Jet Milling Machine, 3 HP, 3 PH, 230/460 V
Original price was: $422.00.$95.99Current price is: $95.99.
Knee/Column Milling Machine, Table Length 9 in, Table Width 49 in, 3, Table Load Capacity 660 lb, Phase 3, Voltage 230/460V, Longitudinal Travel 28-3/4 in, Cross Travel 12 in, Min. Spindle Speed 60 RPM, Max. Spindle Speed 4,200 RPM
Jet #690183 Specifications
- Zoro #: G9879073
- Mfr #: 690183
- Voltage: 230/460V
- Item: Knee/Column Milling Machine
- Motor HP: 3
- Phase: 3
- Longitudinal Travel: 28-3/4 in
- Cross Travel: 12 in
- Longitudinal Travel (In.): 28.75
- Cross Travel (In.): 12
- Hz: 60
- Spindle Taper: R-8
- Includes: One Shot Lubrication System, Locks On All Moveable Surfaces, Precision Hardened and Ground Way and Table, Way Covers, R8 Drawbar, Tool Box with Tools
- T-Slot Size (In.): 3,5/8
- Features: Mechanize Casting, Precision Bored and Honed Milling Head, Large Diameter Quill is Chromed, High Precision Class 7 Spindle Bearings, Spindle Head is Internally Cooled, Satin Chrome Finished Dials, Heavy duty Splined Motor Drive, One Piece Quill Pinion and Shaft, Three Stage Power Down Feed with Automatic Stop, Three Stage Power Down Feed with Automatic Stop, Heavy Duty Spindle Brake, Precision Hardened and Ground Ways, Precision Ground Table, Adjustable Gibbs Throughout, X-Axis Powerfeed, Internal Coolant Tank Built Into Base for Use with Coolant System (coolant Pump Not Included)
- Overall Height: 85 in
- Number of T-Slots: 3
- Quill Dia.: 3 3/8 in
- Overall Depth: 63 in
- Right-Hand Head Tilt: 90 Degrees
- Min. Spindle to Column Distance: 4-1/2 in
- Table Length: 9 in
- Horsepower: 3
- Max. Spindle Speed: 4,200 RPM
- Ram Travel Length: 13-3/8 in
- Spindle Taper Size: R-8
- Overall Length: 66 in
- Forward Head Tilt: 45 Degrees
- Table Load Capacity: 660 lb
- Max. Spindle To Column Distance: 19 in
- Number of Spindle Speeds: Variable
- Min. Spindle Speed: 60 RPM
- Table Width: 49 in
- Max. Spindle to Table Distance: 17 1/2 in
- Backward Head Tilt Adjustment: 45 Degrees
- Left-Hand Head Tilt: 90 Degrees
- Spindle Travel Length: 5 in
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Dust Collector, Two Filter System, Max. Flow (CFM) 2,097 cfm, Min. Air Flow (CFM) 1,168 cfm, Static Pressure Range (In.) 0.41 to 0.85, 3/4 hp HP, 115V AC Voltage, 60 Hz Hz, Single, 8.5 A Amps AC, Overall Height (In.) 20 9/32 in, Overall Width (In.) 24 in, Overall Depth (In.) 36 11/16 in, 66 to 71 dBA dBA, 10 micron Filter Bag, Cord Length 6 ft, Cord Type SJT 5-15P, Includes Holder, CFM at Max. S.P. 1,400 cfm
Slip Roll, Max. Forming Width (In.) 50 in, Max. Capacity 16 ga, Dia. of Rolls (In.) 3 in, Min. Radius (In.) 2 in, Electrical Power
Box & Pan Brake Foot Clamp, Bending Length (In.) 50 in, Capacity of Mild Steel (Gauge) 14, Finger Width (In.) 1 1/8 in, 1 3/8 in, 1 1/2 in, 1 3/4 in, 2 in, 3 in, 4 in, 6 in, 7 3/4 in, 10 5/8 in, Max. Box Depth (In.) 2 1/2 in, Max. Lift of Beam (In.) 1 7/8 in
