Ridge Tool Company RIDGID® 88232 Model 915 Roll Groover W/2"-6" Schedule 10 Roll Set
Original price was: $488.00.$98.99Current price is: $98.99.
RIDGID® MODEL NO. 915 ROLL GROOVER W/2"-6" SCHEDULE 10 ROLL SET RIDGID MODEL NO. 915 ROLL GROOVER W/2"-6" SCHEDULE 10 ROLL SETTHE NEW RIDGID 915 ROLL GROOVER IS A MANUAL ROLL GROOVER FOR IN-PLACE FIELD APPLICATIONS. THE 915 REQUIRES ONLY 3 1/2" OF CLEARANCE TO TRAVEL AROUND A PIPE AND A MINIMUM OF 2 3/4" OF EXPOSED PIPE FOR GROOVING. WITH THE APPROPRIATE ROLL SETS, THE 915 CAN GROOVE FROM 1 1/4" TO 12" PIPE, THE WIDEST RANGE IN ITS CLASS THE 915'S CAST-IN HANDLE ALLOWS FOR EASY TRANSPORT OR CHAINING THE GROOVER DOWN TO PREVENT THEFT. THE 915 IS A MUST FOR SERVICE WORK CREWS. FEATURES LIGHTWEIGHT DESIGN ' ONLY 23 POUNDS. EASY ROLL SET CHANGE OUT ' UP TO 12" PIPE CAPACITY IN ONE UNIT FOR SERVICE VERSATILITY. CAST-IN CARRYING HANDLE ' EASY TO TRANSPORT OR LOCK UP TO PREVENT THEFT. INCLUDED RATCHET ' 90 DEGREE BEND-IN HANDLE MAKES GROOVING EASIER. AVAILABLE CUSTOMIZED TOOL BOX ' HOLDS 915 GROOVER AND ALL AVAILABLE ROLL SETS. EASY TO USE DEPTH SETTING GAUGE ' HELPS MAKE ACCURATE GROOVES. SPECIFICATIONS CAPACITY: ' 1 1/4" – 12" SCH. 10 STEEL AND STAINLESS STEEL PIPE. ' 1 1/4" – 6" SCH. 40 STEEL PIPE, 1 1/4"-2" SCH. 40 STAINLESS STEEL PIPE.' 2"- 8" K, L, M, DWV COPPER.' 1 1/4" – 6" SCH. 40 PVC. ' 1 1/2", 2 1/2" – 3" SCH. 80 PVC. OPERATION: FEED SCREW WITH 1/2" RATCHET WRENCH (INCLUDED). WEIGHT: 23 LBS. (INCLUDING RATCHET). STANDARD EQUIPMENT 915 ROLL GROOVER WITH 2" – 6" SCH. 10 (2" – 3 1/2" SCH. 40). ROLL SET RATCHET WRENCH.
Ridge Tool Company #88232 Specifications
- Zoro #: G002663170
- Mfr #: 88232
- Country of Origin (subject to change): United States
Related Products
RIDGID® INTEGRAL WOUND, 3/8" X 100' CABLE FOR USE W/INTEGRAL WOUND SOLID CORE CABLE 100' (30M) IW CABLE
RIDGID® SPEAR BLADE FOR MODEL K-6200, K-750, & K-7500 DRUM MACHINES SPEAR BLADE
RIDGID® K-40 SINK MACHINE W/INNER CORE W/BULB AUGER, 115V, 35'L X 5/16"W CABLE, AUTOFEED <ul> FEATURES: DUAL FEED ADVANCED TWO WAY FEED KEEPS HANDS OFF CABLE, ADVANCES AND RETRIEVES WITH PUSH OF A LEVER. REDUCES JOB TIME BY 25% GUIDE HOSE-AUTOFEED COMPLETELY COVERS SPINNING CABLE. PROTECTS PORCELAIN SURFACES AND GREATLY REDUCES JOB SITE CLEANUP. DUAL POSITION THE K-40 SITS FLAT ON THE FLOOR, COUNTERTOP, OR TIPS ONTO ITS BACK FOR EASY ACCESS TO ELEVATED DRAINS. QUIET AND POWERFUL 1/8 HP INDUCTION MOTOR QUIETLY DELIVERS ENOUGH TORQUE TO CLEAR EVEN THE TOUGHEST BLOCKAGES. BATTERY POWERED OPTION CONVENIENT K-40B (BATTERY) ELIMINATES EXTENSION CORDS AND IMPROVES PORTABILITY. WEIGHS 8 LBS. LESS THAN STANDARD K-40. PREMIUM QUALITY, COMPRESSION WOUND INNER CORE CABLE RESISTS KINKING AND COMBINES STRENGTH AND FLEXIBILITY. TWO-PIECE TWIST LOCK DRUM HOUSING ALLOWS EASY ACCESS TO THE INNER DRUM AND CABLE AND WILL NOT DENT OR CORRODE.</ul>
