Ridge Tool Company RIDGID® K-6200 W/Inner Core Cables, 285RPM, 4/10HP, 5.6AMPS, AC, 100'L x 5/8"W Cable
Original price was: $504.00.$97.99Current price is: $97.99.
RIDGID® K-6200 W/INNER CORE CABLES, 4/10HP, 5.6AMPS, AC, 100'L X 5/8"W CABLE, 285RPM FOR 3 TO 6 (75-150MM) DRAIN/SEWER LINES. SUPERIOR MANEUVERABILITY AND A SMALL FOOTPRINT ALLOW EASY ACCESS TO TIGHT WORK AREAS. THE K-6200 COMES EQUIPPED WITH IC (INNER CORE) CABLE. <ul> FEATURES: PATENTED CABLE CONTROL SYSTEM ? CAUSES THE DRUM TO SLOW DOWN WHEN THE BLADE BECOMES LODGED IN A BLOCKAGE. LIMITS POTENTIAL FOR CABLE FLIPOVER. DIRECT DRIVE DESIGN ? 4/10 HP UNIVERSAL MOTOR AND GEARBOX BEAR DOWN AS TORQUE BUILDS. AUDIBLE WARNINGS LET OPERATOR KNOW WHEN BLOCKAGE IS ENCOUNTERED. DRUM REQUIRES NO ADJUSTMENTS TO STAY ALIGNED AND TIGHT ON DRIVE SHAFT. EASY MAINTENANCE CONSTRUCTION ? SEPARATE DRUM AND MACHINE IN SECONDS. INNER DRUM AND GUIDE TUBE REMOVE EASILY TO MAINTAIN OR REPLACE CABLE. DESIGNED DURABLE AND STABLE ? LOW CENTER OF GRAVITY FRAME DESIGN AND CUSTOM KICKSTAND KEEP MACHINE FIRMLY ANCHORED DURING OPERATION. RUGGED, CORROSION-RESISTANT POLYETHYLENE DRUM IS RUST AND DENT PROOF. DOUBLE TUBULAR FRAME IS LIGHTWEIGHT AND DESIGNED FOR EXTRA STRENGTH. AUTOFEED AND STANDARD ACCESSORIES ? POWERFUL FEED MECHANISM IS BUILT TO LAST AND IS EASILY MAINTAINED. AUTOFED, TOOLBOX AND SELECTION OF CUTTERS INCLUDED IN ALL MODELS. STANDARD ACCESSORIES: T-406 SPADE CUTTER, T-411 2 DOUBLE CUTTER, T-413 3 DOUBLE CUTTER, T-414 4 DOUBLE CUTTER, T-458 5/8 X 2? TRAP LEADER, PAIR RECLINING LEGS AND DRAIN CLEANING GLOVES. CSA APPROVED. APPROVED TO UL STANDARDS (NRTLC).</ul>
Ridge Tool Company #95732 Specifications
- Zoro #: G402701816
- Mfr #: 95732
- Country of Origin (subject to change): United States
Related Products
RIDGID® K-400 DRUM MACHINE W/BULB AUGER & GLOVES, 60HZ,1/3HP, 75"L X 1/2"W CABLE, 115V <ul>FEATURES: INTEGRATED TRANSPORT CART ALLOWS FOR EASY MOVEMENT TO AND FROM THE JOB SITE. HEAVY-DUTY, OVER-MOLDED RUBBER WHEELS EASILY NAVIGATE OVER BUMPS AND UP STAIRS. INTEGRATED TELESCOPING HANDLE PROVIDES HIGH-HANDLE HEIGHT DURING TRANSPORT. HANDLE LOCKS IN LOW POSITION DURING DRAIN CLEANING OPERATION OR DURING TRANSPORT TO MINIMIZE SPACE REQUIREMENTS. CABLE CONTROL SYSTEM CAUSES THE DRUM TO STOP SPINNING WHEN THE BLADE BECOMES LODGED IN A BLOCKAGE, LIMITS POTENTIAL FOR CABLE TO FLIP OVER IN THE DRUM AND HELPS TO INDICATE TO OPERATOR WHEN BLOCKAGES ARE ENCOUNTERED. SOLID CORE CABLE USES TOUGH 3/8 OR 1/2 INTEGRAL WOUND (IW) SOLID CORE CABLE THAT IS RUGGED AND KINK RESISTANT. EACH SIZE COMES IN SEVERAL LENGTHS AND UTILIZES A VARIETY OF THE RIDGID QUICK-CONNECT CUTTERS. AUTOFEED® OFFERED AS AN ACCESSORY, THIS PATENTED, AUTOMAT INNER CORE CABLE FEED POWERS CABLE IN AND OUT OF THE DRAIN. REVERSE THE DIRECTION OF THE AUTOFEED AND THE CABLE FEEDS BACK INTO THE DRUM.</ul>
RIDGID® MODEL NO. 12-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-2" CAPACITY RIDGID MODEL NO. 12-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-2" CAPACITY WITH CARRYING CASE.
