Big Horn 11415 4 x 4 Inch Quick Disconnect – Spiral End (Replaces Jet JW1047)

Big Horn's 4-5/8-Inch flanged elbow easily mounts to the side of a cabinet saw or other machine for attaching a 4-Inch dust hose. Use a hose clamp (not included) for best connection.

Big Horn Blast Gates optimizes the efficiency of your dust collection system by seamlessly directing the airflow from one machine to another. Save time and hassle with the handy sliding gate; just glide the gate through the case for a thorough cleaning.

Wall mount feature on this Big Horn Blast Gate Dust Collection Fitting provides a large, 6-1/2" x 3-1/4" flange with mounting holes to attach the fitting on the wall in either the horizontal or vertical direction. Common blast gate function allows you to close one branch of your central dust collection system while you are using the other. Simple open or shut design has flat, square plate that moves inside a 3-sided frame to provide a pass-through or shut-off to connect your dust collector to your system or a branch line to one of your tools. Molded fitting has overall dimensions of 6-1/2" long and 5-1/2" wide closed; 10-1/4" long and 5-1/2" wide in the open position. The 4" port on either side of the gate is 1-1/2" long to provide room to slide on hose and apply hose clamps at each connection. Molded using ABS material to maintain shape and withstand wood shop environment. Unsecured blast gates can be sloppy and tedious to operate. Opening the gate often pulls the hose away from the wall. With its built-in mounting element, the Big Horn wall mounted blast gates take care of everything. Just anchor it directly to the wall for clean and stable operation.

Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suction strongest where dust is being produced, thus maximizing dust extraction. Outer case made from cast aluminum with sliding steel gate and locking knob. Typical gate allow debris to accumulate in the groove preventing the gate from closing fully, causing leaking and reducing suction. The slot on these units extends through the back of the base to allow debris to be pushed out of the groove and prevent buildup.

Big Horn Blast Gates optimizes the efficiency of your dust collection system by seamlessly directing the airflow from one machine to another.Save time and hassle with the handy sliding gate. just glide the gate through the case for a thorough cleaning.Used in every dust collection system to control air flow from one machine to another, blast gates maximize system efficiency.Plastic blast gates are economically priced, have a textured surface and an easy sliding gate action

Big Horn's 5-Inch by 4-Inch by 4-Inch Y-Adapter is used to branch off your dust collection line like a regular Y-adapter (connector), while reducing your branch offs down to 4-Inch. For best connection use hose clamp (not included).

Big Horn 11515 5" x 4" Quick Adapter. Adapt to any situation with this fitting by cutting it for the in and out diameters you need. Use Big Horn's 5-Inch by 4-Inch quick connect adapter to connect your 4-Inch hose to any 5-Inch accessory for a quick and secure fit. The threaded end allows you to simply thread the hose on, while the other end can be pressed on.