Ridge Tool Company Power Threading/Receding Threader Model 65R Dies, RIDGID 38100
Original price was: $153.32.$92.99Current price is: $92.99.
RECEDING THREADERS PIPE DIES FOR 65R-C & 65R-TC RATCHET THREADERS
Ridge Tool Company #38100 Specifications
- Zoro #: G302581099
- Mfr #: 38100
- Country of Origin (subject to change): United States
Related Products
RIDGID® C-22 CABLE W/ DROP HEAD AUGER, 50'L X 5/16"W CABLE 50' (15.2M) WITH DROP HEAD AUGER
12R 3/4"NPT DIE HEAD COM <ul> ALL DIE HEADS COMPLETE COME WITH SELECTED DIES AND ARE SET AT THE FACTORY</ul>
1/2" – 2" NPT, 115V, 25 -60 HZ <ul> 300 COMPACT SHOWN WITH MODEL 250 FOLDING WHEEL STAND HEAVY-DUTY PROVEN PERFORMANCE LIGHTWEIGHT, PORTABLE DESIGN FAST TRANSPORTING AND SET-UP SELF-CONTAINED OIL SYSTEM WITH ADJUSTABLE FLOW CONTROL VERSATILITY FOR THREADING AND GROOVING MOTOR CONTROL: HEAVY DUTY ROTARY FOR/OFF/REV WITH INTEGRAL FOOT SWITCH CHUCK: HAMMER-TYPE WITH REPLACEABLE, ROCKER-ACTION JAW INSERTS OILING SYSTEM: THROUGH-THE-HEAD, WITH INTEGRAL OIL RESERVOIR, SELF-PRIMING, CONSTANT-FLOW, GEROTOR PUMP CUTTER: MODEL 360, ROLL-TYPE CUT OFF, SELF-CENTERING, FULL-FLOATING REAMER: MODEL 344, 1/8"-2", FIVE FLUTE CONE, RIGHT HAND ONLY INCLUDES: 1-NO. 811A QUICK-OPENING DIE HEAD, 1-NO. 344 REAMER, 1-NO. 360 CUTTER W/E-1032 CUTTER WHEEL, 1-SET 1/2 – 3/4 IN. UNIVERSAL ALLOY DIES, 1-SET 1 – 2 IN. UNIVERSAL ALLOY DIES, 1-GALLON NU-CLEAR OIL, MODEL 250 FOLDING WHEEL STAND</ul>
RIDGID® KJ-1750 ELECTRIC JETTER W/DUAL PULSE & H-30 CART THIS JETTER PROPELS A HIGHLY FLEXIBLE HOSE THROUGH 1 1/4" TO 4" (32 TO 100MM) LINES¿BLASTING THROUGH SLUDGE, SOAP AND GREASE BLOCKAGES. AS YOU PULL THE HOSE BACK, IT POWER SCRUBS THE LINE, FLUSHING DEBRIS AWAY AND RESTORING DRAIN LINES TO THEIR FREE-FLOWING CAPACITY. FEATURES: <ul> POWERFUL: ACTUAL WORKING PRESSURE OF 1750 PSI AND FLOW OF 1.4 GPM (5.3 L/MIN) FOR FAST, EFFECTIVE CLEANING OF LINES. PULSE ACTION: TWO LEVELS OF PULSE ARE STANDARD. ACTIVATE THE KJ-1750'S PULSE ACTION TO EASILY NEGOTIATE DIFFICULT BENDS AND TRAPS. PORTABLE: THE OPTIONAL H-30 CART ROLLS THE JETTER AND HOSE TO THE JOB SITE. THE JETTER IS EASILY REMOVED FROM THE CART IN SECONDS FOR HARD TO REACH DRAIN OR FOR REMOTE STORAGE. OPTIONAL ADAPTER ALLOWS THE KJ-1750 TO BE MOUNTED ON THE COMPACT H-10 CART. ELECTRICAL REQUIREMENT: THE 2.0 HP MOTOR DRAWS A MAXIMUM OF 17 AMPS WHICH REQUIRES A 20 AMP, 115V CIRCUIT. EASY TO USE: THRUST PROPELS THE HOSE DOWN THE LINE. YOU SIMPLY GUIDE THE HOSE INTO THE DRAIN. HIGH QUALITY: DUPLEX PUMP WITH