Jet Lathe, 230 Volts, 2 HP, 1 Phase
Original price was: $481.00.$92.99Current price is: $92.99.
Lathe, Distance Between Centers 40 in, Voltage 230V AC, Horsepower 2 hp, Min. Spindle Speed 70 RPM, Application Wood Turning, Overall Height 71 in, Overall Length 75 in, Overall Width 32 in, Max. Spindle Speed 2,000 RPM, Tailstock Taper MT4, Spindle Nose Type D1-4 Camlock
Jet #321101AK Specifications
- Zoro #: G9866911
- Mfr #: 321101AK
- Item: Lathe
- Motor HP: 2
- Phase: Single
- Voltage: 230V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 13
- Horsepower: 2 hp
- Spindle Bore (In.): 1-3/8
- Number of Threads (mm): 27
- Spindle Taper: 5 MT (3MT)
- Bed Width (In.): 7-3/8
- Cross Feed Rates: 0.0012″ to 0.0345″
- Overall Width: 32 in
- Distance Between Centers (In.): 43
- Tailstock Taper: MT4
- Features: One of the Most Popular Jet Lathes Now Comes with an Enclosed Gear Box. Enclosed Gear Box Design Provides Smooth, Quiet Operation. Fast, Easy Speed Changes. Hardened and Ground Gears are Featured in the Headstock and Gearbox. D1-4 Spindle is Precision Ground for Accuracy and Supported by High Quality Tapered Roller Bearings. Headstock is Constantly Oiled During Operation. Gear Box Gives Wide Inch Threading and Feed Capabilities with No Gear Changes. V-Way Bed Design is Induction Hardened and Ground. Gap Bed Section Provided for Larger Diameter Work. Independent Leadscrew and Feed Rod.
- Hz: 60
- Compound Travel (In.): 2-11/16
- Swing Over Cross Slide (In.): 7-25/32
- Number of Threads (In.): 40
- Includes: Taper Attachment
- Swing In Gap (In.): 18-3/4
- Spindle Speed (RPM): 70 to 2000
- Cross Travel (In.): 6-5/16
- Thread Range (In.): 4 to 112
- Overall Length: 75 in
- Thread Range (mm): 0.2 to 6
- Tailstock Travel (In.): 3-3/4
- Number of Spindle Speeds: 8
- Gap Length (In.): 8
- Carriage Travel (In.): 35
- Coolant Tank Capacity: 3 gal
- Overall Height: 71 in
- Longitudinal Feed Rates: 0.0018 to 0.0374
- Max. Metric Thread: 10 mm
- Gap Length: 8 in
- Swing Over Bed: 13 in
- Max. Threads per Inch: 80
- Max. Spindle Speed: 2,000 RPM
- Distance Between Centers: 40 in
- Bed Width: 8 in
- Max. Cross Feed: 0.0130 in
- Spindle Nose Type: D1-4 Camlock
- Number of Inch Threads: 38
- Swing In Gap: 18 3/4 in
- Min. Metric Thread: 0.45 mm
- Min. Spindle Speed: 70 RPM
- Min. Cross Feed: 0.0006 in
- Spindle Bore: 1 3/8 in
- Min. Threads per Inch: 3 1/2
- Swing Over Cross Slide: 7 25/32
- Spindle Dia.: 1 1/4 in
- Number of Metric Threads: 23
- Application: Wood Turning
- Sound Level: 88 dB
- Country of Origin (subject to change): China
Related Products
Bench Oscillating Sander,7.5 A, 1/2 HP, Voltage 110, 7.5 Amps AC, 60 Hz, 30 Strokes per Minute, Table Work Surface (In.) 14-1/2×14-1/2, Overall Width (In.) 11-3/4, Overall Height (In.) 18-3/4, Table Material Cast Iron/Metal, Includes (4) Non to Skid Rubber Feet and 1/4 in., 1/2 in., 5/8 in., 1 to 1/2 in., 2 in. Spindle Assemblies with 100 Grit Paper