RIDGID® C-22 CABLE W/ DROP HEAD AUGER, 50'L X 5/16"W CABLE 50' (15.2M) WITH DROP HEAD AUGER
RIDGID® 36345 EXPOSED RATCHET THREADER SET, 1/2"-1" CAPACITY NPT RIDGID MODEL NO. 00-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-1" CAPACITYNO. 00-R: CAPACITY 1/8"-1" WITHOUT CARRYING CASE
RIDGID® K-400AF DRUM MACHINE W/STANDARD EQUIPMENT, 115V, 75L X 3/8W CABLE FOR 1 1/2 TO 4 (32-100MM) DRAIN LINESTHE K-400AF OFFERS SEVERAL UNIQUE, USER-FRIENDLY FEATURES TO MAKE THE TOUGHEST DRAIN CLEANING JOBS EASIER AND HASSLE-FREE. DESIGNED WITH A SLEEK PROFILE, THE K-400 IS A GREAT FIT FOR DRAIN CLEANERS, SERVICE PLUMBERS, FACILITY AND INSTITUTIONAL MAINTENANCE DEPARTMENTS AND PROPERTY MANAGEMENT COMPANIES. INTEGRATED TRANSPORT CART ALLOWS FOR EASY MOVEMENT TO AND FROM THE JOB SITE. HEAVY-DUTY, OVER-MOLDED RUBBER WHEELS EASILY NAVIGATE OVER BUMPS AND UP STAIRS. INTEGRATED TELESCOPING HANDLE PROVIDES HIGH-HANDLE HEIGHT DURING TRANSPORT. HANDLE LOCKS IN LOW POSITION DURING DRAIN CLEANING OPERATION OR DURING TRANSPORT TO MINIMIZE SPACE REQUIREMENTS. CABLE CONTROL SYSTEM CAUSES THE DRUM TO STOP SPINNING WHEN THE BLADE BECOMES LODGED IN A BLOCKAGE, LIMITS POTENTIAL FOR CABLE TO FLIP OVER IN THE DRUM AND HELPS TO INDICATE TO OPERATOR WHEN BLOCKAGES ARE ENCOUNTERED. SOLID CORE CABLE USES TOUGH INTEGRAL WOUND (IW) SOLID CORE CABLE THAT IS RUGGED AND KINK RESISTANT. <ul>K-400AF MACHINE W/GLOVES & STD. EQUIPMENT FEATURES C-32 IW 3/8 X 75' SOLID CORE (INTEGRAL WOUND) CABLE T-260 TOOL SET WITH T-202 BULB AUGER, T-205 C CUTTER, T-211 SPADE CUTTER, A-13 COUPLING PIN</ul>
RIDGID® 82837 H-45 1/8" NPT SPINNING NOZZLE FOR KJ-1750 WATER JETTER FEATURES: <ul> SPINNING ACTION CLEANS THE ENTIRE INTERIOR OF PIPE SURFACE. THREE REVERSE JETS PROVIDE PROPULSION. FOR USE WITH KJ-1750 ELECTRIC WATER JETTERS MODEL H-45 1/8" NPT FITS 1/8" AND 3/16" HOSES</ul>
BOLT THREADERS BUTTON DIES FOR OO-RB RATCHET BOLT THREADERS OR 31B, 33B, 35B, 37B 3-WAY BOLT THREADERS
RIDGID® MODEL NO. 12-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-2" CAPACITY RIDGID MODEL NO. 12-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-2" CAPACITY WITH CARRYING CASE.
