Dewalt 21 lb. SDS Max In-Line Demolition Hammer
Original price was: $438.00.$96.99Current price is: $96.99.
Demolition Hammer Kit, Handle Type Chipper, Chuck Style SDS-Max, Impact Energy 13.2 ft-lb, Maximum Blows per Minute 2,040 bpm, Tool Weight 21.2 lb, Current 14 A, Number of Speed Settings Continuous, Vibration Level 11.5 m/sq sec, Sound Level 100 dB, Number of Chisel Positions 12, Voltage 120V AC, Power Source Corded, Kit Contents (1) Bare Tool, Minimum Blows per Minute 0 bpm, Application Demolition, Blows per Minute 0 to 2,040, Handle Grip Material Rubber, Motor Type Electric
Dewalt #D25899K Specifications
- Zoro #: G2769426
- Mfr #: D25899K
- Promotion Restriction: Not eligible for promotion
- Item: Demolition Hammer Kit
- Voltage: 120V AC
- Amps: 14.0 A
- Blows per Minute: 2040
- Tool Length: 25 3/4 in
- Tool Weight: 21.2 lb
- Corded/Cordless: Corded
- Corded/Banded: Corded
- Impact Energy: 13.2 ft-lb
- Handle Type: D-Handle
- Features: One Hand Chisel Rotation 12 Position, Slider Lock-on Switch
- Demolition Tool Product Grouping: Demolition Hammer Kits
- Includes: Carrying Case, Side Handle
- Drive System: SDS Max
- Overall Width: 16 in
- Application: Demolition
- Overall Height: 6 3/4 in
- Kit Contents: (1) Bare Tool
- Minimum Blows per Minute: 0 bpm
- Handle Grip Material: Rubber
- Number of Speed Settings: Continuous
- Series: SDS-Max
- Sound Level: 100 dB
- Power Source: Corded
- Chuck Style: SDS-Max
- Current: 14 A
- Maximum Blows per Minute: 2,040 bpm
- Number of Chisel Positions: 12
- Motor Type: Electric
- Vibration Level: 11.5 m/sq sec
- Country of Origin (subject to change): Czechia
Related Products
Nail Gun, Cordless Tool Kit Contents (1) Bare Tool, (2) Batteries, (1) Charger, Cordless, 20V DC, DEWALT(R), Series 20V MAX XR, Brushless Motor Yes, Tip Standard, Depth Control Yes, Max. Fastening Rate 1 per second, Firing Mode Sequential, Collation Style Strip, Collation Type Plastic, Collation Angle 15 Degrees , For Nail Head Style Flat, For Nail Length Range 1/2 in to 2 1/4 in, For Nail Shank Diameter 0.102 in to 0.145 in, Nail Capacity 33, Built-In Light Yes, Battery Capacity 5.0 Ah
Cordless Screwdrivers, Screwdriver, Autofeed No, Chuck Size 1/4 in HEX, Battery Included / Bare Tool Battery Included, Voltage 8V DC, Max. Torque 23 in-lb, No Load RPM 0 to 430, Clutch Style Standard, Series 8V MAX*, Cordless, Brushless Motor No, Handle Type Pivot, Cordless Tool Battery Type Li-Ion, Battery Capacity (2) 1 Ah, Battery Included (2) 20UH17, Battery Pack Replacement 20UH17. The DCF681N2 8V MAX* Gyroscopic Screwdriver With Conduit Reamer features speed variations allowing users to choose the level of performance needed for various applications. Allows for quick screwdriver bit change and holds 1" bit tips.
Cordless Impact Wrenches, Impact Wrench, Drive Size 1/2 in Square, Drive Configuration Straight, Max. Torque 330 ft-lb, Bare Tool, Voltage 20V DC, Series 20V MAX, Cordless Tool Battery Type Li-Ion, Brushless Motor Yes, Anvil Impact Action Mechanical, Max. Blows per Minute 3100, Max. No Load RPM 2000, Cordless, Handle Type Pistol Grip, Tool Length 6-61/64 In., Tool Weight 3.5 lb, Clutch Style Hex, Battery Included No, Battery Pack Replacement Mfr. No. DCB205. The DCF896 Mid-Range Impact Wrench is based off of the latest edition to the DEWALT® impact wrench family, the DCF894. Integrated Bluetooth® technology pairs this tool with the free Tool ConnectTM mobile app and online inventory manager portal, allowing users to track, manage and customize the tool settings. Through the app, users are able to program three customized modes based on individual needs and have control over forward and reverse speed to account for different fastener sizes and types, LED brightness and delay as well as Precision WrenchTM and the all new exclusive Precision TapTM modes. Within Precision WrenchTM, users can program the tool to automatically shut off after impacting for a set amount of time, useful for those performing repeatable applications and helps with tightening consistancy by removing variability in impact time. Precision TapTM mode is designed to make tapping threads faster and easier by having the tool automatically alternate between forward and reverse, keeping rotations consistant and eliminating the need to manually change the tool's direction. Use this tool along with other Tool ConnectTM offerings for a complete management solution.
