Jet Floor Drill Press, Belt Drive, 2 hp, 230/460 V, 20 in Swing, Variable Speed
Original price was: $445.00.$93.99Current price is: $93.99.
Production Drill Presses, Floor Drill Press, Drive Type Belt, Swing 20 in, Spindle Taper 3MT, Motor HP 2 hp, Capacity Steel 1 in, Capacity Cast Iron 1 1/4 in, Drilling Capacity Wood Not Specified, Includes Crank Handle, Drift Key, Socket Wrench, Power Down Feed Included No, Voltage 230/460, Amps AC 7.0/3.5, Number of Speeds Variable, Chuck Size Not Included, Spindle Speed 300 to 2000 rpm, Spindle Travel 6 in, Base Size 27 in x 19 in, Table Work Surface 22 in x 18-1/2 in, Hz 60, Phase 3
Jet #JDP-20VS-3 Specifications
- Zoro #: G7685907
- Mfr #: JDP-20VS-3
- Drill Press Product Grouping: Production Drill Presses
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 20 in
- Voltage: 230/460
- Motor HP: 2 hp
- Chuck Size: Not Included
- Number of Speeds: Variable
- Capacity Steel: 1 in
- Spindle Speed: 300 to 2000 rpm
- Spindle Travel: 6 in
- Corded/Cordless: Corded
- Quill Dia.: 3 in
- Power Down Feed Included: No
- Table Work Surface: 22 in x 18-1/2 in
- Corded/Banded: Corded
- Phase: 3
- Overall Height: 79 35/64 in
- Capacity Cast Iron: 1 1/4 in
- Includes: Crank Handle, Drift Key, Socket Wrench
- Overall Depth: 38 3/16 in
- Overall Width: 27 5/32 in
- Amps AC: 7.0/3.5
- Max. Spindle To Base: 43 1/2 in
- Table Slot Size: 5/8 in
- Spindle to Table: 30 1/4 in
- Drilling Capacity Wood: Not Specified
- Number of T-Slots: 3
- Base Size: 27 in x 19 in
- Hz: 60
- Column Dia.: 4 1/2 in
- Spindle Taper: 3MT
- Maximum Spindle-to-Table Height: 30 1/4 in
- Coolant System: No
- Number of Spindle Speeds: Variable
- Minimum Spindle Speed: 300 RPM
- Table Slot: Yes
- Drill Press Application: Drilling
- Speed Adjustment: Mechanical Variable Speed Drive System
- Radial Arm: No
- Horsepower: 2 hp
- Primary Material Application: Metal
- Quill Diameter: 2 61/64 in
- Table Shape: Rectangular
- Table Load Capacity: 154 lb
- Base Length: 27 in
- Maximum Overall Height: 79 1/2 in
- Spindle Speed Range: 300 RPM – 2,000 RPM
- Power Source: Corded
- Table Width: 18 3/4 in
- Current: 7/3.5 A
- Speed Control: Variable
- Overall Length: 38 1/8 in
- Chuck Style: Keyed
- Speed Range: 300 to 2,000 RPM
- Drill Spindle Travel: 6 in – 7 in
- Drilling Capacity in Steel: 1 3/8 in
- Table Slot Width: 5/8 in
- Guard Included: Yes
- Tapping Compatible: Yes
- Maximum Spindle Speed: 2,000 RPM
- Table Length: 22 in
- Drilling Capacity in Stainless Steel: 3/4 in
- Base Width: 19 in
- Spindle-to-Column Distance: 10 7/16 in
- Standards: CSA Certified, CUS Certified
- Maximum Spindle-to-Base Height: 44 1/2 in
- Drilling Capacity in Cast Iron: 1 1/2 in
- Motor Voltage: 230/460V AC ; Three-Phase
- Drill Press Type: Floor Stand
- Drilling Capacity in Wood: 1 1/4 in
- Column Diameter: 4 1/2 in
- Nominal Voltage: 230/460V AC
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Slip Roll, Max. Forming Width (In.) 24 in, Max. Capacity 20 ga, Dia. of Rolls (In.) 2 in, Min. Radius (In.) 1 in
Lathe, Distance Between Centers 20 1/2 in, Voltage 115, Horsepower 1, Min. Spindle Speed 60 RPM, Overall Height 17 7/8 in, Overall Length 33-3/4 in, Overall Width 11 in, Max. Spindle Speed 3,600 RPM, Tailstock Taper MT2
