Hardin Corner Fillet Weld Variable Speed Polisher, 900-2800 RPM 900 Watt (HCP-6200)
Original price was: $170.91.$95.99Current price is: $95.99.
Hardin HD-6200-7 Bearing for HD-6200 / HCP-6200 Corner Fillet Weld Variable Speed Polisher.
Hardin #HD-6200 Specifications
- Zoro #: G204394117
- Mfr #: HD-6200
- Color: Silver
- Country of Origin (subject to change): China
Related Products
Hardin GHCCGRINDPOLSET VS5 Variable Speed Wet Grinder Polisher,Dust Shroud, 4" Diamond Turbo Cup Wheel, 8 pc 5" Diamond Polishing Pad Set.
Hardin WP800-220 4" Variable Speed 220V, 1000-4000 RPM Wet Polisher and Grinder 800 Watt 5/8"x11 Spindle (WVGRIN220). The 4" variable speed wet polisher is a low rpm (1000-4000) water feed angle grinder. The use of this tool is required when polishing with diamond tools which require the use of water and low RPM's. Hardin has been providing quality tools to concrete and granite fabrication professionals for years. This unit is equipped with an 800 watt 8 amp motor and features a variable speed dial located at the rear of the grinder. The RPM range of this unit is 1000-4000 rpm. The polisher has a quick connect brass coupling and is supplied with all necessary hoses and connectors to hook up a standard garden hose. The arbor is 5/8-11 UNC thread and is compatible with all 5/8 threaded and non threaded tools. At high speed, this is the ideal tool for fast stock removal using diamond grinding wheels, zero tolerance wheels, diamond edge profile wheels, finger bits and diamond hole saws.
Hardin HD-5 Dry Variable Speed Constant Power Polisher / Grinder with Backer Pad (BRHD-5BP). Hardin's Polisher-Grinder is a favorite among automotive and marine enthusiasts for polishing, grinding and sanding. It combines 7 AMP power and variable speed control. The result is fast and powerful polishing for clearcoat finishes, and more. It can also be easily converted to a grinder. Variable speed control dial enables user to match the speed to the application. Electronic speed control maintains constant speed under load.
Wet Polisher, Size 4, No Load RPM 1000 to 4500, Amps 8.0 A, Spindle Thread Size 5/8 In.-11, Cord 6 ft, Features 100, 1500, 200, 3000 Grit for Granite and Stone, 4 in Diamond Pads in 7 Grits: 50, 4 in Hook and Loop Backer Pad, 400, 800, Constant Speed Control Water Fed Grinder with Built-In GFCI, Soft Start, Variable Speed, Bearings Sealed, Tool Length 15 in, Handle Design Barrel Grip, Speed Type Variable, Switch Type Slide
The Hardin Dual Vac System supplied with this set confines both dust and water in a controlled environment. While polishing on site, the need to keep water spray from damaging expensive wooden floors and cabinets can be challenging. Concrete dust can also be difficult to clean and is dangerous to breath. With the Dual Vac System, these damaging and toxic materials are contained and removed by simply hooking up your shop vac. To work with the shroud, simply attach the 6 inch DVS shroud to the wet polisher and attach your shop vac to the 1 1/4 inch vacuum adapter
This is our new industrial variable speed wet polisher / grinder. This professional unit is equipped with a 800 watt variable speed motor and features a variable speed dial for optimal control. You can operate from 700-3000 RPM.
The Dust Shroud is designed for use with diamond cup wheels for floor grinding applications. The DS7P is the pro's choice for dust control when using a hand grinder. Fits most grinders and captures airborne particles for outstanding dust control. Preserves air quality, protects workers from harmful silica dust, Hexavalent Chromium and silicosis with the industry's best dustless grinding system. The DS7P installs fast and easy. Insert the appropriate plastic ring adapter that fits the exact collar size of the grinder & tighten the hose clamp on the shroud. Dust cleanup costs time and money and is a safety hazard. Enhance worker safety with DS7P point-of-origin dust control systems for hand grinders. Brush skirt improves performance on textured surfaces. Saves time and money by reducing/eliminating dust cleanup.
Hardin CCGRINDPOLSET220 WP800, 220 Volt 5" Var Speed Polisher, Dust Shroud, 4" Diamond Turbo Cup Wheel, 8 pc 5" Diamond Polishing Pad Set. The Hardin DVS supplied with this set confines both dust and water in a controlled environment. While polishing on site, the need to keep water spray from damaging expensive wooden floors and cabinets can be challenging. Concrete dust can also be difficult to clean and is dangerous to breathe. With the DVS, these damaging and toxic materials are contained and removed by simply hooking up your shop vac. To work with the shroud, simply attach the 6 inch DVS shroud to the wet polisher and attach your shop vac to the 1-1/4 inch vacuum port. After attaching your choice of tooling, set the tool flat and adjust the removable apron to the proper position. The DVS system is compatible with all 4 and 5 inch diamond polishing pads, threaded backer pads, and diamond cup wheels.
The Dust Shroud is designed for use with diamond cup wheels in floor grinding applications. The DC4 shrouds are the pro’s choice for dust control when using a hand grinder. Fits most 4" to 5" grinders and captures airborne particles for outstanding dust control. Preserves air quality, protects workers from harmful silica dust, Hexavalent Chromium and silicosis with the industry's best dustless grinding system. Installs fast and easy. The height is adjustable to accommodate different cutting blades or grinding wheels. Dust cleanup costs time and money and is a safety hazard. Enhance worker safety with this point-of-origin dust control system for hand grinders. Saves time and money by reducing/eliminating dust cleanup. Fits 4" Milwaukee, DeWalt, Metabo, Makita, Hitachi, Bosch & other angle grinders.
The Hardin 4" granite polishing package is the ideal set of tools for polishing granite and stone surfaces. This package includes the Hardin 4" variable speed wet polisher and a complete set of stone diamond polishing pads up to 3000 grit. The Hardin WVGRIN is a low rpm, variable speed (500 – 4500) water feed angle grinder
Dust collection shroud with flush grinding door allows dust collection for flush edge grinding. It features a spring-loaded suspension system that keeps the shroud flush to the surface during movement and compensates for blade wear. The shroud has a removable edge piece for surface work flush to edges or other objects. It also has soft brushes that help contain the dust and allow for smooth movement over the work surface. The outside diameter of the extraction port will work with most standard vacuum hose systems. The dust shroud is ideal for concrete finishing, concrete material removal and paint or surface coating removal.
The 110 volt Hardin1/2 inch radius shaping and polishing profile package is the ideal combination of tools used to produce a 1/2 inch radius decorative edge on tile, granite and concrete counter tops and other natural stone and hard surfaces 1/2 inch in thickness or greater. This kit includes a Hardin 4 inch variable speed wet polisher, 1/2 inch radius vacuum brazed diamond profile wheel and a complete set of 4 inch premium diamond polishing pads. The polishing pad set includes 1 each 50, 100, 200, 400, 800, 1500, and 3000 grit polishing pads. This set also includes the rubber backer pad needed to attach the diamond pads to the polisher. The included 1/2 inch radius vacuum brazed profile wheel is designed to produce a 1/2 inch radius on natural or engineered stone and concrete. Very simple to use, the wheel screws directly on this tool. A guide on the top of the bit rides on the surface of the stone and a lower bearing controls the depth of cut for consistent shaping. The profile wheel is only capable of removing material in the controlled working area, this makes user error or damaging the material virtually impossible.
Reviews
There are no reviews yet.