Dewalt 20V MAX* XR(R) 18 GA Cordless Flooring Stapler (Tool Only)
Original price was: $373.98.$95.99Current price is: $95.99.
Staple Gun, Cordless Tool Kit Contents (1) Bare Tool, Cordless, Brushless Motor Yes, Voltage 20V DC, Firing Mode Combination, Depth Control Yes, For Staple Gauge 18 ga, For Staple Leg Length 1/2 in to 1 1/2 in, For Staple Type Crowned, For Staple Width 1/4 in, Staple Capacity 100, Clinch Direction None, Number of Batteries Included 0, Battery Series 20V Max XR, Charger Included No, Case Included No, Housing Material Plastic, Overall Length 11 3/4 in, Overall Width 3 3/4 in. The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * – Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.͍
Dewalt #DCN682B Specifications
- Zoro #: G1456329
- Mfr #: DCN682B
- Promotion Restriction: Not eligible for promotion
- Item: Staple Gun
- Voltage: 20V DC
- Crown: 1/4 in
- Leg Length: 1/2 in to 1-1/2 in
- Fastener Type: Narrow Crown Staples
- Recommended Staples: 1/4 in
- Cordless Tool Battery Type: Li-Ion
- Series: 20 Max XR
- Corded/Cordless: Cordless
- Handle Type: D Style
- Height: 12 13/64 in
- Depth Control: Yes
- Tool Weight: 6.2 lb
- Battery Included: No
- Width: 3 45/64 in
- Battery Pack Replacement: 21RV47
- Magazine Capacity: 100
- Triggering Mode: Contact
- Length: 11 45/64 in
- Magazine Loading: Rear
- Staple Capacity: 100
- For Staple Gauge: 18 ga
- Features: 3 LED Fuel Gauge System, Adjustable Belt, Bottom Load Magazine
- Number of Batteries Included: 0
- Firing Mode: Combination
- Housing Material: Plastic
- Built-In Light: Yes
- Case Included: No
- Clinch Direction: None
- Overall Length: 11 3/4 in
- Overall Height: 12 1/4 in
- Cordless Tool Kit Contents: (1) Bare Tool
- Charger Included: No
- For Staple Leg Length: 1/2 in to 1 1/2 in
- For Staple Width: 1/4 in
- Overall Width: 3 3/4 in
- For Staple Type: Crowned
- Power Source: Cordless
- Brushless Motor: Yes
- Battery Series: 20V Max XR
- Wireless Tool Tracking: No
- Standards: ANSI
- Country of Origin (subject to change): Mexico
Related Products
The (2696-26) M18TM cordless lithium-ion 6-tool Combo kit includes the 1/2 in. hammer drill / driver (2602-20), SAWZALL® Reciprocating Saw (2621-20), circular saw (2630-20), 1/4 in. hex impact driver (2650-20), 4.5 in. cut-off/grinder (2680-20), and work light (49-24-0171). The M18TM cordless lithium-ion system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by Red LithiumTM the M18TM cordless system delivers more torque, more power, and longer run-time than the competition.
Cordless Screwdriver Kits, Screwdriver Kit, Autofeed No, Chuck Size 1/4 in, Battery Included / Bare Tool Battery Included, Voltage 3.6V DC, Max. Torque 39 in-lb, No Load RPM 0 to 600, Clutch Style Adjustable, Series Standard, Cordless, Brushless Motor No, Handle Type Pivot, Cordless Tool Battery Type Li-Ion, Battery Capacity (2) 1.5 Ah, Battery Included (2) 22EC35, Battery Pack Replacement 22EC35, Tool Length 10 13/16 in, Tool Weight 1.1 lb, Includes (2) Battery Packs, Carrying Case, Charger
Replacement for Milwaukee 48-11-1830
The 2864 M18TM FUELTM w/ONE-KEYTM high torque 3/4 in. impact wrench with friction ring provides the most powerful, most compact, and the most repeatable impact wrench in the industry! The POWERSTATETM brushless motor delivers up to 1,200ft-lbs of fastening torque and 1500ft-lbs of nut-busting torque, providing users a cordless solution that will eliminate the need for corded impact wrenches. The industry’s most compact cordless high torque impact wrench at 8.59 in. in length, this tool allows for more access in tight spaces. REDLINK PlusTM intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUMTM batteries deliver more work per charge and more work over the life of the battery. Compatible with one-key, this is the industry’s first high torque impact wrench that wirelessly connects to a smart phone to customize, track and manage a tool’s performance and location. Unlimited tool customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. With ONE-KEYTM, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The tool’s memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time.
