Ridge Tool Company RIDGID® KJ-1750 Electric Jetter W/Dual Pulse
Original price was: $427.00.$92.99Current price is: $92.99.
RIDGID® KJ-1750 ELECTRIC JETTER W/DUAL PULSE 1 1/4" TO 4" (32-100MM) DRAIN LINES THIS JETTER PROPELS A HIGHLY FLEXIBLE HOSE THROUGH 1 1/4" TO 4" LINES-BLASTING THROUGH SLUDGE, SOAP AND GREASE BLOCKAGES. AS YOU PULL THE HOSE BACK, IT POWER SCRUBS THE LINE, FLUSHING DEBRIS AWAY AND RESTORING DRAIN LINES TO THEIR FREE-FLOWING CAPACITY. ACTUAL WORKING PRESSURE OF 1750 PSI AND FLOW OF 1.4 GPM FOR FAST, EFFECTIVE CLEANING OF LINES. THE KJ-1750 FEATURES A DUAL PULSE TO EASILY NEGOTIATE BENDS AND TRAPS. THE 2.0 HP MOTOR DRAWS A MAXIMUM OF 17 AMPS WHICH REQUIRES A 20 AMP, 115 VOLT CIRCUIT. THRUST PROPELS THE HOSE DOWN THE LINE. YOU SIMPLY GUIDE THE HOSE INTO THE DRAIN. DUPLEX PUMP WITH CORROSION-RESISTANT, FORGED BRASS HEAD. NEW PRESSURE CONTROL VALVE ALLOWS QUICK AND EASY PRESSURE ADJUSTMENT. REDUCED NUMBER OF FITTINGS, HOSES AND PARTS MINIMIZES LEAKS AND DOWN TIME KEEPING YOU ON THE JOB. VERSATILE: OPTIONAL POWER WASHER PACKAGE CLEANS CABLES, TOOLS AND OTHER HEAVILY SOILED EQUIPMENT.CSA APPROVED. APPROVED TO UL STANDARDS (NRTLC). FOR JETTER, CART & HOSE REEL ORDER #B861782. INCLUDES<ul> H-41, H-42, H-44 1/8" NPT NOZZLES H-51 AND H-52 1⁄4" NOZZLES 50' X 1/8" SINK TRAP HOSE NYLON STORAGE BAG NOZZLE CLEANING TOOL</ul>
Ridge Tool Company #62687 Specifications
- Zoro #: G302689078
- Mfr #: 62687
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
RIDGID® MODEL NO. 300 COMPACT COMPACT THREADING MACHINE, 1/2"-2" NPT, 115V, 50/60 HZ HEAVY-DUTY PROVEN PERFORMANCE. LIGHTWEIGHT, PORTABLE DESIGN. FAST TRANSPORT AND SET-UP. SELF-CONTAINED OIL SYSTEM WITH ADJUSTABLE FLOW CONTROL. VERSATILITY FOR THREADING AND GROOVING. QUIET OPERATION. APPROVED BY CSA TO CSA AND UL STANDARDS (115V ONLY). SPECIFICATIONS: <ul> PIPE CAPACITY: 1/8" – 2" (3MM-50MM). BOLT CAPACITY: BOLT: 1/4" – 2" (6MM-50MM). MOTOR: 1/2 HP, 115V UNIVERSAL 50/60 HZ. MOTOR CONTROL: HEAVY DUTY ROTARY FOR/OFF/REV WITH INTEGRAL FOOT SWITCH. SPINDLE SPEED: 38 RPM (52 RPM AVAILABLE). CHUCK: HAMMER-TYPE WITH REPLACEABLE, ROCKER-ACTION JAW INSERTS. OILING SYSTEM: THROUGH-THE-HEAD, WITH INTEGRAL OIL RESERVOIR. SELF-PRIMING, CONSTANT-FLOW, GEROTOR PUMP. CUTTER: MODEL 360, ROLL-TYPE CUTOFF, SELF-CENTERING, FULL-FLOATING. REAMER: MODEL 344, 1/8"-2", FIVE FLUTE CONE, RIGHT HAND ONLY. STANDARD EQUIPMENT ONE NO. 811A QUICK-OPENING DIE HEAD. ONE SET 1/2" – 3/4" ALLOY UNIVERSAL DIES. ONE SET 1"- 2" ALLOY UNIVERSAL DIES ONE NO. 360 CUTTER WITH E-1032 CUTTER WHEEL. ONE NO. 344 REAMER. ONE GALLON NU-CLEAR THREADING CUTTING OIL DOES NOT INCLUDE STAND.</ul>
RIDGID® MODEL NO. 12-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-2" CAPACITY RIDGID MODEL NO. 12-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-2" CAPACITY WITH CARRYING CASE.