1/2" – 2" NPT, 115V, 25 -60 HZ <ul> 300 COMPACT SHOWN WITH MODEL 250 FOLDING WHEEL STAND HEAVY-DUTY PROVEN PERFORMANCE LIGHTWEIGHT, PORTABLE DESIGN FAST TRANSPORTING AND SET-UP SELF-CONTAINED OIL SYSTEM WITH ADJUSTABLE FLOW CONTROL VERSATILITY FOR THREADING AND GROOVING MOTOR CONTROL: HEAVY DUTY ROTARY FOR/OFF/REV WITH INTEGRAL FOOT SWITCH CHUCK: HAMMER-TYPE WITH REPLACEABLE, ROCKER-ACTION JAW INSERTS OILING SYSTEM: THROUGH-THE-HEAD, WITH INTEGRAL OIL RESERVOIR, SELF-PRIMING, CONSTANT-FLOW, GEROTOR PUMP CUTTER: MODEL 360, ROLL-TYPE CUT OFF, SELF-CENTERING, FULL-FLOATING REAMER: MODEL 344, 1/8"-2", FIVE FLUTE CONE, RIGHT HAND ONLY INCLUDES: 1-NO. 811A QUICK-OPENING DIE HEAD, 1-NO. 344 REAMER, 1-NO. 360 CUTTER W/E-1032 CUTTER WHEEL, 1-SET 1/2 – 3/4 IN. UNIVERSAL ALLOY DIES, 1-SET 1 – 2 IN. UNIVERSAL ALLOY DIES, 1-GALLON NU-CLEAR OIL, MODEL 250 FOLDING WHEEL STAND</ul>
RIDGID® INNER CORE CABLE, 90'L FOR USE W/K-3800 DRUM MACHINE 90' (28M) IC CABLE. GOOD FLEXIBILITY AND MORE CLEANING POWER TO THE CABLE END.
RIDGID® 36345 EXPOSED RATCHET THREADER SET, 1/2"-1" CAPACITY NPT RIDGID MODEL NO. 00-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-1" CAPACITYNO. 00-R: CAPACITY 1/8"-1" WITHOUT CARRYING CASE
12R 1 1/2 NPT DIE HD COM <ul> ALL DIE HEADS COMPLETE COME WITH SELECTED DIES AND ARE SET AT THE FACTORY</ul>
RIDGID® INTEGRAL WOUND, 3/8" X 100' CABLE FOR USE W/INTEGRAL WOUND SOLID CORE CABLE 100' (30M) IW CABLE
RIDGID® C-22 CABLE W/ DROP HEAD AUGER, 50'L X 5/16"W CABLE 50' (15.2M) WITH DROP HEAD AUGER
RIDGID® C-5 CABLE W/ BULB AUGER, 35'L X 3/8"W CABLE 35' (10.7M) WITH BULB AUGER
12R 3/4"NPT DIE HEAD COM <ul> ALL DIE HEADS COMPLETE COME WITH SELECTED DIES AND ARE SET AT THE FACTORY</ul>
NPT NIPPLE CHUCK 1/2"-2" <ul> 819 NIPPLE CHUCK KIT HOLDS SHORT OR CLOSE NIPPLES FOR THREADING HOLDS STUDS FOR THREADING FOR USE WITH 300 POWER DRIVE, 300 COMPACT, 535 AND 1822 (WITH ADAPTER KIT) AND 1224 THREADING MACHINES STANDARD NIPPLE CHUCK INCLUDES INSERT AND 5 ADAPTERS: 1/2", 3/4", 1", 1-1/4", AND 1-1/2" (NIPPLE CHUCK BODY SERVES AS 2" ADAPTER)</ul>
RIDGID® C-2 CABLE W/ DROP HEAD AUGER, 25'L X 5/16"W CABLE 25' (7.6M) WITH DROP HEAD AUGER
Reviews
There are no reviews yet.