The world’s first brushless die grinder that delivers corded performance with up to 25 minutes of grinding and up to 10X longer motor life. The M18 FUELTM 1/4 in. die grinder delivers maximum sustained power with 20,000 RPMs capable of running Carbide burrs or up to 3 in. flap wheels for grinding or surface preparation applications. The M18TM REDLITHIUMTM XC5.0 battery provides up to 25 minutes of grinding with superior pack construction and electronics. The POWERSTATETM brushless motor provides up to 10X longer motor life and lower cost of ownership than traditional brushed motors. The die grinder features REDLINK PlusTM intelligence, the most advanced system of cordless power tool electronics, for maximum performance and longest too life.
The M18TM REDLITHIUMTM HIGH OUTPUTTM XC6.0 battery pack provides 50% more power and runs 50% cooler vs M18TM REDLITHIUMTM XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18TM products. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18TM REDLITHIUMTM HIGH OUTPUTTM XC6.0 provides increased power in extreme cold weather conditions (below 0F / -18C) and delivers more work per charge, driving corded replacement on the jobsite. The REDLITHIUMTM HIGH OUTPUTTM XC6.0 battery is fully compatible with 150+ M18TM solutions.
Cordless Screwdriver Kits, Screwdriver Kit, Autofeed No, Chuck Size 1/4 in, Battery Included / Bare Tool Battery Included, Voltage 12V DC, Max. Torque 160 UWO, No Load RPM 0 to 1050, Clutch Style Adjustable, Series 12V MAX*, Cordless, Brushless Motor No, Handle Type Pistol Grip, Cordless Tool Battery Type Li-Ion, Battery Capacity (2) 1.3 Ah, Battery Included (2) 6CXN0, Features Compact, Lightweight, One Handed Loading 1/4 in Hex Chuck That Accepts 1 in Tips, Tool Length 6 1/4 in. The DCF610S2 12V MAX* 1/4" Screwdriver Kit is essential for any professional to have as it is compact for reaching tight spaces, lightweight to increase productivity, and has three LED lights to allow users to work in dark spaces.
Jobsite Cordless Fan, Voltage 20V DC, Bare Tool, Non-Oscillating, Blade Dia. 11 in, Number of Speeds Variable, Air Flow 650 cfm, Cordless, Height 16 in
Cordless Impact Wrenches, Impact Wrench, Drive Size 1/2 in Square, Drive Configuration Straight, Max. Torque 1,000 ft-lb, Bare Tool, Voltage 18V DC, Series M18, Cordless Tool Battery Type Li-Ion, Brushless Motor Yes, Anvil Impact Action Mechanical, Max. Blows per Minute 2100, Max. No Load RPM 1750, Cordless, Handle Type Pistol Grip, Tool Length 8-25/64 In., Tool Weight 5.9 lb, Clutch Style Impact, Battery Included No, Battery Pack Replacement 35GJ99
Angle Grinder, Head Type Standard Head, Grip Style Barrel Grip, Voltage 18V DC, Wheel Diameter 4 1/2 in, For Wheel Type Type 1, Type 27, Brushless Motor No, Cordless Tool Kit Contents (1) Bare Tool, Safety Features Adjustable Guard, Switch Type Paddle, Lock-Off Switch No, Lock-On Switch Yes, Max. Speed 10,000 RPM, Accessory Free Tool Change Yes, Spindle Thread Size 5/8 in-11, Guard Adjustment Toolless Adjustable, Anti-Restart Technology No, Anti-Kickback Clutch Type None
Portable Pipe Beveling Machine, Pipe Capacity 4 In. to 12 In., Power Requirements 115V, For Wall or Plate Thickness 0.188 In. to 0.500 In., Width 11-1/2 In., Length 15-7/8 In., Height 13-5/16 In., Attachment Type Clamp or PSA, Speed Range 950 rpm, Includes Manual Crank Handle, Cutter Head, Edged Inserts, Torque Driver, Screws
The Milwaukee 48-59-1806 is a M18 sequential 6 port charger. The charger holds up to 6 batteries at a time, and charges them sequentially, one at a time. The charger also offers a compact design, integrated hang holes for vertical mounting, and a pass through plug to conserve outlet space. The new unit will charge M18 compact batteries in 30 minutes, and extended capacity (XC) batteries in 60 minutes. With this new six pack charger, users can reduce the amount of time spent changing out batteries, increasing productivity on the jobsite.
Reviews
There are no reviews yet.