Ridge Tool Company RIDGID® 1-1/4" – 1-1/2" Pipe Roll Set For Use With 915 Drive & Groove
Original price was: $564.00.$97.99Current price is: $97.99.
RIDGID® 1-1/4" – 12" PIPE ROLL SET FOR USE WITH 915 DRIVE & GROOVE RIDGID 915 DRIVE & GROOVE ROLL SET FOR 1-1/4" – 12"
Ridge Tool Company #92437 Specifications
- Zoro #: G902714545
- Mfr #: 92437
- Country of Origin (subject to change): United States
Related Products
RIDGID® 82837 H-45 1/8" NPT SPINNING NOZZLE FOR KJ-1750 WATER JETTER FEATURES: <ul> SPINNING ACTION CLEANS THE ENTIRE INTERIOR OF PIPE SURFACE. THREE REVERSE JETS PROVIDE PROPULSION. FOR USE WITH KJ-1750 ELECTRIC WATER JETTERS MODEL H-45 1/8" NPT FITS 1/8" AND 3/16" HOSES</ul>
RECEDING THREADERS PIPE DIES FOR 65R-C & 65R-TC RATCHET THREADERS
RIDGID® KJ-1750 ELECTRIC JETTER W/DUAL PULSE & H-30 CART THIS JETTER PROPELS A HIGHLY FLEXIBLE HOSE THROUGH 1 1/4" TO 4" (32 TO 100MM) LINES¿BLASTING THROUGH SLUDGE, SOAP AND GREASE BLOCKAGES. AS YOU PULL THE HOSE BACK, IT POWER SCRUBS THE LINE, FLUSHING DEBRIS AWAY AND RESTORING DRAIN LINES TO THEIR FREE-FLOWING CAPACITY. FEATURES: <ul> POWERFUL: ACTUAL WORKING PRESSURE OF 1750 PSI AND FLOW OF 1.4 GPM (5.3 L/MIN) FOR FAST, EFFECTIVE CLEANING OF LINES. PULSE ACTION: TWO LEVELS OF PULSE ARE STANDARD. ACTIVATE THE KJ-1750'S PULSE ACTION TO EASILY NEGOTIATE DIFFICULT BENDS AND TRAPS. PORTABLE: THE OPTIONAL H-30 CART ROLLS THE JETTER AND HOSE TO THE JOB SITE. THE JETTER IS EASILY REMOVED FROM THE CART IN SECONDS FOR HARD TO REACH DRAIN OR FOR REMOTE STORAGE. OPTIONAL ADAPTER ALLOWS THE KJ-1750 TO BE MOUNTED ON THE COMPACT H-10 CART. ELECTRICAL REQUIREMENT: THE 2.0 HP MOTOR DRAWS A MAXIMUM OF 17 AMPS WHICH REQUIRES A 20 AMP, 115V CIRCUIT. EASY TO USE: THRUST PROPELS THE HOSE DOWN THE LINE. YOU SIMPLY GUIDE THE HOSE INTO THE DRAIN. HIGH QUALITY: DUPLEX PUMP WITH CORROSION-RESISTANT, FORGED BRASS HEAD. NEW PRESSURE CONTROL VALVE ALLOWS QUICK AND EASY PRESSURE ADJUSTMENT. DEPENDABLE: REDUCED NUMBER OF FITTINGS, HOSES AND PARTS MINIMIZES LEAKS AND DOWN TIME KEEPING YOU ON THE JOB. VERSATILE: OPTIONAL POWER WASHER PACKAGE CLEANS CABLES, TOOLS AND OTHER HEAVILY SOILED EQUIPMENT. CSA APPROVED. APPROVED TO UL STANDARDS (NRTLC). INCLUDES <ul> KJ-1750 JETTER WITH DUAL PULSE H-41, H-42, AND H-44 1/8" NPT NOZZLES H-51 AND H-52 1/4" NPT NOZZLES 50' X 1/8" (15.2 M X 3.2 MM) SINK TRAP HOSE NYLON STORAGE BAG NOZZLE CLEANING TOOL H-30 CART 110' X 1/2" (33.5 M X 6.4 MM) JET HOSE</ul></ul>
