Jet Floor Drill Press, Belt Drive, 1 hp, 115/230 V, 16 7/8 in Swing, 12 Speed
Original price was: $576.00.$94.99Current price is: $94.99.
Floor Drill Press, Primary Material Application Metal, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Drilling, Speed Control Fixed, Speed Adjustment Step Pulley, Swing 16 7/8 in, Spindle-to-Column Distance 8 3/8 in, Horsepower 1 hp, Voltage 115/230V AC, Spindle Taper 2MT, Number of Speeds 16, Chuck Size 5/8 in, Chuck Style Keyed, Guard Included Yes, Coolant System No, Quill Diameter 2 1/16 in, Drilling Capacity in Steel 5/8 in
Jet #IDP-17 Specifications
- Zoro #: G4841691
- Mfr #: IDP-17
- Drill Press Product Grouping: General Purpose Drill Presses
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 16 7/8 in
- Voltage: 115/230
- Motor HP: 1 hp
- Chuck Size: 5/8 in
- Number of Speeds: 16
- Capacity Steel: 5/8 in
- Spindle Speed: 350 to 2800 rpm
- Max. Spindle To Base: 50 in
- Spindle Taper: 2MT
- Table Slot Size: 1/2 in x 1 in
- Hz: 60
- Phase: 1
- Overall Depth: 27 1/2 in
- Corded/Banded: Corded
- Overall Height: 63 in
- Amps AC: 8.9
- Spindle Travel: 3 5/16 in
- Capacity Cast Iron: 3/4 in
- Spindle to Table: 30 1/2 in
- Column Dia.: 3 1/8 in
- Number of T-Slots: 2
- Base Size: 21-3/4 in x 13-3/4 in x 2-3/16 in
- Table Work Surface: 14 in x 14 in
- Corded/Cordless: Corded
- Power Down Feed Included: No
- Overall Width: 16 3/4 in
- Quill Dia.: 2 1/16 in
- Tilting Angle: 45 Degrees
- Includes: Arbor, Chuck with Key, Drift Key, Hex Wrenches, Wrench
- Motor Voltage: 115/230V AC ; Single-Phase
- Guard Included: Yes
- Column Diameter: 3 1/8 in
- Drilling Capacity in Stainless Steel: 5/8 in
- Table Slot: Yes
- Tapping Compatible: No
- Power Source: Corded
- Current: 9 A
- Spindle-to-Column Distance: 8 3/8 in
- Primary Material Application: Metal
- Chuck Capacity: 5/8 in
- Table Shape: Square
- Number of Spindle Speeds: 16
- Drill Press Type: Floor Stand
- Chuck Style: Keyed
- Minimum Spindle Speed: 350 RPM
- Table Length: 14 in
- Drill Press Application: Drilling
- Base Width: 13 3/4 in
- Base Length: 21 3/4 in
- Speed Range: 350 to 2,800 RPM
- Spindle Speed Range: 350 RPM – 2,800 RPM
- Maximum Spindle-to-Table Height: 30 1/2 in
- Speed Control: Fixed
- Drilling Capacity in Steel: 5/8 in
- Speed Adjustment: Step Pulley
- Overall Length: 27 1/2 in
- Table Slot Width: 1/2 in
- Maximum Overall Height: 63 in
- Table Tilt: 45 Degrees
- Quill Diameter: 2 1/16 in
- Drilling Capacity in Cast Iron: 3/4 in
- Horsepower: 1 hp
- Coolant System: No
- Drill Spindle Travel: 3 in – 4 in
- Table Width: 14 in
- Maximum Spindle-to-Base Height: 50 in
- Base Height: 2 1/4 in
- Standards: CSA Certified
- Maximum Spindle Speed: 2,800 RPM
- Nominal Voltage: 115/230V AC
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Lathe, Distance Between Centers 40 in, Voltage 230, Horsepower 2, Min. Spindle Speed 60 RPM, Overall Height 29 in, Overall Length 75-1/2 in, Overall Width 29 3/4 in, Max. Spindle Speed 1,240 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
