Milwaukee Diamond Coring Rig w/Small Base Stand, Vac-U-Rig Kit, Meter Box
Original price was: $547.00.$92.99Current price is: $92.99.
This contractor series small base stand features a cast aluminum base with 4 leveling screws for fast accurate leveling adjustment. The durable precision-ground 2-1/2 in. steel column is 43-1/2 in. high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side. Model 4115-22 comes with model 4096 coring motor, Vac-U-Rig® kit as well as a meter box. The Vac-U-Rig® assembly uses a vacuum pump to apply suction to a large pad mounted on the bottom of the rig. This aids in stability when coring holes.
Milwaukee #4115-22 Specifications
- Zoro #: G4937572
- Mfr #: 4115-22
- Promotion Restriction: Not eligible for promotion
- Item: Diamond Coring Rig
- Motor HP: 4 4/5 hp
- Amps: 20.0 A
- No Load RPM: 450/900
- Core Bit Cap Concrete: 10 in
- Overall Height: 43 1/2 in
- Corded/Cordless: Corded
- Column Dia.: 2-1/2 in x 2-1/2 in
- Column Height: 43 1/2 in
- Corded/Banded: Corded
- Voltage: 120V AC
- Tool Weight: 111.5 lb
- Includes: 4096 Diamond Coring Rig Motor, Meter Box, Small Base Stand, Vac-u-rig Kit
- Features: 1-1/4 in -7 Spindle, Rear Mounted Rack And Pinion Feed, Small Cast Aluminum Base With Four Leveling Screws
- Minimum Spindle Speed: 450 RPM
- Relative Base Size: Small
- Spindle Decimal Equivalent Screw Size: 1.25 in
- Angle-to-Surface: 90 Degrees
- Power Source: Corded
- Overload Protection Clutch: Yes
- Plug Type: L5-20P
- Adjustable Angle: No
- Current: 20 A
- Maximum Spindle Speed: 900 RPM
- Spindle Thread Size: 1 1/4″-7
- Anti-Kickback Clutch Type: Mechanical
- Horsepower: 4.8 hp
- Application: Drilling with Stability
- Nominal Voltage: 115V AC
- Series: Contractor
- Coring Capacity in Concrete: 10 in
- Reversible: Yes
- Minimum Core Bit Compatibility: 2 in
- Maximum Core Bit Compatibility: 10 in
- Column Diameter: 2 1/2 in
- Spindle Screw Size: 1 1/4 in
- Phase: Single-Phase
- Speed Setting: Variable Speed
- Number of Pieces: 5
- Core Drill Type: Core Drill Rig
- Maximum Speed: 900 RPM
- Country of Origin (subject to change): United States
Related Products
Rotary Tool, Voltage 12V DC, Max. Speed 32,000 RPM, Speed Setting Variable Speed, Collet Size 1/8 in, Brushless Motor No, Cordless Tool Kit Contents Bare Tool, Lock-Off Switch Yes, Lock-On Switch Yes, Switch Type Slide On Off with Speed Dial, Number of Speed Settings Continuous, Minimum Speed 5,000 RPM, Adjustable Collet Yes, Accessory Free Tool Change No, Accessory Kit Included No, Overall Length 9 in, Tool Weight 0.9 lb, Power Source Cordless, Number of Batteries Included 0
The most compact drill driver in its class is more powerful than the competition. Built with a Milwaukee® 4-pole frameless motor, the M18TM compact 1/2 in. drill driver delivers 500 in-lbs of torque and up to 1,800 RPM. At only 7-1/4 in. length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2 in. metal chuck provide maximum durability, even on the most challenging work sites.
Delivers up to 3X more runtime, 20% more power and 2X more life than standard lithium-ion batteries. The M12TM REDLITHIUMTM XC6.0 compact battery pack features superior pack construction, electronics and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. With Milwaukee durability built into each pack, this battery runs cooler and performs in climates below 0°F/-18°C. Managed by Milwaukee's exclusive REDLINKTM Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Upgrade to the M12TM REDLITHIUMTM XC6.0 extended capacity battery pack to instantly increase the runtime and durability of your Milwaukee M12 cordless tools.