RIDGID® K-400 DRUM MACHINE W/STANDARD EQUIPMENT, 50"L X 3/8"W CABLE, 115V FOR 1 1/2 TO 4 (32-100MM) DRAIN LINESTHE K-400 OFFERS SEVERAL UNIQUE, USER-FRIENDLY FEATURES TO MAKE THE TOUGHEST DRAIN CLEANING JOBS EASIER AND HASSLE-FREE. DESIGNED WITH A SLEEK PROFILE, THE K-400 IS A GREAT FIT FOR DRAIN CLEANERS, SERVICE PLUMBERS, FACILITY AND INSTITUTIONAL MAINTENANCE DEPARTMENTS AND PROPERTY MANAGEMENT COMPANIES. INTEGRATED TRANSPORT CART ALLOWS FOR EASY MOVEMENT TO AND FROM THE JOB SITE. HEAVY-DUTY, OVER-MOLDED RUBBER WHEELS EASILY NAVIGATE OVER BUMPS AND UP STAIRS. INTEGRATED TELESCOPING HANDLE PROVIDES HIGH-HANDLE HEIGHT DURING TRANSPORT. HANDLE LOCKS IN LOW POSITION DURING DRAIN CLEANING OPERATION OR DURING TRANSPORT TO MINIMIZE SPACE REQUIREMENTS. CABLE CONTROL SYSTEM CAUSES THE DRUM TO STOP SPINNING WHEN THE BLADE BECOMES LODGED IN A BLOCKAGE, LIMITS POTENTIAL FOR CABLE TO FLIP OVER IN THE DRUM AND HELPS TO INDICATE TO OPERATOR WHEN BLOCKAGES ARE ENCOUNTERED. SOLID CORE CABLE USES TOUGH INTEGRAL WOUND (IW) SOLID CORE CABLE THAT IS RUGGED AND KINK RESISTANT. <ul>K-400 MACHINE W/GLOVES & STD. EQUIPMENT FEATURES C-31 IW 3/8 X 50' SOLID CORE (INTEGRAL WOUND) CABLE T-260 TOOL SET WITH T-202 BULB AUGER, T-205 C CUTTER, T-211 SPADE CUTTER, A-13 COUPLING PIN</ul>
12R 1 1/2 NPT DIE HD COM <ul> ALL DIE HEADS COMPLETE COME WITH SELECTED DIES AND ARE SET AT THE FACTORY</ul>
RIDGID® 36345 EXPOSED RATCHET THREADER SET, 1/2"-1" CAPACITY NPT RIDGID MODEL NO. 00-R EXPOSED RATCHET THREADER SET, NPT, 1/2"-1" CAPACITYNO. 00-R: CAPACITY 1/8"-1" WITHOUT CARRYING CASE
RIDGID® K-400 DRUM MACHINE W/BULB AUGER & GLOVES, 60HZ,1/3HP, 75"L X 1/2"W CABLE, 115V <ul>FEATURES: INTEGRATED TRANSPORT CART ALLOWS FOR EASY MOVEMENT TO AND FROM THE JOB SITE. HEAVY-DUTY, OVER-MOLDED RUBBER WHEELS EASILY NAVIGATE OVER BUMPS AND UP STAIRS. INTEGRATED TELESCOPING HANDLE PROVIDES HIGH-HANDLE HEIGHT DURING TRANSPORT. HANDLE LOCKS IN LOW POSITION DURING DRAIN CLEANING OPERATION OR DURING TRANSPORT TO MINIMIZE SPACE REQUIREMENTS. CABLE CONTROL SYSTEM CAUSES THE DRUM TO STOP