Cordless Screwdriver Kits, Screwdriver Kit, Autofeed No, Chuck Size 1/4 in, Battery Included / Bare Tool Battery Included, Voltage 8V DC, Max. Torque 23 in-lb, No Load RPM 0 to 430, Clutch Style Standard, Series 8V MAX*, Cordless, Brushless Motor No, Handle Type Pivot, Cordless Tool Battery Type Li-Ion, Battery Capacity (1) 1.0 Ah, Battery Included 20UH17, Battery Pack Replacement 20UH17
Right Angle Attachment, Overall Length 12 in, For Use With 18 to 20V Impact Driver and Drill Tool Brands, Impact Rated Yes. With a 12” Right Angle Flex Shaft, DEWALT Bit Holders enable users to reach nearly any hard-to-reach space. A Rapid LoadTM head enables fast, easy bit changes, and each fastener is supported by a magnet for accurate alignment. A side handle offers additional leverage and support.
Cordless Angle Grinder, Bare Tool, Voltage 20.0 V, Wheel Dia. 4 1/2 in, 8,000 RPM No Load RPM, Cordless Tool Battery Type Li-Ion, Series 20V MAX(TM), Brushless Motor No, Switch Type Trigger, Lock-on No, Lock-off Yes, Tool Length 14 in, Battery Included No, Speed Type Single, Battery Pack Replacement 11A165, Battery Capacity 3.0 Ah, Spindle Thread Size 5/8 In.-11, Tool Weight 5.1 lb, Features 2-Position Side Handle, Quick Change(TM) Wheel Release, Tool Free Guard. The DCG412B 20V MAX* Lithium Ion 4-1/2" / 5" Grinder increases productivity with features like Quick-ChangeTM wheel release, convenient trigger switch with lock-off button, and extended run-time battery.
Jobsite Cordless Fan, Voltage 20V DC, Bare Tool, Non-Oscillating, Blade Dia. 11 in, Number of Speeds Variable, Air Flow 650 cfm, Cordless, Height 16 in
Power Station, Number of Ports 4, Charge Time 2 hr, Battery Capacity Charged in 1-Hour 2 Ah, Inverter Output Voltage 120V DC, Inverter Output Current 15 A, Charger Input Voltage 120V AC, Charging Port Voltage (4) 20V, Inverter Peak Watts 3,600 W, Inverter Rated Watts 1,800 W, Charging Type Simultaneous, For Battery Chemistry Li-Ion, Plug Type Three-Prong, Includes Unit Only, Wireless Tool Tracking No, Tool Brand DEWALT(R). The 1800 Watt Portable Power StationTM and Simultaneous Battery Charger allows for AC power in remote locations for convenient portable power. Able to run most corded tools, it provides 1800 Watts (15 amps) continuous power and 3600 Watts peak power. The DCB1800B runs on four DEWALT 20V MAX* batteries (including FLEXVOLT), and for high power applications, four 20V MAX* 3.0Ah DEWALT Batteries (DCB200) or higher amp hour are recommended to provide the best results. Not only can the 1800 Watt Portable Power StationTM power a corded tool remotely, but it also becomes a multi-port simultaneous charger for up to four DEWALT 20V MAX* Batteries (including FLEXVOLT) when plugged into a wall outlet via extension cord (batteries and extension cord sold separately). Compact and lightweight, the 1800 Watt Portable Power StationTM weighs just 18lbs (without batteries) and is easily portable. Without the need for gas to run, there are no fumes or carbon monoxide emitted from the device. In addition, the 1800 Watt Portable Power StationTM can be used to provide temporary power in areas where noise is restricted such as a jobsite with strict regulations. With an integrated temperature-controlled cooling fan and heavy-duty roll cage, the Portable Power StationTM is a durable and convenient power solution for a variety of uses.
Battery, Battery Capacity 2 Ah, Battery Chemistry Li-Ion, Charger Included No, Number of Batteries Included 2, Voltage 20V DC, Cordless Tool Kit Contents (2) Batteries, Charger Input Voltage 120V AC, Battery Series 20V MAX*, Cordless Tool Battery Platform 20V MAX*, Wireless Tool Tracking No, Package Quantity 2. The DCB203-2 20V MAX* Compact Lithium Ion 2-Pack has an extended run-time battery and provides immediate feedback on state of charge with the 3-LED Fuel Gauge System.
Battery, Battery Capacity 3 Ah, Battery Chemistry Li-Ion, Charger Included No, Number of Batteries Included 2, Voltage 12V DC, Cordless Tool Kit Contents (2) Batteries, Charger Input Voltage 120V AC, Battery Series 12V MAX*, Cordless Tool Battery Platform 12V MAX*, Wireless Tool Tracking No
Framing Nailer Service Kit, For Use With Mfr. No. DCN690, Mfr. No. DCN692, Application Nail Gun, Number of Pieces 10. The DCN6901 Replacement Return Spring Kit for Cordless Framer is a complete service kit to replace the return springs on DCN690 and DCN692 Cordless Framing Nailer.
Battery Adapter, For Use With 18V DEWALT(R) Tools, Battery Series 20V MAX, Number of Pieces 1, Number of Ports 1, Voltage 20V DC.
Reviews
There are no reviews yet.