The Hardin 1 1/2 inch (V40) full bullnose shaping and polishing profile package is the ideal combination of tools used to produce a 1 1/2 inch full bullnose decorative edge on tile, granite and concrete counter tops and other natural stone and hard surfaces 1 1/2 inch in thickness only. This kit includes a Hardin 4 inch variable speed wet polisher, 1 1/2 inch full bullnose diamond profile wheel and a complete set of 4 inch premium diamond polishing pads. The polishing pad set includes 1 each 50, 100, 200, 400, 800, 1500, 3000 grit polishing pads and a 10,000 grit final buff pad. This set also includes the rubber backer pad needed to attach the diamond pads to the polisher

The Hardin 1-1/4 inch (V30) full bullnose shaping and polishing profile package is the ideal combination of tools used to produce a 1 1/4 inch full bullnose decorative edge on tile, granite and concrete counter tops and other natural stone and hard surfaces 1 1/4 inch in thickness only. This kit includes a Hardin 4 inch variable speed wet polisher, 1 1/4 inch full bullnose diamond profile wheel and a complete set of 4 inch premium diamond polishing pads. The polishing pad set includes 1 each 50, 100, 200, 400, 800, 1500, 3000 grit polishing pads and a 10,000 grit final buff pad. This set also includes the rubber backer pad needed to attach the diamond pads to the polisher

The 110 volt SECCO 4" variable speed wet polisher is a low rpm (1000-4000) water feed angle grinder. The use of this tool is required when polishing with diamond tools which require the use of water and low RPM's. SECCO has been providing quality tools to concrete and granite fabrication professionals for years. This unit is equipped with an 800 watt 8 amp motor and features a variable speed dial located at the rear of the grinder. The RPM range of this unit is 1000-4000 rpm. The polisher has a quick connect brass coupling and is supplied with all necessary hoses and connectors to hook up a standard garden hose. The arbor is 5/8-11 UNC thread and is compatible with all 5/8 threaded and non threaded tools. At high speed, this is the ideal tool for fast stock removal using diamond grinding wheels, zero tolerance wheels, diamond edge profile wheels, finger bits and diamond hole saws.

Hardin WP800-220 4" Variable Speed 220V, 1000-4000 RPM Wet Polisher and Grinder 800 Watt 5/8"x11 Spindle (WVGRIN220). The 4" variable speed wet polisher is a low rpm (1000-4000) water feed angle grinder. The use of this tool is required when polishing with diamond tools which require the use of water and low RPM's. Hardin has been providing quality tools to concrete and granite fabrication professionals for years. This unit is equipped with an 800 watt 8 amp motor and features a variable speed dial located at the rear of the grinder. The RPM range of this unit is 1000-4000 rpm. The polisher has a quick connect brass coupling and is supplied with all necessary hoses and connectors to hook up a standard garden hose. The arbor is 5/8-11 UNC thread and is compatible with all 5/8 threaded and non threaded tools. At high speed, this is the ideal tool for fast stock removal using diamond grinding wheels, zero tolerance wheels, diamond edge profile wheels, finger bits and diamond hole saws.

The Secco Dual Vac System supplied with this set confines both dust and water in a controlled environment. While polishing on site, the need to keep water spray from damaging expensive wooden floors and cabinets can be challenging. Concrete dust can also be difficult to clean and is dangerous to breathe. With the Dual Vac System, these damaging and toxic materials are contained and removed by simply hooking up your shop vac. To work with the shroud, simply attach the 6 inch DVS shroud to the wet polisher and attach your shop vac to the 1 1/4 inch vacuum adapter. After attaching your choice of tooling, set the tool flat and adjust the removable apron to the proper position. In addition to protecting your health and your working environment from damage, controlling the dust and water protects the tools internal bearings, armatures and electrical connections. The DVS system is compatible with all 4 and 5 inch diamond polishing pads, threaded backer pads and diamond cup wheels.

Hardin BRTVSP4KIT VSP5 5" Var Speed Polisher, 4" Backer Pad & 7pc 4" 3 mm Wet Prem Diam Pol Pad Set (50, 100, 200 400, 800, 1500 & 3000 Grit).

Hardin BRTEB680KIT VSP5 5" Var Speed Polisher, 4" Diamond Turbo Grinding Cup Wheel, 4 pc Electroplated Hand Polishing Pad Set, 8 pc 5" Diamond Polishing Pad Set & Kit.