RIDGID® K-6200 W/INNER CORE CABLES, 4/10HP, 5.6AMPS, AC, 100'L X 5/8"W CABLE, 285RPM FOR 3 TO 6 (75-150MM) DRAIN/SEWER LINES. SUPERIOR MANEUVERABILITY AND A SMALL FOOTPRINT ALLOW EASY ACCESS TO TIGHT WORK AREAS. THE K-6200 COMES EQUIPPED WITH IC (INNER CORE) CABLE. <ul> FEATURES: PATENTED CABLE CONTROL SYSTEM ? CAUSES THE DRUM TO SLOW DOWN WHEN THE BLADE BECOMES LODGED IN A BLOCKAGE. LIMITS POTENTIAL FOR CABLE FLIPOVER. DIRECT DRIVE DESIGN ? 4/10 HP UNIVERSAL MOTOR AND GEARBOX BEAR DOWN AS TORQUE BUILDS. AUDIBLE WARNINGS LET OPERATOR KNOW WHEN BLOCKAGE IS ENCOUNTERED. DRUM REQUIRES NO ADJUSTMENTS TO STAY ALIGNED AND TIGHT ON DRIVE SHAFT. EASY MAINTENANCE CONSTRUCTION ? SEPARATE DRUM AND MACHINE IN SECONDS. INNER DRUM AND GUIDE TUBE REMOVE EASILY TO MAINTAIN OR REPLACE CABLE. DESIGNED DURABLE AND STABLE ? LOW CENTER OF GRAVITY FRAME DESIGN AND CUSTOM KICKSTAND KEEP MACHINE FIRMLY ANCHORED DURING OPERATION. RUGGED, CORROSION-RESISTANT POLYETHYLENE DRUM IS RUST AND DENT PROOF. DOUBLE TUBULAR FRAME IS LIGHTWEIGHT AND DESIGNED FOR EXTRA STRENGTH. AUTOFEED AND STANDARD ACCESSORIES ? POWERFUL FEED MECHANISM IS BUILT TO LAST AND IS EASILY MAINTAINED. AUTOFED, TOOLBOX AND SELECTION OF CUTTERS INCLUDED IN ALL MODELS. STANDARD ACCESSORIES: T-406 SPADE CUTTER, T-411 2 DOUBLE CUTTER, T-413 3 DOUBLE CUTTER, T-414 4 DOUBLE CUTTER, T-458 5/8 X 2? TRAP LEADER, PAIR RECLINING LEGS AND DRAIN CLEANING GLOVES. CSA APPROVED. APPROVED TO UL STANDARDS (NRTLC).</ul>
NPT NIPPLE CHUCK 1/2"-2" <ul> 819 NIPPLE CHUCK KIT HOLDS SHORT OR CLOSE NIPPLES FOR THREADING HOLDS STUDS FOR THREADING FOR USE WITH 300 POWER DRIVE, 300 COMPACT, 535 AND 1822 (WITH ADAPTER KIT) AND 1224 THREADING MACHINES STANDARD NIPPLE CHUCK INCLUDES INSERT AND 5 ADAPTERS: 1/2", 3/4", 1", 1-1/4", AND 1-1/2" (NIPPLE CHUCK BODY SERVES AS 2" ADAPTER)</ul>
RIDGID® K-750 DRUM MACHINE W/ PIGTAIL, AUTOFEED & GLOVES, 3/4", 115V, 60HZ, 1/2HP, 200RPM <ul> FEATURES: POWERFUL, SELF-CONTAINED MACHINE IDEAL FOR LATERAL LINES. EASY TO TRANSPORT, MINIMAL SET-UP ATTACH A TOOL AND GO. AUTOFEED ADVANCES, RETRIEVES CABLE AUTOMATICALLY, UP TO 20' PER MINUTE. VERSATILE AUTOFEED ADJUSTS FOR CABLE WITH A TWIST OF A SCREWDRIVER. INCLUDES PVC DRAIN CLEANING GLOVES. CABLE SPINS AT 200 RPM. TOUGH, CORROSION-RESISTANT CABLE DRUM WITHSTANDS HARSH TREATMENT AND ABUSE. IT WILL NOT DENT OR CORRODE AND CLEANS EASILY. WELL-BALANCED DESIGN GIVES MACHINE A LIGHTWEIGHT "FEEL." TRANSPORT WHEELS EASE LOADING INTO SERVICE TRUCK/VAN. EQUIPPED WITH 1/2 HP INDUCTION MOTOR, 115V MODELS. CSA APPROVED. APPROVED TO UL STANDARDS (NRTLC).</ul>
Reviews
There are no reviews yet.