Heck Industries Tube and Pipe Notcher, Steel
Original price was: $580.00.$94.99Current price is: $94.99.
Tube and Pipe Notcher, Maximum Notch Diameter 2 3/8 in, Maximum Pipe Wall Thickness 0.134 in, Maximum Compatible Pipe Size 2 in, Minimum Compatible Pipe Size 1 1/2 in, Includes Stand No, Mounting Bench Mount, Wall Mount
Heck Industries #WFN3 Specifications
- Zoro #: G6226866
- Mfr #: WFN3
- Item: Tube and Pipe Notcher
- Size (In.): 1 1/2 in, 2 in, 2 3/8 Tube, 2 Pipe
- Cutting Capacity (In.): 40 in
- Cutting Width (In.): 1 1/2 in, 2 in, 2 3/8 Tube, 2 Pipe
- Material: Steel
- Application: Notching
- Function: Fastest Way to Produce 90 Degrees Notches for Handrail, Fences, Frames, Gates and Furniture
- Body Color: Gray
- Maximum Pipe Wall Thickness: 0.134 in
- Body Material: Steel
- Includes Stand: No
- Maximum Notch Diameter: 2 3/8 in
- Mounting: Bench Mount, Wall Mount
- Features: Brackets for Wall or Bench Mounting, Creates 90 Degrees Notches, Small and Portable
- Minimum Compatible Pipe Size: 1 1/2 in
- Ram Type: Manual
- Maximum Compatible Pipe Size: 2 in
- For Pipe Size Range: 1 1/2 in to 2 in
- Country of Origin (subject to change): China
Related Products
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Engraving Pen, General, 32,400 Blows per Minute, 1.7 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 1/4 in Min. Hose Size, Overall Length 5 4/5 in, Hose Length 79 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
Oscillating Blade, Material High Carbon Steel, Size 1-1/4 in, Overall Length 4 in, Application Cardboard, Cutting Carpet, Shingles, For Use With All Oscillating Tools
Makita Cb-303 Carbon Brush Set Cb-303, Fits Brand Makita
Makita Carbon Brush Set Cb-440, Fits Brand Makita
Oscillating Blades, Material Bi-Metal, Size 1-3/16 in, Overall Length 3 51/64 in, Application Drywall, Plastic, Plunge, Wood, For Use With 2426-20, 2426-21, 2426-22, 2426-22 48-11-2420, 24A483, 2626-20, AFSC 18, EET4-910-16, FMM 350Q, FMM 350Q TOP, FSC 1.6, FSC 1.6Q, Mfr. No. FMT 250Q, TM3010CX1, XMT03Z, Package Quantity 10
Planer, Voltage 230, 2 Speed, Motor HP 5 hp, 23 Amps, Cutting Width (In.) 20 in, Cutting Thickness (In.) 8 in, Depth of Cut (In.) 3/32 in, Cuts per Minute 20,000, Feed Rates (FPM) 24/31, No Load RPM 5,000 RPM, Helical Cutter Head, Motor Phase 1, Two Speed Gearbox, Cast Iron, Overall Depth (In.) 44 in, Overall Height (In.) 23 in, Overall Width (In.) 28 in
Engraving Pen, Industrial, 13,500 Blows per Minute, 1.1 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 3/16 in Min. Hose Size, Overall Length 5 in, Hose Length 96 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
Electric Engraver, 1.0 Amps @ 120V, On/Off Switch, For Use With All Rotary Tool Accessories, Engraves Most Surfaces, Grinds and Buffs, Dial Variable Speed Control, No Soft Grip, Tool Length 9 in, Tool Weight 2 lb, Includes (2) HSS Bits
This Milwaukee Quik-Lok® cord is a three wire grounded 8 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Reviews
There are no reviews yet.