CORROSION-RESISTANT, FORGED BRASS HEAD. NEW PRESSURE CONTROL VALVE ALLOWS QUICK AND EASY PRESSURE ADJUSTMENT. DEPENDABLE: REDUCED NUMBER OF FITTINGS, HOSES AND PARTS MINIMIZES LEAKS AND DOWN TIME KEEPING YOU ON THE JOB. VERSATILE: OPTIONAL POWER WASHER PACKAGE CLEANS CABLES, TOOLS AND OTHER HEAVILY SOILED EQUIPMENT. CSA APPROVED. APPROVED TO UL STANDARDS (NRTLC). INCLUDES <ul> KJ-1750 JETTER WITH DUAL PULSE H-41, H-42, AND H-44 1/8" NPT NOZZLES H-51 AND H-52 1/4" NPT NOZZLES 50' X 1/8" (15.2 M X 3.2 MM) SINK TRAP HOSE NYLON STORAGE BAG NOZZLE CLEANING TOOL H-30 CART 110' X 1/2" (33.5 M X 6.4 MM) JET HOSE</ul></ul>
RIDGID® K-40 SINK MACHINE W/INNER CORE W/BULB AUGER, 115V, 35'L X 5/16"W CABLE, AUTOFEED <ul> FEATURES: DUAL FEED ADVANCED TWO WAY FEED KEEPS HANDS OFF CABLE, ADVANCES AND RETRIEVES WITH PUSH OF A LEVER. REDUCES JOB TIME BY 25% GUIDE HOSE-AUTOFEED COMPLETELY COVERS SPINNING CABLE. PROTECTS PORCELAIN SURFACES AND GREATLY REDUCES JOB SITE CLEANUP. DUAL POSITION THE K-40 SITS FLAT ON THE FLOOR, COUNTERTOP, OR TIPS ONTO ITS BACK FOR EASY ACCESS TO ELEVATED DRAINS. QUIET AND POWERFUL 1/8 HP INDUCTION MOTOR QUIETLY DELIVERS ENOUGH TORQUE TO CLEAR EVEN THE TOUGHEST BLOCKAGES. BATTERY POWERED OPTION CONVENIENT K-40B (BATTERY) ELIMINATES EXTENSION CORDS AND IMPROVES PORTABILITY. WEIGHS 8 LBS. LESS THAN STANDARD K-40. PREMIUM QUALITY, COMPRESSION WOUND INNER CORE CABLE RESISTS KINKING AND COMBINES STRENGTH AND FLEXIBILITY. TWO-PIECE TWIST LOCK DRUM HOUSING ALLOWS EASY ACCESS TO THE INNER DRUM AND CABLE AND WILL NOT DENT OR CORRODE.</ul>
RIDGID® K-6200 W/INNER CORE CABLES, 4/10HP, 5.6AMPS, AC, 100'L X 5/8"W CABLE, 285RPM FOR 3 TO 6 (75-150MM) DRAIN/SEWER LINES. SUPERIOR MANEUVERABILITY AND A SMALL FOOTPRINT ALLOW EASY ACCESS TO TIGHT WORK AREAS. THE K-6200 COMES EQUIPPED WITH IC (INNER CORE) CABLE. <ul> FEATURES: PATENTED CABLE CONTROL SYSTEM ? CAUSES THE DRUM TO SLOW DOWN WHEN THE BLADE BECOMES LODGED IN A BLOCKAGE. LIMITS POTENTIAL FOR CABLE FLIPOVER. DIRECT DRIVE DESIGN ? 4/10 HP UNIVERSAL MOTOR AND GEARBOX BEAR DOWN AS TORQUE BUILDS. AUDIBLE WARNINGS LET OPERATOR KNOW WHEN BLOCKAGE IS ENCOUNTERED. DRUM REQUIRES NO ADJUSTMENTS TO STAY ALIGNED AND TIGHT ON DRIVE SHAFT. EASY MAINTENANCE CONSTRUCTION ? SEPARATE DRUM AND MACHINE IN SECONDS. INNER DRUM AND GUIDE TUBE REMOVE EASILY TO MAINTAIN OR REPLACE CABLE. DESIGNED DURABLE AND STABLE ? LOW CENTER OF GRAVITY FRAME DESIGN AND CUSTOM KICKSTAND KEEP MACHINE FIRMLY ANCHORED DURING OPERATION. RUGGED, CORROSION-RESISTANT