Dewalt 20V MAX* Cordless Cable (Tool Only)
Original price was: $235.39.$98.99Current price is: $98.99.
Cordless Cable Stapler, Cordless Tool Kit Contents (1) Bare Tool, Cordless, Brushless Motor No, Voltage 20V DC, Firing Mode Sequential, Depth Control Yes, For Staple Gauge 18 ga, For Staple Leg Length 1 in, For Staple Type Insulated, For Staple Width 1 in, Staple Capacity 35, Clinch Direction None, Number of Batteries Included 0, Battery Series 20V Max, Charger Included No, Case Included No, Housing Material Plastic, Overall Length 7 3/4 in, Overall Width 3 in, Overall Height 12 in. The DEWALT®20V MAX* Cordless Cable Stapler is built for residential wiring applications, primarily fastening Romex® brand wires and cables. Made in the USA with global materials, this stapler has a proprietary cable guide that helps to drive staples over cable. The compact frame and lightweight design are ideal for tight spaces. A center-mounted LED light helps to eliminate shadows and illuminate the work area in low light conditions. Compatible with DEWALT DRS18100 1" insulated cable staples (sold separately). *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Dewalt #DCN701B Specifications
- Zoro #: G9660928
- Mfr #: DCN701B
- Promotion Restriction: Not eligible for promotion
- Item: Cordless Cable Stapler
- Voltage: 20V DC
- Crown: 1 in
- Leg Length: 1 in
- Fastener Type: Staples Only
- Recommended Staples: 1/4 in
- Cordless Tool Battery Type: Li-Ion
- Series: 20V Max
- Corded/Cordless: Cordless
- Overall Height: 12 in
- Included Charger: No
- Features: Adjustable Belt, Bottom Load Magazine
- Length: 7 3/4 in
- Brushless Motor: No
- Width: 3 in
- Battery Capacity: No
- Overall Width: 3 in
- Height: 12 in
- Standards: ANSI
- Tool Weight: 4.7 lb
- Overall Length: 7 3/4 in
- Charger Replacement: Mfr. No. DCB112
- Includes: Belt Clip
- Power Source: Cordless
- Depth Control: Yes
- Case Included: No
- For Staple Leg Length: 1 in
- Clinch Direction: None
- Built-In Light: Yes
- Cordless Tool Kit Contents: (1) Bare Tool
- Number of Batteries Included: 0
- Staple Capacity: 35
- For Staple Gauge: 18 ga
- For Staple Type: Insulated
- Charger Included: No
- For Staple Width: 1 in
- Battery Series: 20V Max
- Housing Material: Plastic
- Wireless Tool Tracking: No
- Firing Mode: Sequential
- Country of Origin (subject to change): United States
Related Products
Cordless Impact Wrenches, Impact Wrench, Drive Size 1/2 in Square, Drive Configuration Straight, Max. Torque 1,000 ft-lb, Bare Tool, Voltage 18V DC, Series M18, Cordless Tool Battery Type Li-Ion, Brushless Motor Yes, Anvil Impact Action Mechanical, Max. Blows per Minute 2100, Max. No Load RPM 1750, Cordless, Handle Type Pistol Grip, Tool Length 8-25/64 In., Tool Weight 5.9 lb, Clutch Style Impact, Battery Included No, Battery Pack Replacement 35GJ99
The M18TM REDLITHIUMTM HIGH OUTPUTTM XC6.0 battery pack provides 50% more power and runs 50% cooler vs M18TM REDLITHIUMTM XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18TM products. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18TM REDLITHIUMTM HIGH OUTPUTTM XC6.0 provides increased power in extreme cold weather conditions (below 0F / -18C) and delivers more work per charge, driving corded replacement on the jobsite. The REDLITHIUMTM HIGH OUTPUTTM XC6.0 battery is fully compatible with 150+ M18TM solutions.
Cordless Screwdriver Kits, Screwdriver Kit, Autofeed No, Chuck Size 1/4 in, Battery Included / Bare Tool Battery Included, Voltage 3.6V DC, Max. Torque 39 in-lb, No Load RPM 0 to 600, Clutch Style Adjustable, Series Standard, Cordless, Brushless Motor No, Handle Type Pivot, Cordless Tool Battery Type Li-Ion, Battery Capacity (2) 1.5 Ah, Battery Included (2) 22EC35, Battery Pack Replacement 22EC35, Tool Length 10 13/16 in, Tool Weight 1.1 lb, Includes (2) Battery Packs, Carrying Case, Charger
Cordless Screwdriver Kits, Screwdriver Kit, Autofeed No, Chuck Size 1/4 in, Battery Included / Bare Tool Battery Included, Voltage 8V DC, Max. Torque 23 in-lb, No Load RPM 0 to 430, Clutch Style Standard, Series 8V MAX*, Cordless, Brushless Motor No, Handle Type Pivot, Cordless Tool Battery Type Li-Ion, Battery Capacity (1) 1.0 Ah, Battery Included 20UH17, Battery Pack Replacement 20UH17
Each product within the Milwaukee knockout system was built upon the principles of reducing the tedious steps of hole making, improving the speed of the process, and limiting the fatigue of the user. The M18TM Force LogicTM 6 ton knockout tool carries these benefits forward to service applications. It is powerful enough to punch up to 4 in. holes in 14 gauge mild steel and 40% lighter weight. Its compact, right angle design delivers the best clearance in tight spaces. The quick connect alignment system delivers easy set-up without the weight of the tool, and speeds up repetitive punching. The EXACTTM punches and dies are rated for both mild and stainless steel punching. Vivid red cross hairs aid in accurate alignment, and the gripping surface on punches enables faster threading. The M18TM Force LogicTM 6 ton knockout tool delivers the easiest way to punch!