1/2" – 2" NPT, 115V, 25 -60 HZ <ul> 300 COMPACT SHOWN WITH MODEL 250 FOLDING WHEEL STAND HEAVY-DUTY PROVEN PERFORMANCE LIGHTWEIGHT, PORTABLE DESIGN FAST TRANSPORTING AND SET-UP SELF-CONTAINED OIL SYSTEM WITH ADJUSTABLE FLOW CONTROL VERSATILITY FOR THREADING AND GROOVING MOTOR CONTROL: HEAVY DUTY ROTARY FOR/OFF/REV WITH INTEGRAL FOOT SWITCH CHUCK: HAMMER-TYPE WITH REPLACEABLE, ROCKER-ACTION JAW INSERTS OILING SYSTEM: THROUGH-THE-HEAD, WITH INTEGRAL OIL RESERVOIR, SELF-PRIMING, CONSTANT-FLOW, GEROTOR PUMP CUTTER: MODEL 360, ROLL-TYPE CUT OFF, SELF-CENTERING, FULL-FLOATING REAMER: MODEL 344, 1/8"-2", FIVE FLUTE CONE, RIGHT HAND ONLY INCLUDES: 1-NO. 811A QUICK-OPENING DIE HEAD, 1-NO. 344 REAMER, 1-NO. 360 CUTTER W/E-1032 CUTTER WHEEL, 1-SET 1/2 – 3/4 IN. UNIVERSAL ALLOY DIES, 1-SET 1 – 2 IN. UNIVERSAL ALLOY DIES, 1-GALLON NU-CLEAR OIL, MODEL 250 FOLDING WHEEL STAND</ul>
RIDGID 15682 MODEL 300 COMPLETE PIPE THREADING MACHINE, 115V <ul> SWITCH: HEAVY-DUTY FOR/OFF/REV AND INTEGRAL FOOT SWITCH CHUCK: RIDGID SPEED CHUCK WITH REPLACEABLE ROCKER-ACTION JAWS REAR CENTERING DEVICE: CAM-ACTION TURNS WITH CHUCK SUPPORT BAR: HEAVY-DUTY (2) INCLUDES: 1-1206 STAND, 1-311 CARRIAGE W/LEVER, 1-341 REAMER, 1-360 CUTTER, 1-811A UNIVERSAL DIE HEAD, SET 1/2 – 3/4 IN UNIVERSAL ALLOY DIES, SET 1 – 2 IN. UNIVERSAL ALLOY DIES, 1-32 TRANSPORTER, 1-418 OILER, 1-GALLON NU-CLEAR OIL</ul>
RIDGID® C-5 CABLE W/ BULB AUGER, 35'L X 3/8"W CABLE 35' (10.7M) WITH BULB AUGER
RIDGID® K-50 W/ADAPTERS & CABLE KIT, 45'L X 5/8"W, 25'L X 5/16"W, 35'L X 3/8"W CABLES, 115V MACHINE, WITH: A-17-A ADAPTER, A-17-B ADAPTER, A-30 CABLE KIT. FEATURES: COMPACT, VERSATILE, PROFESSIONAL'S MACHINE. CAPABLE OF RUNNING THREE DIFFERENT SIZE CABLES: 5/16, 3/8, AND 5/8. THE PERFECT, ALL-AROUND SINK, SHOWER AND FLOOR DRAIN MACHINE. WEIGHS LESS THAN 40 LBS. UNIQUE, EASY-TO-USE, INSTANT-ACTING CABLE CLUTCH MAXIMIZES OPERATOR CONTROL: PULL HANDLE DOWN AND CABLE SPINS AT 400 RPM. RELEASE HANDLE, CABLE STOPS INSTANTLY. USES SECTIONS OF 5/8 CABLE, CLEANS 11/4 TO 4 LINES UP TO 100 FEET. C-8 BEST FOR 1 1/4 -3 DRAINS. C-9 BEST FOR 2 – 4 DRAINS. EQUIPPED WITH AN A-17 ADAPTER, RUNS UP TO 50 FEET OF 5/16 (15M/8MM) OR 35 FEET OF 3/8 (11M/10MM) CONTINUOUS LENGTH CABLE. 5/16 BEST FOR 3/4 TO 1 1/2 LINES. 3/8 BEST FOR 11/4 TO 2 LINES. EQUIPPED WITH 1/6 HP MOTOR; 115V MODELS CSA APPROVED. APPROVED TO UL STANDARDS (NRTLC).