Jobsite Cordless Fan, Voltage 18 V, Bare Tool, Cordless Tool Battery Type Li-Ion, Non-Oscillating, Number of Speeds 3, Air Flow 284 cfm, Cordless, Height 14 1/16 in, Length 10 9/32 in, Width 7 9/64 in
With the introduction of the new M4TM 2-speed screwdriver, Milwaukee Tool commits to a new line of cordless products in the 4 V category utilizing the company’s REDLITHIUM 2.0 battery technology. The new screwdriver incorporates the latest Milwaukee core technologies in motor, REDLITHIUMTM intelligence electronics and REDLITHIUM 2.0 batteries, increasing the tool’s power and run-time, while shrinking its size. Featuring 44 in-lbs of peak torque and a 21-position clutch with auto shut-off, the new screwdriver offers improved torque control during repetitive applications. Two speeds, 200 and 600 RPM, offer further user control for precision work. At only 244 millimeters in length and under one pound, the M4TM screwdriver is easy to use with one hand, featuring 1/4 in. quick-change chuck for one-handed bit changes.
The (2696-26) M18TM cordless lithium-ion 6-tool Combo kit includes the 1/2 in. hammer drill / driver (2602-20), SAWZALL® Reciprocating Saw (2621-20), circular saw (2630-20), 1/4 in. hex impact driver (2650-20), 4.5 in. cut-off/grinder (2680-20), and work light (49-24-0171). The M18TM cordless lithium-ion system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by Red LithiumTM the M18TM cordless system delivers more torque, more power, and longer run-time than the competition.
The 2767 M18 FUELTM high torque 1/2 in. impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry’s most compact cordless high torque impact wrench at 8.39 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROLTM with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
The M18TM REDLITHIUMTM HIGH OUTPUTTM XC6.0 battery pack provides 50% more power and runs 50% cooler vs M18TM REDLITHIUMTM XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18TM products. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18TM REDLITHIUMTM HIGH OUTPUTTM XC6.0 provides increased power in extreme cold weather conditions (below 0F / -18C) and delivers more work per charge, driving corded replacement on the jobsite. The REDLITHIUMTM HIGH OUTPUTTM XC6.0 battery is fully compatible with 150+ M18TM solutions.
Battery, Battery Capacity 3 Ah, Battery Chemistry Li-Ion, Charger Included No, Number of Batteries Included 1, Voltage 28V DC, Cordless Tool Kit Contents (1) Battery, Automatic Shut-Off No, Battery Series M28 Lithium-Ion, Cordless Tool Battery Platform M28, V28, Wireless Tool Tracking No
Ratchet, Cordless Tool Kit Contents (1) Bare Tool, Cordless, Voltage 12V DC, Brushless Motor Yes, Fastening Torque 60 ft-lb, Free Speed 175 RPM, Drive Size 1/2 in Square, Side to Center 1 in, Head Height 1 3/4 in, Head Width 1 5/8 in, Retainer Type Ball Detent, Handle Type Pistol Grip, Number of Batteries Included 0, Battery Series M12 Redlithium, Charger Included No, Case Included No, Overall Length 11 1/2 in, Wireless Tool Tracking No, Tool Brand Milwaukee, Series M12 FUEL(TM)
Optimized for the professional who frequently encounters precision fastening applications, the Milwaukee® M12TM 1/4 in. hex screwdriver delivers unmatched precision, power and portability along with a slimmer, more ergonomic grip. A variable speed trigger and 0-500RPM give the user unrivaled fastening control, 15+1 clutch settings prevent over tightening fasteners, and 175 in-lbs. Of torque provides the ability to accomplish tough applications. At 6-1/2 in. long and weighing only 2.0 lbs; its compact, lightweight and durable design provides greater comfort and fits in tighter spaces on the jobsite. The inboard LED light and fuel gauge help you increase productivity and avoid interruptions. Two belt-clip positions for both left- and right-handed users and one-handed bit changes provide maximum ease-of-use. The REDLITHIUMTM battery pack delivers more work per charge and more work over pack life than the competitors.
The 2864 M18TM FUELTM w/ONE-KEYTM high torque 3/4 in. impact wrench with friction ring provides the most powerful, most compact, and the most repeatable impact wrench in the industry! The POWERSTATETM brushless motor delivers up to 1,200ft-lbs of fastening torque and 1500ft-lbs of nut-busting torque, providing users a cordless solution that will eliminate the need for corded impact wrenches. The industry’s most compact cordless high torque impact wrench at 8.59 in. in length, this tool allows for more access in tight spaces. REDLINK PlusTM intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUMTM batteries deliver more work per charge and more work over the life of the battery. Compatible with one-key, this is the industry’s first high torque impact wrench that wirelessly connects to a smart phone to customize, track and manage a tool’s performance and location. Unlimited tool customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. With ONE-KEYTM, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The tool’s memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time.
Reviews
There are no reviews yet.