CFM) 600 cfm, Operating Velocity Range (FPM) 5,500 fpm, Static Pressure Range (In.) 1.51 to 7.1, 3/4 hp HP, 115/230V AC Voltage, 60 Hz Hz, Single, 7.5 A Amps AC, Hose Dia. (In.) 4 in, 79 dBA dBA, Drum Dia. (In.) 18 in to 19 1/2 in, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord, Drum Not Included
Dust Collector, Two Stage Portable, 3-Phase, Max. Flow (CFM) 1,310 cfm, Operating Velocity Range (FPM) 6,900 fpm, Static Pressure Range (In.) 1.64 to 9, 2 hp HP, 230/460V AC Voltage, 60 Hz Hz, Three, 5.2 A Amps AC, Hose Dia. (In.) 6 in, 83 dBA dBA, Drum Dia. (In.) 22 a 24, 5 micron Filter Bag, Includes 5 ft Wire-Reinforced PVC Inlet Hose and Clamps, 5 micron Dust Collector Bag, 8 ft Power Cord
Combination Shear, Bending Length (In.) 40.5 in, Cutting Width (In.) 40 1/2 in, Rolls Min 1 11/16 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 1 in, 1 1/2 in, 2 in, 4 in, 7 in, 10 in, 15 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 1 1/2, 2, 4, 7, 10, 15 in , Continuous Female V Shaped Forming
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
Dust Collector, Two Stage Portable, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 6,900, Static Pressure Range (In.) 1.47 to 7.3, 1 1/2 hp HP, 115/230 Voltage, 60 Hz, 1, 16/8 Amps AC, Hose Dia. (In.) 5 in, 82 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes One 5-feet Wire-reinforced PVC Inlet Hose and Clamps, 5-micron Dust Collector Bag and 8-feet Power Cord(Drum Not Included)
Collapsible Drum, 55 Gal., For Use With 3AA17, 3AA18, 3AA21, 3AA25, 3AA26, 3AA29
Dust Collector, Single Stage, Max. Flow (CFM) 650, Min. Air Flow (CFM) 650, Operating Velocity Range (FPM) 6,300, Static Pressure Range (In.) 6.50, 3/4 hp HP, 120 Voltage, 60 Hz, 1, 4.5 Amps AC, Chip Capacity (Microns) 5, Drum Capacity (Gal.) 22, Height (In.) 61 in, Width (In.) 19 3/4 in, Depth (In.) 35 1/2 in, Overall Height (In.) 61 in, Overall Width (In.) 19 3/4 in, Overall Depth (In.) 35 1/2 in, Max. Hose Length (Ft.) 6.5, Hose Dia. (In.) 4 in, 88 dBA, Drum Dia. (In.) 15-3/4
Dust Collector, Single Stage Mobile, Max. Flow (CFM) 660, Min. Air Flow (CFM) 173.5, Operating Velocity Range (FPM) 6790 to 7970 +/-10 Percent, Static Pressure Range (In.) 4 to 8.5, 1 hp HP, 115/230 Voltage, 60 Hz, 1, 11 Amps AC, Chip Capacity (Microns) 30, Drum Capacity (Gal.) -, Height (In.) -, Width (In.) -, Depth (In.) -, Overall Height (In.) 72 in, Overall Width (In.) 15 in, Overall Depth (In.) 29 in, Max. Hose Length (Ft.) 6, Hose Dia. (In.) 4 in, 65 dBA, Drum Dia. (In.) –
Crank Handles, For Use With Grainger Item Number 13W881, Fits Brand DAYTON
Dust Collector, Two Stage Central, Max. Flow (CFM) 3,200, Operating Velocity Range (FPM) 13,000, Static Pressure Range (In.) 1.91 to 14, 10 hp HP, 230/460 Voltage, 60 Hz, 3, 21 Amps AC, Hose Dia. (In.) 7 in, 86 dBA, Drum Dia. (In.) 22 to 24, 5 micron Filter Bag, Includes Fiberglass Lid with Hose and Clamps, 5-micron Dust Collection Bag, Power Control Box and All Hardware for Assembly
Replacement Carbide Engraver Bit, For Use With 12T034, Replacement Bit For Continuous Use, Tool Length 0.63 in, Tool Weight 0.3 lb, Includes (2) Tungsten Carbide Bits
Reviews
There are no reviews yet.