NPT NIPPLE CHUCK 1/2"-2" <ul> 819 NIPPLE CHUCK KIT HOLDS SHORT OR CLOSE NIPPLES FOR THREADING HOLDS STUDS FOR THREADING FOR USE WITH 300 POWER DRIVE, 300 COMPACT, 535 AND 1822 (WITH ADAPTER KIT) AND 1224 THREADING MACHINES STANDARD NIPPLE CHUCK INCLUDES INSERT AND 5 ADAPTERS: 1/2", 3/4", 1", 1-1/4", AND 1-1/2" (NIPPLE CHUCK BODY SERVES AS 2" ADAPTER)</ul>
RIDGID® MODEL NO. 300 COMPACT COMPACT THREADING MACHINE, 1/2"-2" NPT, 115V, 50/60 HZ HEAVY-DUTY PROVEN PERFORMANCE. LIGHTWEIGHT, PORTABLE DESIGN. FAST TRANSPORT AND SET-UP. SELF-CONTAINED OIL SYSTEM WITH ADJUSTABLE FLOW CONTROL. VERSATILITY FOR THREADING AND GROOVING. QUIET OPERATION. APPROVED BY CSA TO CSA AND UL STANDARDS (115V ONLY). SPECIFICATIONS: <ul> PIPE CAPACITY: 1/8" – 2" (3MM-50MM). BOLT CAPACITY: BOLT: 1/4" – 2" (6MM-50MM). MOTOR: 1/2 HP, 115V UNIVERSAL 50/60 HZ. MOTOR CONTROL: HEAVY DUTY ROTARY FOR/OFF/REV WITH INTEGRAL FOOT SWITCH. SPINDLE SPEED: 38 RPM (52 RPM AVAILABLE). CHUCK: HAMMER-TYPE WITH REPLACEABLE, ROCKER-ACTION JAW INSERTS. OILING SYSTEM: THROUGH-THE-HEAD, WITH INTEGRAL OIL RESERVOIR. SELF-PRIMING, CONSTANT-FLOW, GEROTOR PUMP. CUTTER: MODEL 360, ROLL-TYPE CUTOFF, SELF-CENTERING, FULL-FLOATING. REAMER: MODEL 344, 1/8"-2", FIVE FLUTE CONE, RIGHT HAND ONLY. STANDARD EQUIPMENT ONE NO. 811A QUICK-OPENING DIE HEAD. ONE SET 1/2" – 3/4" ALLOY UNIVERSAL DIES. ONE SET 1"- 2" ALLOY UNIVERSAL DIES ONE NO. 360 CUTTER WITH E-1032 CUTTER WHEEL. ONE NO. 344 REAMER. ONE GALLON NU-CLEAR THREADING CUTTING OIL DOES NOT INCLUDE STAND.</ul>
12R 1 1/2 NPT DIE HD COM <ul> ALL DIE HEADS COMPLETE COME WITH SELECTED DIES AND ARE SET AT THE FACTORY</ul>
RIDGID® INNER CORE CABLE, 90'L FOR USE W/K-3800 DRUM MACHINE 90' (28M) IC CABLE. GOOD FLEXIBILITY AND MORE CLEANING POWER TO THE CABLE END.
RIDGID® SPEAR BLADE FOR MODEL K-6200, K-750, & K-7500 DRUM MACHINES SPEAR BLADE
Reviews
There are no reviews yet.