With the introduction of the new M4TM 2-speed screwdriver, Milwaukee Tool commits to a new line of cordless products in the 4 V category utilizing the company’s REDLITHIUM 2.0 battery technology. The new screwdriver incorporates the latest Milwaukee core technologies in motor, REDLITHIUMTM intelligence electronics and REDLITHIUM 2.0 batteries, increasing the tool’s power and run-time, while shrinking its size. Featuring 44 in-lbs of peak torque and a 21-position clutch with auto shut-off, the new screwdriver offers improved torque control during repetitive applications. Two speeds, 200 and 600 RPM, offer further user control for precision work. At only 244 millimeters in length and under one pound, the M4TM screwdriver is easy to use with one hand, featuring 1/4 in. quick-change chuck for one-handed bit changes.
The M18TM REDLITHIUMTM HIGH OUTPUTTM HD12.0 battery pack provides 50% more power and runs 50% cooler vs M18TM REDLITHIUMTM HD battery packs. The massive increase in power elevates the performance of the entire M18TM system and drives the next breakthrough in M18 FUELTM, generating the power of 15 A corded product. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18TM REDLITHIUMTM HIGH OUTPUTTM HD12.0 is the best performing cold weather pack ever made, providing increased power in extreme cold weather conditions (below 0F / -18C). It provides the most work per charge of any professional power tool battery in the industry, driving full corded replacement on the jobsite. The REDLITHIUMTM HIGH OUTPUTTM HD12.0 battery is fully compatible with 150+ M18TM solutions.
The MILWAUKEE® M18 FUELTM 4-1/2” – 6” Braking Grinder, Paddle, No-Lock is the highest performing small angle grinder. It generates the power of a 13A corded grinder, brakes all accessories under 3 seconds, and has 6” grinding capacity. The POWERSTATETM Brushless Motor delivers 9,000 RPM and the power equivalent of a 13A corded grinder. REDLINK PLUSTM Intelligence ensures maximum performance and protects the angle grinder from overload, overheating and over discharge. Rapid Stop Braking stops all accessories in under 3 seconds. Providing high performance, advanced ergonomics and legendary durability, the M18 FUELTM 4-1/2” – 6” Braking Grinder is designed to complete the toughest grinding, surface preparation and cutting applications with all 4-1/2” – 6” accessories. The M18TM REDLITHIUMTM HIGH OUTPUTTM XC6.0 Battery provides more material removed per charge and unmatched run-time in all applications. Tool-free accessory changes using the FIXTEC nut and tool-free guard adjustments ensures less downtime as they work. The angle grinder's grinding wheel is sold separately.
The 2864 M18TM FUELTM w/ONE-KEYTM high torque 3/4 in. impact wrench with friction ring provides the most powerful, most compact, and the most repeatable impact wrench in the industry! The POWERSTATETM brushless motor delivers up to 1,200ft-lbs of fastening torque and 1500ft-lbs of nut-busting torque, providing users a cordless solution that will eliminate the need for corded impact wrenches. The industry’s most compact cordless high torque impact wrench at 8.59 in. in length, this tool allows for more access in tight spaces. REDLINK PlusTM intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUMTM batteries deliver more work per charge and more work over the life of the battery. Compatible with one-key, this is the industry’s first high torque impact wrench that wirelessly connects to a smart phone to customize, track and manage a tool’s performance and location. Unlimited tool customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. With ONE-KEYTM, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The tool’s memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time.
The Milwaukee 48-59-1806 is a M18 sequential 6 port charger. The charger holds up to 6 batteries at a time, and charges them sequentially, one at a time. The charger also offers a compact design, integrated hang holes for vertical mounting, and a pass through plug to conserve outlet space. The new unit will charge M18 compact batteries in 30 minutes, and extended capacity (XC) batteries in 60 minutes. With this new six pack charger, users can reduce the amount of time spent changing out batteries, increasing productivity on the jobsite.
Delivers up to 3X more runtime, 20% more power and 2X more life than standard lithium-ion batteries. The M12TM REDLITHIUMTM 3.0 compact battery pack features superior pack construction, electronics and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. With Milwaukee durability built into each pack, this battery runs cooler and performs in climates below 0°F/-18°C. Its compact design fits in tight work spaces and reduces user fatigue. Managed by Milwaukee's exclusive REDLINKTM Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Upgrade to the M12TM REDLITHIUMTM 3.0 compact battery pack to instantly increase the runtime and durability of your Milwaukee M12 cordless tools.
Milwaukee® Tool is bringing you more power in less space with the new M12TM 600 MCM cable cutter. Using a break-through powered ratcheting mechanism and superior blade geometry, it cuts through large cables with ease leaving a clean, installation ready cut. And the compact size and scissor style jaws empower you to cut cable in crowded panels without looping, ratcheting or long arms, making you more productive than ever.
Reviews
There are no reviews yet.