POLYETHYLENE DRUM IS RUST AND DENT PROOF. DOUBLE TUBULAR FRAME IS LIGHTWEIGHT AND DESIGNED FOR EXTRA STRENGTH. AUTOFEED AND STANDARD ACCESSORIES ? POWERFUL FEED MECHANISM IS BUILT TO LAST AND IS EASILY MAINTAINED. AUTOFED, TOOLBOX AND SELECTION OF CUTTERS INCLUDED IN ALL MODELS. STANDARD ACCESSORIES: T-406 SPADE CUTTER, T-411 2 DOUBLE CUTTER, T-413 3 DOUBLE CUTTER, T-414 4 DOUBLE CUTTER, T-458 5/8 X 2? TRAP LEADER, PAIR RECLINING LEGS AND DRAIN CLEANING GLOVES. CSA APPROVED. APPROVED TO UL STANDARDS (NRTLC).</ul>
RIDGID® 82837 H-45 1/8" NPT SPINNING NOZZLE FOR KJ-1750 WATER JETTER FEATURES: <ul> SPINNING ACTION CLEANS THE ENTIRE INTERIOR OF PIPE SURFACE. THREE REVERSE JETS PROVIDE PROPULSION. FOR USE WITH KJ-1750 ELECTRIC WATER JETTERS MODEL H-45 1/8" NPT FITS 1/8" AND 3/16" HOSES</ul>
RIDGID® C-5 CABLE W/ BULB AUGER, 35'L X 3/8"W CABLE 35' (10.7M) WITH BULB AUGER
RIDGID® MODEL NO. 300 COMPACT COMPACT THREADING MACHINE, 1/2"-2" NPT, 115V, 50/60 HZ HEAVY-DUTY PROVEN PERFORMANCE. LIGHTWEIGHT, PORTABLE DESIGN. FAST TRANSPORT AND SET-UP. SELF-CONTAINED OIL SYSTEM WITH ADJUSTABLE FLOW CONTROL. VERSATILITY FOR THREADING AND GROOVING. QUIET OPERATION. APPROVED BY CSA TO CSA AND UL STANDARDS (115V ONLY). SPECIFICATIONS: <ul> PIPE CAPACITY: 1/8" – 2" (3MM-50MM). BOLT CAPACITY: BOLT: 1/4" – 2" (6MM-50MM). MOTOR: 1/2 HP, 115V UNIVERSAL 50/60 HZ. MOTOR CONTROL: HEAVY DUTY ROTARY FOR/OFF/REV WITH INTEGRAL FOOT SWITCH. SPINDLE SPEED: 38 RPM (52 RPM AVAILABLE). CHUCK: HAMMER-TYPE WITH REPLACEABLE, ROCKER-ACTION JAW INSERTS. OILING SYSTEM: THROUGH-THE-HEAD, WITH INTEGRAL OIL RESERVOIR. SELF-PRIMING, CONSTANT-FLOW, GEROTOR PUMP. CUTTER: MODEL 360, ROLL-TYPE CUTOFF, SELF-CENTERING, FULL-FLOATING. REAMER: MODEL 344, 1/8"-2", FIVE FLUTE CONE, RIGHT HAND ONLY. STANDARD EQUIPMENT ONE NO. 811A QUICK-OPENING DIE HEAD. ONE SET 1/2" – 3/4" ALLOY UNIVERSAL DIES. ONE SET 1"- 2" ALLOY UNIVERSAL DIES ONE NO. 360 CUTTER WITH E-1032 CUTTER WHEEL. ONE NO. 344 REAMER. ONE GALLON NU-CLEAR THREADING CUTTING OIL DOES NOT INCLUDE STAND.</ul>
UNIVERSAL WHEEL & TRAY STAND <ul> STANDS SHOWN BELOW CAN BE USED ON RIDGID® THREADING MACHINE MODEL NOS. 300 COMPACT, 535, 1224, AND 1822</ul>
RIDGID® 36345 EXPOSED RATCHET THREADER SET, 1/2"-1" CAPACITY NPT RIDGID MODEL NO. 00-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-1" CAPACITYNO. 00-R: CAPACITY 1/8"-1" WITHOUT CARRYING CASE
RIDGID® C-2 CABLE W/ DROP HEAD AUGER, 25'L X 5/16"W CABLE 25' (7.6M) WITH DROP HEAD AUGER
Reviews
There are no reviews yet.