Hardin 5" Var Spd Polisher, Triad Planetary Concrete Wet Polisher Base w/12 pc 4" Diamond Polishing Pad Set

The Hardin Dual Vac System supplied with this set confines both dust and water in a controlled environment. While polishing on site, the need to keep water spray from damaging expensive wooden floors and cabinets can be challenging. Concrete dust can also be difficult to clean and is dangerous to breath. With the Dual Vac System, these damaging and toxic materials are contained and removed by simply hooking up your shop vac. To work with the shroud, simply attach the 6 inch DVS shroud to the wet polisher and attach your shop vac to the 1 1/4 inch vacuum adapter

The 110 volt SECCO 4" variable speed wet polisher is a low rpm (1000-4000) water feed angle grinder. The use of this tool is required when polishing with diamond tools which require the use of water and low RPM's. SECCO has been providing quality tools to concrete and granite fabrication professionals for years. This unit is equipped with an 800 watt 8 amp motor and features a variable speed dial located at the rear of the grinder. The RPM range of this unit is 1000-4000 rpm. The polisher has a quick connect brass coupling and is supplied with all necessary hoses and connectors to hook up a standard garden hose. The arbor is 5/8-11 UNC thread and is compatible with all 5/8 threaded and non threaded tools. At high speed, this is the ideal tool for fast stock removal using diamond grinding wheels, zero tolerance wheels, diamond edge profile wheels, finger bits and diamond hole saws.

Hardin HPG-331-K variable speed 700-3000rpm pipe Polisher 800 Watt includes 36, 60, 120, 180 & 240 grit aluminum oxide sanding belts. The HARDIN pipe sander and polisher is a must have for metal working professionals. From sanding welds on rounded pipes and surfaces to polishing stainless steel railings or marine tube work the HARDIN pipe sander and polisher has you covered. With a 270 degree wrap angle this machine is particularly agile and powerful, ideally suited for finish or repairing pipes and tubes. Constant speed control delivers a smooth and consistent range of speeds even under load and the aluminum design and professional grade construction ensures a long service life.

Achieve professional results when grinding and polishing concrete Counter tops and surfaces with the VSP5. A wet Polisher is the work cornerstone of any polished decorative concrete project and the br VSP5 delivers the power, reliability, and features to make it the choice of the professional concrete artisan.

Hardin WP800-220 4" Variable Speed 220V, 1000-4000 RPM Wet Polisher and Grinder 800 Watt 5/8"x11 Spindle (WVGRIN220). The 4" variable speed wet polisher is a low rpm (1000-4000) water feed angle grinder. The use of this tool is required when polishing with diamond tools which require the use of water and low RPM's. Hardin has been providing quality tools to concrete and granite fabrication professionals for years. This unit is equipped with an 800 watt 8 amp motor and features a variable speed dial located at the rear of the grinder. The RPM range of this unit is 1000-4000 rpm. The polisher has a quick connect brass coupling and is supplied with all necessary hoses and connectors to hook up a standard garden hose. The arbor is 5/8-11 UNC thread and is compatible with all 5/8 threaded and non threaded tools. At high speed, this is the ideal tool for fast stock removal using diamond grinding wheels, zero tolerance wheels, diamond edge profile wheels, finger bits and diamond hole saws.