SPINNING WHEN THE BLADE BECOMES LODGED IN A BLOCKAGE, LIMITS POTENTIAL FOR CABLE TO FLIP OVER IN THE DRUM AND HELPS TO INDICATE TO OPERATOR WHEN BLOCKAGES ARE ENCOUNTERED. SOLID CORE CABLE USES TOUGH 3/8 OR 1/2 INTEGRAL WOUND (IW) SOLID CORE CABLE THAT IS RUGGED AND KINK RESISTANT. EACH SIZE COMES IN SEVERAL LENGTHS AND UTILIZES A VARIETY OF THE RIDGID QUICK-CONNECT CUTTERS. AUTOFEED® OFFERED AS AN ACCESSORY, THIS PATENTED, AUTOMAT INNER CORE CABLE FEED POWERS CABLE IN AND OUT OF THE DRAIN. REVERSE THE DIRECTION OF THE AUTOFEED AND THE CABLE FEEDS BACK INTO THE DRUM.</ul>
RIDGID® C-22 CABLE W/ DROP HEAD AUGER, 50'L X 5/16"W CABLE 50' (15.2M) WITH DROP HEAD AUGER
RIDGID® C-2 CABLE W/ DROP HEAD AUGER, 25'L X 5/16"W CABLE 25' (7.6M) WITH DROP HEAD AUGER
RIDGID® INNER CORE CABLE, 90'L FOR USE W/K-3800 DRUM MACHINE 90' (28M) IC CABLE. GOOD FLEXIBILITY AND MORE CLEANING POWER TO THE CABLE END.
RIDGID® KJ-1750 ELECTRIC JETTER W/DUAL PULSE & H-30 CART THIS JETTER PROPELS A HIGHLY FLEXIBLE HOSE THROUGH 1 1/4" TO 4" (32 TO 100MM) LINES¿BLASTING THROUGH SLUDGE, SOAP AND GREASE BLOCKAGES. AS YOU PULL THE HOSE BACK, IT POWER SCRUBS THE LINE, FLUSHING DEBRIS AWAY AND RESTORING DRAIN LINES TO THEIR FREE-FLOWING CAPACITY. FEATURES: <ul> POWERFUL: ACTUAL WORKING PRESSURE OF 1750 PSI AND FLOW OF 1.4 GPM (5.3 L/MIN) FOR FAST, EFFECTIVE CLEANING OF LINES. PULSE ACTION: TWO LEVELS OF PULSE ARE STANDARD. ACTIVATE THE KJ-1750'S PULSE ACTION TO EASILY NEGOTIATE DIFFICULT BENDS AND TRAPS. PORTABLE: THE OPTIONAL H-30 CART ROLLS THE JETTER AND HOSE TO THE JOB SITE. THE JETTER IS EASILY REMOVED FROM THE CART IN SECONDS FOR HARD TO REACH DRAIN OR FOR REMOTE STORAGE. OPTIONAL ADAPTER ALLOWS THE KJ-1750 TO BE MOUNTED ON THE COMPACT H-10 CART. ELECTRICAL REQUIREMENT: THE 2.0 HP MOTOR DRAWS A MAXIMUM OF 17 AMPS WHICH REQUIRES A 20 AMP, 115V CIRCUIT. EASY TO USE: THRUST PROPELS THE HOSE DOWN THE LINE. YOU SIMPLY GUIDE THE HOSE INTO THE DRAIN. HIGH QUALITY: DUPLEX PUMP WITH CORROSION-RESISTANT, FORGED BRASS HEAD. NEW PRESSURE CONTROL VALVE ALLOWS QUICK AND EASY