Planer, Voltage 230, 2 Speed, Motor HP 5 hp, 23 Amps, Cutting Width (In.) 20 in, Cutting Thickness (In.) 8 in, Depth of Cut (In.) 3/32 in, Cuts per Minute 20,000, Feed Rates (FPM) 24/31, No Load RPM 5,000 RPM, Helical Cutter Head, Motor Phase 1, Two Speed Gearbox, Cast Iron, Overall Depth (In.) 44 in, Overall Height (In.) 23 in, Overall Width (In.) 28 in
Dust Collector, Canister, Max. Flow (CFM) 1,100 cfm, Min. Air Flow (CFM) 0 cfm, Operating Velocity Range (FPM) 8,464 fpm, Static Pressure Range (In.) 10.5, 1 1/2 hp HP, 115/230V AC Voltage, 60 Hz Hz, Single, 11 to 5.5 A Amps AC, Chip Capacity (Microns) 32 micron, Height (In.) 79 in, Width (In.) 22 1/2 in, Depth (In.) 37 in, Overall Height (In.) 79 in, Overall Width (In.) 22 1/2 in, Overall Depth (In.) 37 in, Max. Hose Length (Ft.) 5.83 ft, Hose Dia. (In.) 6 in, 70 to 80 dBA dBA
Shear/Brake/Roll, Bending Length (In.) 30 in, Cutting Width (In.) 30 in, Rolls 3, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 2 in, 3 in, 6 in, 8 in, 10 in, 6 a 1, Max. Box Depth (In.) 4 in, Cast Iron, Die 1, 10 in, 2, 3, 6, 8
Collection Bags, Dust Extraction, Filter Rating (Microns) 2, Length (Ft.) 3-11/16, Overall Height (In.) 47-1/4, Overall Dia. (In.) 38-9/16, For Use With Mfr. No. JCDC-3, Includes 5 Bags, Package Quantity 5
CFM Dust Collector,1HP
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 14 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Sheet Metal Brake, Brake Type Box and Pan, Actuation Foot Pedal, Sheet Capacity Aluminum 14 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Finger Style Top and Bottom Edge, Finger Width 1 in, 1 1/8 in, 1 3/8 in, 1 1/2 in, 1 3/4 in, 2 in, 3 in, 4 in, 6 in, 7 3/4 in, 10 in, 10 5/8 in
Dust Collector, Two Filter System, Max. Flow (CFM) 1,700 cfm, Min. Air Flow (CFM) 800 cfm, Static Pressure Range (In.) 0.12 to 0.32, 1/3 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 7.7 A Amps AC, Overall Height (In.) 20 9/32 in, Overall Width (In.) 24 in, Overall Depth (In.) 36 11/16 in, 60 to 75 dBA dBA, 10 micron Filter Bag, Cord Length 6 ft, Cord Type SJT 5-15P, Includes Holder, CFM at Max. S.P. 1,372 cfm
Dust Collector, Cyclone, Max. Flow (CFM) 1,538 cfm, Min. Air Flow (CFM) 938 cfm, Operating Velocity Range (FPM) 7,813 fpm, Static Pressure Range (In.) 3.8, 2 hp HP, 230V AC Voltage, 60 Hz Hz, Single, 9 A Amps AC, Chip Capacity (Microns) 1 micron, Drum Capacity (Gal.) 30 gal, Height (In.) 22 1/4 in, Width (In.) 50 5/8 in, Depth (In.) 22 1/4 in, Overall Height (In.) 72 1/4 in, Overall Width (In.) 50 5/8 in, Overall Depth (In.) 25 in, Hose Dia. (In.) 6 in, 76 dBA dBA, Drum Dia. (In.) 19 11/16 in
Lathe, Distance Between Centers 20 1/2 in, Voltage 115, Horsepower 1, Min. Spindle Speed 60 RPM, Overall Height 17 7/8 in, Overall Length 33-3/4 in, Overall Width 11 in, Max. Spindle Speed 3,600 RPM, Tailstock Taper MT2
Slip Roll, Max. Forming Width (In.) 50 in, Max. Capacity 16 ga, Dia. of Rolls (In.) 3 in, Min. Radius (In.) 2 in, Electrical Power
Reviews
There are no reviews yet.