Lathe, Distance Between Centers 43 in, Voltage 230, Horsepower 2, Min. Spindle Speed 70 RPM, Overall Height 28 1/2 in, Overall Length 79 in, Overall Width 30 in, Max. Spindle Speed 2,000 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
Dust Collector, Max. Flow (CFM) 1,100, Operating Velocity Range (FPM) 8,464, Static Pressure Range (In.) 10-1/2, 1 1/2 hp HP, 115/230 Voltage, 1, 11 to 5.5 Amps AC, Height (In.) 39 in, Width (In.) 22 1/2 in, Depth (In.) 37 in, Overall Height (In.) 72 in, Overall Width (In.) 22 1/2 in, Overall Depth (In.) 37 in, Hose Dia. (In.) 6 in, 75 to 80 dBA, 2 Filter Bag, Impeller Dia. (In.) 11 in, Includes (4) Casters
Dust Collector, Cyclone, Max. Flow (CFM) 938, Min. Air Flow (CFM) 938, Operating Velocity Range (FPM) 4,763, Static Pressure Range (In.) 2.7, 2 hp HP, 230 Voltage, 60 Hz, 1, 15 Amps AC, Chip Capacity (Microns) 2, Height (In.) 41 3/8 in, Width (In.) 26 9/16 in, Depth (In.) 26 in, Overall Height (In.) 41 3/8 in, Overall Width (In.) 26 9/16 in, Overall Depth (In.) 45 in, Hose Dia. (In.) 4 in, 76 dBA, Drum Dia. (In.) 30-11/16, 2 micron Filter Bag, Impeller Dia. (In.) 14 1/2 in, Cord Length 10 ft
Sheet Metal Brake, Brake Type Box and Pan, Actuation Foot Pedal, Sheet Capacity Aluminum 14 ga, Sheet Metal Capacity Mild Steel 16 ga, Sheet Metal Capacity Stainless Steel 22 ga, Maximum Bend Angle 135 Degrees , Finger Style Top and Bottom Edge, Finger Width 1 in, 1 1/8 in, 1 3/8 in, 1 1/2 in, 1 3/4 in, 2 in, 3 in, 4 in, 6 in, 7 3/4 in, 10 in, 10 5/8 in
Bench Oscillating Sander,7.5 A, 1/2 HP, Voltage 110, 7.5 Amps AC, 60 Hz, 30 Strokes per Minute, Table Work Surface (In.) 14-1/2×14-1/2, Overall Width (In.) 11-3/4, Overall Height (In.) 18-3/4, Table Material Cast Iron/Metal, Includes (4) Non to Skid Rubber Feet and 1/4 in., 1/2 in., 5/8 in., 1 to 1/2 in., 2 in. Spindle Assemblies with 100 Grit Paper
Shear/Brake/Roll, Bending Length (In.) 30 in, Cutting Width (In.) 30 in, Rolls 3, Capacity of Mild Steel (Gauge) 20, Finger Width (In.) 2 in, 3 in, 6 in, 8 in, 10 in, 6 a 1, Max. Box Depth (In.) 4 in, Cast Iron, Die 1, 10 in, 2, 3, 6, 8
Slip Roll, Max. Forming Width (In.) 24 in, Max. Capacity 20 ga, Dia. of Rolls (In.) 2 in, Min. Radius (In.) 1 in
Collection Bags, Dust Extraction, Filter Rating (Microns) 2, Length (Ft.) 2-1/4, Overall Height (In.) 27-9/16, Overall Dia. (In.) 26, For Use With Mfr. No. JCDC-1.5, Includes 5 Bags, Package Quantity 5
Dust Collector, Two Filter System, Max. Flow (CFM) 3,367 cfm, Min. Air Flow (CFM) 1,654 cfm, Static Pressure Range (In.) 0.28 to 0.64, 1 hp HP, 230V AC Voltage, 60 Hz Hz, Single, 6.0/4.0/3.5 A Amps AC, Overall Height (In.) 23 3/8 in, Overall Width (In.) 27 3/4 in, Overall Depth (In.) 41 13/16 in, 69 to 75 dBA dBA, 10 micron Filter Bag, Cord Length 6 ft, Cord Type SJT 6-15P, Includes Holder, CFM at Max. S.P. 3,367 cfm
Reviews
There are no reviews yet.