Dust Collector, Bag-Style Filter, Max. Flow (CFM) 1,100 cfm, Min. Air Flow (CFM) 0 cfm, Operating Velocity Range (FPM) 8,464 fpm, Static Pressure Range (In.) 10.5, 1 1/2 hp HP, 115/230V AC Voltage, 60 Hz Hz, Single, 11 to 5.5 A Amps AC, Chip Capacity (Microns) 32 micron, Height (In.) 79 in, Width (In.) 22 1/2 in, Depth (In.) 37 in, Overall Height (In.) 79 in, Overall Width (In.) 22 1/2 in, Overall Depth (In.) 37 in, Max. Hose Length (Ft.) 5.83 ft, Hose Dia. (In.) 6 in, 70 to 80 dBA dBA
Sheet Metal Brake, Brake Type Box and Pan, Actuation Hand Lever, Sheet Capacity Aluminum 14 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Finger Style Top Edge, Finger Width 2 in, 3 in, 4 in
Dust Collector, Max. Flow (CFM) 490, Operating Velocity Range (FPM) 5,610, 1 1/2 hp HP, 115/230 Voltage, 1, 15 to 7.5 Amps AC, Hose Dia. (In.) 3 in, 75 dBA, Includes 19TH39
Bench Oscillating Sander,7.5 A, 1/2 HP, Voltage 110, 7.5 Amps AC, 60 Hz, 30 Strokes per Minute, Table Work Surface (In.) 14-1/2×14-1/2, Overall Width (In.) 11-3/4, Overall Height (In.) 18-3/4, Table Material Cast Iron/Metal, Includes (4) Non to Skid Rubber Feet and 1/4 in., 1/2 in., 5/8 in., 1 to 1/2 in., 2 in. Spindle Assemblies with 100 Grit Paper
Dust Collector, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 8,464, Static Pressure Range (In.) 10-1/2, 1 1/2 hp HP, 115/230 Voltage, 1, 11 to 5.5 Amps AC, Height (In.) 39 in, Width (In.) 22 1/2 in, Depth (In.) 37 in, Overall Height (In.) 72 in, Overall Width (In.) 22 1/2 in, Overall Depth (In.) 37 in, Hose Dia. (In.) 6 in, 75 to 80 dBA, 2 Filter Bag, Impeller Dia. (In.) 11 in, Includes (4) Casters
Planer, Voltage 230, 2 Speed, Motor HP 5 hp, 23 Amps, Cutting Width (In.) 20 in, Cutting Thickness (In.) 8 in, Depth of Cut (In.) 3/32 in, Cuts per Minute 20,000, Feed Rates (FPM) 24/31, No Load RPM 5,000 RPM, Helical Cutter Head, Motor Phase 1, Two Speed Gearbox, Cast Iron, Overall Depth (In.) 44 in, Overall Height (In.) 23 in, Overall Width (In.) 28 in
Lathe, Distance Between Centers 43 in, Voltage 230, Horsepower 2, Min. Spindle Speed 70 RPM, Overall Height 28 1/2 in, Overall Length 79 in, Overall Width 30 in, Max. Spindle Speed 2,000 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
Jointer, Jointing Capacity (In.) 12 in, Rabbeting Capacity (In.) 1/2 in, Depth of Cut (In.) 1/8 in, HP 3 hp, 60 Hz, Table Length (In.) 55 in, Table Width (In.) 12 in, Tilting Angle (Deg.) 90 to 45R, No Load RPM 5,500 RPM, Cast Iron, Features Helical Cutter Head, Overall Height (In.) 40 in, Overall Width (In.) 34 in, Overall Length (In.) 55 in, Tool Weight (Lb.) 500
Collection Bags, Overall Height (In.) 2, Overall Dia. (In.) 20, Overall Width (In.) 9-1/4, Overall Depth (In.) 11, For Use With Jet Dust Collector, Package Quantity 5
Lathe, Distance Between Centers 40 in, Voltage 230, Horsepower 2, Min. Spindle Speed 60 RPM, Overall Height 29 in, Overall Length 75-1/2 in, Overall Width 29 3/4 in, Max. Spindle Speed 1,240 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
Reviews
There are no reviews yet.