PRESSURE ADJUSTMENT. DEPENDABLE: REDUCED NUMBER OF FITTINGS, HOSES AND PARTS MINIMIZES LEAKS AND DOWN TIME KEEPING YOU ON THE JOB. VERSATILE: OPTIONAL POWER WASHER PACKAGE CLEANS CABLES, TOOLS AND OTHER HEAVILY SOILED EQUIPMENT. CSA APPROVED. APPROVED TO UL STANDARDS (NRTLC). INCLUDES <ul> KJ-1750 JETTER WITH DUAL PULSE H-41, H-42, AND H-44 1/8" NPT NOZZLES H-51 AND H-52 1/4" NPT NOZZLES 50' X 1/8" (15.2 M X 3.2 MM) SINK TRAP HOSE NYLON STORAGE BAG NOZZLE CLEANING TOOL H-30 CART 110' X 1/2" (33.5 M X 6.4 MM) JET HOSE</ul></ul>
RIDGID® K-400 DRUM MACHINE W/BULB AUGER & GLOVES, 6.7AMPS, 1/3HP, 75L X 3/8"W CABLE, 115V THE K-400 OFFERS SEVERAL UNIQUE, USER-FRIENDLY FEATURES TO MAKE THE TOUGHEST DRAIN CLEANING JOBS EASIER AND HASSLE-FREE. DESIGNED WITH A SLEEK PROFILE, THE K-400 IS A GREAT FIT FOR DRAIN CLEANERS, SERVICE PLUMBERS, FACILITY AND INSTITUTIONAL MAINTENANCE DEPARTMENTS AND PROPERTY MANAGEMENT COMPANIES. <ul>FEATURES: INTEGRATED TRANSPORT CART ? ALLOWS FOR EASY MOVEMENT TO AND FROM THE JOB SITE. HEAVY-DUTY, OVER-MOLDED RUBBER WHEELS EASILY NAVIGATE OVER BUMPS AND UP STAIRS. INTEGRATED TELESCOPING HANDLE ? PROVIDES HIGH-HANDLE HEIGHT DURING TRANSPORT. HANDLE LOCKS IN LOW POSITION DURING DRAIN CLEANING OPERATION OR DURING TRANSPORT TO MINIMIZE SPACE REQUIREMENTS. CABLE CONTROL SYSTEM ? CAUSES THE DRUM TO STOP SPINNING WHEN THE BLADE BECOMES LODGED IN A BLOCKAGE, LIMITS POTENTIAL FOR CABLE TO FLIP OVER IN THE DRUM AND HELPS TO INDICATE TO OPERATOR WHEN BLOCKAGES ARE ENCOUNTERED. INTEGRAL WOUND (IW) SOLID CORE CABLE THAT IS RUGGED AND KINKRESISTANT. EACH SIZE COMES IN SEVERAL LENGTHS AND UTILIZES A VARIETY OF THE RIDGID QUICK-CONNECT CUTTERS.</ul>
NPT NIPPLE CHUCK 1/2"-2" <ul> 819 NIPPLE CHUCK KIT HOLDS SHORT OR CLOSE NIPPLES FOR THREADING HOLDS STUDS FOR THREADING FOR USE WITH 300 POWER DRIVE, 300 COMPACT, 535 AND 1822 (WITH ADAPTER KIT) AND 1224 THREADING MACHINES STANDARD NIPPLE CHUCK INCLUDES INSERT AND 5 ADAPTERS: 1/2", 3/4", 1", 1-1/4", AND 1-1/2" (NIPPLE CHUCK BODY SERVES AS 2" ADAPTER)</ul>
Reviews
There are no reviews yet.