Powermatic Floor Drill Press, Belt Drive, 1 hp, 115/230 V, 18 in Swing, Variable Speed
Original price was: $476.00.$93.99Current price is: $93.99.
General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 18 in, Spindle Taper JT3/MT2, Motor HP 1 hp, Capacity Steel Not Specified, Capacity Cast Iron Not Specified, Drilling Capacity Wood Not Specified, Power Down Feed Included No, Voltage 115/230, Amps AC 15.0/7.5, Number of Speeds Variable, Chuck Size 5/8 in, Spindle Speed 250 to 3000 rpm, Spindle Travel 6 in, Base Size 13-3/8 in x 20 in, Table Work Surface 20 in x 14 in, Hz 60, Phase 1, Number of T-Slots 0
Powermatic #1792800B Specifications
- Zoro #: G0468907
- Mfr #: 1792800B
- Drill Press Product Grouping: General Purpose Drill Presses
- Item: Floor Drill Press
- Drive Type: Belt
- Swing: 18 in
- Voltage: 115/230
- Motor HP: 1 hp
- Chuck Size: 5/8 in
- Number of Speeds: Variable
- Capacity Steel: Not Specified
- Spindle Speed: 250 to 3000 rpm
- Corded/Cordless: Corded
- Phase: 1
- Overall Height: 71 in
- Spindle Taper: MT2
- Number of T-Slots: 0
- Capacity Cast Iron: Not Specified
- Spindle to Table: 30 in
- Max. Spindle To Base: 27 3/8 in
- Table Work Surface: 20 in x 14 in
- Corded/Banded: Corded
- Hz: 60
- Table Slot Size: 3/8 in
- Overall Width: 20 1/4 in
- Power Down Feed Included: No
- Base Size: 13-3/8 in x 20 in
- Column Dia.: 3 1/8 in
- Drilling Capacity Wood: Not Specified
- Spindle Travel: 6 in
- Overall Depth: 18 in
- Amps AC: 15.0/7.5
- Includes: Keyed Chuck
- Quill Diameter: 2 19/32 in
- Base Length: 13 1/2 in
- Drill Press Application: Drilling
- Maximum Overall Height: 71 in
- Number of Spindle Speeds: Variable
- Chuck Capacity: 5/8 in
- Maximum Spindle-to-Table Height: 26 5/8 in
- Drilling Capacity in Stainless Steel: 1/2 in
- Speed Range: 250 to 3,000 RPM
- Overall Length: 18 in
- Nominal Voltage: 115/230V AC
- Coolant System: No
- Maximum Spindle Speed: 3,000 RPM
- Speed Adjustment: Variable Speed Pulley
- Power Source: Corded
- Drilling Capacity in Wood: 5/8 in
- Guard Included: No
- Base Width: 20 1/2 in
- Primary Material Application: Wood
- Drilling Capacity in Steel: 1/2 in
- Radial Arm: No
- Chuck Style: Keyed
- Table Width: 14 in
- Horsepower: 1 hp
- Spindle Speed Range: 250 RPM – 3,000 RPM
- Table Shape: Rectangular
- Column Diameter: 3 1/8 in
- Current: 15/7.5 A
- Table Tilt: 90 Degrees Left and Right
- Minimum Spindle Speed: 250 RPM
- Speed Control – Merch: Variable Speed
- Maximum Spindle-to-Base Height: 44 3/4 in
- Drill Press Type: Floor Stand
- Motor Voltage: 115/230V AC ; Single-Phase
- Table Slot Width: 3/8 in
- Speed Control: Variable
- Table Length: 20 1/4 in
- Country of Origin (subject to change): China
Related Products
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1000, 8.5 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 11 1/8 in, Tool Weight 4.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes Side Handle
Powermatic 8In. Parallelogram Jointer 2H
When you need to drill a hole in concrete, this Milwaukee 4096 Diamond Coring Motor is the perfect tool for the job. The high-performance motor has a 4 4/5 hp and will deliver 450/900 RPM. The water swivel allows you to twist the cord into a position that prevents tangling and kinking. Clutch protection ensures that the core bit is not damaged by sudden stops or starts when drilling through concrete. This diamond coring rig motor has 20 amps and 120V AC voltage. It is corded and comes with a 10 in. core bit cap for concrete work. It also features an ergonomic handle with trigger switch for easy operation, as well as built-in overload protection that protects against overheating or burning out of your tool due to overload conditions on the job site. The Milwaukee Diamond Coring Rig Motor is one of those tools you just can't live without once you have used it.
Drill Kit, Handle Style D-Handle, Chuck Size 1/2 in, No Load RPM 0 to 600/0 to 900, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 16 1/4 in, Tool Weight 10.3 lb, Gear Train Quadruple, Switch Type Trigger, Reversible Yes, Cord Length 8 ft, Features Carrying Case, Head and Handle Swivel 360 Degrees , Side Handle, Includes (1) Carrying Case, (1) RAD Assembly, (1) Side Handle
Drill Kit, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 2500, 8.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyless, Tool Length 12 3/4 in, Tool Weight 4.1 lb, Gear Train Single, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 2-Conductor, Includes Belt Hook, Heavy-Duty Kit Bag. The DWD110K 3/8" VSR Pistol Grip Drill Kit with Keyless Chuck has a powerful 8 Amp motor to deliver 0-2,500 rpm speed for heavy-duty applications. Features solid bit retention and a soft grip handle design for comfort.
Swing Away Safety Guard, Max. Chuck Dia. (In.) 4 in, Max. Stroke (In.) 7 in, Min. Stroke (In.) 3 in, White
Lathe, Distance Between Centers 42 in, Voltage 220, Horsepower 3, Min. Spindle Speed 40 RPM, Overall Height 65 in, Overall Length 89 in, Overall Width 28 in, Max. Spindle Speed 3,500 RPM, Tailstock Taper MT2
Drill, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 2800, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 10 in, Tool Weight 3.6 lb, Gear Train Single, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features Compact and Lightweight Design, Lock-On, Includes Chuck Key. The DWE1014 3/8" 0-2,800 rpm VS Drill with Keyed Chuck is compact and lightweight to increase comfort and reduce fatigue. Powerful 7 Amp motor drills at high speed according to the user's desired setting.
Jointer, Jointing Capacity (In.) 12 in, Rabbeting Capacity (In.) 3/4 in, Depth of Cut (In.) 3/4 in, HP 3 hp, 6.5 A Amps, 60 Hz, Table Length (In.) 84 in, Table Width (In.) 12 in, Tilting Angle (Deg.) 45L, 45R, 90, No Load RPM 5,000 RPM, Head Helical, Cast Iron/Metal
Switch, For Use With Mfr. Model Number 11216 EVS, Fits Brand Bosch
Drill Press Guard, Guard Style Telescoping, For Quill Diameter 1 3/4 in to 3 in, Guard Shape Curved, Guard Height 3 1/2 in to 6 1/4 in, Guard Width 4 5/8 in, Mount Type Drill-to-Fit, Body Material Polycarbonate
This heavy duty magnum drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 amp motor, 0 to 850 RPM trigger speed control, reversing, and a Quik-Lok cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites.
Reviews
There are no reviews yet.