Dust Collector, Cyclone, Max. Flow (CFM) 1,538 cfm, Min. Air Flow (CFM) 938 cfm, Operating Velocity Range (FPM) 7,813 fpm, Static Pressure Range (In.) 3.8, 2 hp HP, 230V AC Voltage, 60 Hz Hz, Single, 9 A Amps AC, Chip Capacity (Microns) 1 micron, Drum Capacity (Gal.) 30 gal, Height (In.) 22 1/4 in, Width (In.) 50 5/8 in, Depth (In.) 22 1/4 in, Overall Height (In.) 72 1/4 in, Overall Width (In.) 50 5/8 in, Overall Depth (In.) 25 in, Hose Dia. (In.) 6 in, 76 dBA dBA, Drum Dia. (In.) 19 11/16 in
Dust Collector, Two Filter System, Max. Flow (CFM) 3,367 cfm, Min. Air Flow (CFM) 1,654 cfm, Static Pressure Range (In.) 0.28 to 0.64, 1 hp HP, 230V AC Voltage, 60 Hz Hz, Single, 6.0/4.0/3.5 A Amps AC, Overall Height (In.) 23 3/8 in, Overall Width (In.) 27 3/4 in, Overall Depth (In.) 41 13/16 in, 69 to 75 dBA dBA, 10 micron Filter Bag, Cord Length 6 ft, Cord Type SJT 6-15P, Includes Holder, CFM at Max. S.P. 3,367 cfm
CFM Dust Collector,1HP
Slip Roll, Max. Forming Width (In.) 24 in, Max. Capacity 20 ga, Dia. of Rolls (In.) 2 in, Min. Radius (In.) 1 in
Jointer, Jointing Capacity (In.) 0.5 in, Rabbeting Capacity (In.) 1/2 in, Depth of Cut (In.) 1/8 in, HP 2 hp, Voltage 230, 12 A Amps, 60 Hz, Table Length (In.) 72 in, Table Width (In.) 9 in, No Load RPM 5,500 RPM, Head Straight Knife, Steel, Features Easy to Reach Locks, Extra Long, Heavy-Duty Cast Iron Infeed and Outfeed Tables, Large Handwheels, Rigid Fence, Overall Height (In.) 18 1/2 in, Overall Width (In.) 25 13/64 in, Overall Length (In.) 74 in, Tool Weight (Lb.) 452
Lathe, Distance Between Centers 40 in, Voltage 230, Horsepower 2, Min. Spindle Speed 60 RPM, Overall Height 29 in, Overall Length 75-1/2 in, Overall Width 29 3/4 in, Max. Spindle Speed 1,240 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
Planer, Voltage 230, 2 Speed, Motor HP 5 hp, 23 Amps, Cutting Width (In.) 20 in, Cutting Thickness (In.) 8 in, Depth of Cut (In.) 3/32 in, Cuts per Minute 20,000, Feed Rates (FPM) 24/31, No Load RPM 5,000 RPM, Helical Cutter Head, Motor Phase 1, Two Speed Gearbox, Cast Iron, Overall Depth (In.) 44 in, Overall Height (In.) 23 in, Overall Width (In.) 28 in
Collection Bags, Dust Extraction, Filter Rating (Microns) 2, Length (Ft.) 3-11/16, Overall Height (In.) 47-1/4, Overall Dia. (In.) 38-9/16, For Use With Mfr. No. JCDC-3, Includes 5 Bags, Package Quantity 5
Dust Collector, Two Filter System, Max. Flow (CFM) 1,700 cfm, Min. Air Flow (CFM) 800 cfm, Static Pressure Range (In.) 0.12 to 0.32, 1/3 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 7.7 A Amps AC, Overall Height (In.) 20 9/32 in, Overall Width (In.) 24 in, Overall Depth (In.) 36 11/16 in, 60 to 75 dBA dBA, 10 micron Filter Bag, Cord Length 6 ft, Cord Type SJT 5-15P, Includes Holder, CFM at Max. S.P. 1,372 cfm
Helical Head Benchtop Jointer
Jointer, Jointing Capacity (In.) 12 in, Rabbeting Capacity (In.) 1/2 in, Depth of Cut (In.) 1/8 in, HP 3 hp, 60 Hz, Table Length (In.) 55 in, Table Width (In.) 12 in, Tilting Angle (Deg.) 90 to 45R, No Load RPM 5,500 RPM, Cast Iron, Features Helical Cutter Head, Overall Height (In.) 40 in, Overall Width (In.) 34 in, Overall Length (In.) 55 in, Tool Weight (Lb.) 500
Reviews
There are no reviews yet.